From wa6axe at verizon.net  Fri Nov  9 11:10:55 2018
From: wa6axe at verizon.net (Joseph Glockner)
Date: Fri, 9 Nov 2018 16:10:55 +0000 (UTC)
Subject: [Dxbase] Heads-up on Operations using the callsign TO40R (Ambiguous
	Prefix)
References: <351582456.1750625.1541779855346.ref@mail.yahoo.com>
Message-ID: <351582456.1750625.1541779855346@mail.yahoo.com>

Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ...

// TO40R //

Just saw that the callsign TO40R will be used from Guadeloupe on
11-25 November 2018. This callsign will default to France(F) because of the
Alias Map table mapping.

This callsign is not currently MAPPED in the CALLMAP table -- so, if you want,
simply make a dummy QSO with this callsign and change the PREFIX column
of your logbook mdb file to FG and then when the pop-up asks you if you want
to save this TO40R mapped to FG -- say YES/OK ---- Then delete that dummy QSO ..

The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...

73 Joe WA6AXE

From wa6axe at verizon.net  Sun Nov 18 12:12:13 2018
From: wa6axe at verizon.net (Joseph Glockner)
Date: Sun, 18 Nov 2018 17:12:13 +0000 (UTC)
Subject: [Dxbase] Heads-up on Operations using the callsign TO1A (Ambiguous
	Prefix)
References: <20194520.2790414.1542561133027.ref@mail.yahoo.com>
Message-ID: <20194520.2790414.1542561133027@mail.yahoo.com>

Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ...

// TO1A //

Just saw that the callsign TO1A will be used from French Guiana on
24-25 November 2018. This callsign will default to France(F) because of the
Alias Map table mapping.

This callsign is currently MAPPED in the CALLMAP table -- so, 
we have to go into the CALLMAP table and manually make anadjustment..
Main Menu/ Tools/ Database Access/ Country Prefixes ...
go to the CALLMAP tab .. Scrolldown to the TO1A entry and makethe following changes..
Prefix = FYOld1 PFX = FMOld1 Date = 20181101
Put your mouse cursor into the entry above or below this TO1A entry (left click) tosave it.

The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...

73 Joe WA6AXE

From wa6axe at verizon.net  Mon Nov 19 14:42:53 2018
From: wa6axe at verizon.net (Joseph Glockner)
Date: Mon, 19 Nov 2018 19:42:53 +0000 (UTC)
Subject: [Dxbase] K3NC Neal - this is yours for action please
References: <1292731671.3445401.1542656573619.ref@mail.yahoo.com>
Message-ID: <1292731671.3445401.1542656573619@mail.yahoo.com>

 From: William Snyder <kf8n at q.com>
To: 'Joseph Glockner' <wa6axe at verizon.net>
Sent: Mon, Nov 19, 2018 12:50 pm
Subject: RE: [Dxbase] Heads-up on Operations using the callsign TO1A (AmbiguousPrefix)

Please 
Take Bill Snyder of your list he has past.
Thank YOU

Bill Snyder? ? ? ? ? ? ? ? ? ? ? ? ? kf8n at q.com
Land of Coyotes, Cactus and Sunshine
? ? ? ? ? ? ? ? ? ? Tucson, AZ 
 
-----Original Message-----
From: William Snyder <kf8n at q.com>
To: 'Joseph Glockner' <wa6axe at verizon.net>
Sent: Mon, Nov 19, 2018 12:50 pm
Subject: RE: [Dxbase] Heads-up on Operations using the callsign TO1A (AmbiguousPrefix)

Please 
Take Bill Snyder of your list he has past.
Thank YOU

Bill Snyder? ? ? ? ? ? ? ? ? ? ? ? ? kf8n at q.com
Land of Coyotes, Cactus and Sunshine
? ? ? ? ? ? ? ? ? ? Tucson, AZ

-----Original Message-----
From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net]
On Behalf Of Joseph Glockner
Sent: Sunday, November 18, 2018 10:12 AM
To: dxbase at mailman.qth.net
Subject: [Dxbase] Heads-up on Operations using the callsign TO1A
(AmbiguousPrefix)

Just a heads-up about a callsign that are in the AMBIGUOUS category for
Prefixes ...

// TO1A //

Just saw that the callsign TO1A will be used from French Guiana on
24-25 November 2018. This callsign will default to France(F) because of the
Alias Map table mapping.

This callsign is currently MAPPED in the CALLMAP table -- so, we have to go
into the CALLMAP table and manually make anadjustment..
Main Menu/ Tools/ Database Access/ Country Prefixes ...
go to the CALLMAP tab .. Scrolldown to the TO1A entry and makethe following
changes..
Prefix = FYOld1 PFX = FMOld1 Date = 20181101 Put your mouse cursor into the
entry above or below this TO1A entry (left click) tosave it.

The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...

73 Joe WA6AXE
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


From wa6axe at verizon.net  Tue Nov 20 10:04:56 2018
From: wa6axe at verizon.net (Joseph Glockner)
Date: Tue, 20 Nov 2018 15:04:56 +0000 (UTC)
Subject: [Dxbase] Heads-up on Operations using the callsign TO8T (Ambiguous
	Prefix)
References: <818604858.3991265.1542726296298.ref@mail.yahoo.com>
Message-ID: <818604858.3991265.1542726296298@mail.yahoo.com>

Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ...

// TO8T //

Just saw that the callsign TO8T will be used from Martinique on
13-18 February 2019. This callsign will default to France(F) because of the
Alias Map table mapping.

This callsign is not currently MAPPED in the CALLMAP table -- so, if you want,
simply make a dummy QSO with this callsign and change the PREFIX column
of your logbook mdb file to FM and then when the pop-up asks you if you want
to save this TO8T mapped to FM -- say YES/OK ---- Then delete that dummy QSO ..

The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...

73 Joe WA6AXE

From ve3ctp at cogeco.ca  Tue Nov 20 14:01:08 2018
From: ve3ctp at cogeco.ca (Chris Pitre VE3ZO)
Date: Tue, 20 Nov 2018 14:01:08 -0500
Subject: [Dxbase] Missing QSO's after ADIF export
Message-ID: <5c355e$557bt7@fipsb01.cogeco.net>

I have 700 contacts in my log, however when I exported to ADIF, only 672 were in the export ADIF.

Did I miss a setting?  

73
Chris 

Sent from Mail for Windows 10


From fred at g4bwp.com  Tue Nov 20 14:19:17 2018
From: fred at g4bwp.com (Fred)
Date: Tue, 20 Nov 2018 22:19:17 +0300
Subject: [Dxbase] Missing QSO's after ADIF export
In-Reply-To: <5c355e$557bt7@fipsb01.cogeco.net>
Message-ID: <mailman.200.1542741689.2966.dxbase@mailman.qth.net>

Check the operator call against the missing QSOs?73 FredG4BWPSent from my Samsung Galaxy smartphone.
-------- Original message --------From: Chris Pitre VE3ZO <ve3ctp at cogeco.ca> Date: 20/11/2018  22:01  (GMT+03:00) To: dxbase at mailman.qth.net Subject: [Dxbase] Missing QSO's after ADIF export I have 700 contacts in my log, however when I exported to ADIF, only 672 were in the export ADIF.Did I miss a setting?? 73Chris Sent from Mail for Windows 10______________________________________________________________Dxbase mailing listHome: http://mailman.qth.net/mailman/listinfo/dxbaseHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Dxbase at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html

From kb1fj at comcast.net  Mon Nov 26 08:42:42 2018
From: kb1fj at comcast.net (kb1fj Akins)
Date: Mon, 26 Nov 2018 08:42:42 -0500 (EST)
Subject: [Dxbase] Icom 7300
Message-ID: <1355037173.265406.1543239762993@connect.xfinity.com>

Hello everyone.  I haven't been active for some time now.  I have recently purchased the IC7300 and I noticed that this rig is not included in the list at setup.  How do I deal with this problem.  Is there an updated list available?


Thanks,

Ben, KB1FJ

From fred at g4bwp.com  Mon Nov 26 10:08:56 2018
From: fred at g4bwp.com (Fred Handscombe)
Date: Mon, 26 Nov 2018 15:08:56 +0000
Subject: [Dxbase] Icom 7300
In-Reply-To: <1355037173.265406.1543239762993@connect.xfinity.com>
References: <1355037173.265406.1543239762993@connect.xfinity.com>
Message-ID: <c20f9bec-1cde-5c5f-470d-6e7cfb1a4e3b@g4bwp.com>

Ben

There is a file called "Radios.ini" in your DXBase directory

First find that file and make a copy and keep it safe!!

Cut and past the below on to the bottom of that file and 
"Icom_IC-7300_SPLITOK" will appear as a radio option

73 Fred
G4BWP
fred at g4bwp.com

www.g4bwp.com
Hoarder of fine valved amateur radios

[ICOM_IC-7300_SPLITOK]

P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=7

LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=7
HIGH=1
MEDIUM=2
LOW=2
Address=0x94

PACING=5
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0

DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=7

SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(00) hex(fd)
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)

SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(01) hex(fd)
eoc(100)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)
eoc(100)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)

SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd) eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)

SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter") hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter") hex(fd) eoc(0)

SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd) eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(fd) rrs(13) eoc(100)
PrsSplit= hex(%dummy, 11) hex(%split) hex(%dummy) eoc(0)

On 26/11/2018 13:42, kb1fj Akins wrote:
> Hello everyone.  I haven't been active for some time now.  I have recently purchased the IC7300 and I noticed that this rig is not included in the list at setup.  How do I deal with this problem.  Is there an updated list available?
>
>
> Thanks,
>
> Ben, KB1FJ
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


From w2cg at comcast.net  Thu Nov 29 10:16:28 2018
From: w2cg at comcast.net (MARTIN GROZINSKI)
Date: Thu, 29 Nov 2018 10:16:28 -0500 (EST)
Subject: [Dxbase] Initialize Table incomplete trouble
Message-ID: <783055943.169425.1543504589258@connect.xfinity.com>

I have a question on using the "Initialize Table" when I run it only looks at part of my log database. How do I get it to look at all records in the database?  I've tried to "repair" and "compact" the database using the utility program.


Marty/W2CG



From wa6axe at hotmail.com  Thu Nov 29 10:47:40 2018
From: wa6axe at hotmail.com (Joe WA6AXE)
Date: Thu, 29 Nov 2018 15:47:40 +0000
Subject: [Dxbase] Initialize Table incomplete trouble
In-Reply-To: <783055943.169425.1543504589258@connect.xfinity.com>
References: <783055943.169425.1543504589258@connect.xfinity.com>
Message-ID: <SN6PR08MB500511777970992801D8451493D20@SN6PR08MB5005.namprd08.prod.outlook.com>

Marty,

It sounds like you do not have a REG file for all of the callsigns you
have in the OPRCALL column??

Neal made the reg file generator available to everyone - so, you
can make a new reg file if the above scenario is correct!

73 Joe wa6axe
________________________________
From: dxbase-bounces at mailman.qth.net <dxbase-bounces at mailman.qth.net> on behalf of MARTIN GROZINSKI <w2cg at comcast.net>
Sent: Thursday, November 29, 2018 9:16 AM
To: Dxbase at mailman.qth.net
Subject: [Dxbase] Initialize Table incomplete trouble

I have a question on using the "Initialize Table" when I run it only looks at part of my log database. How do I get it to look at all records in the database?  I've tried to "repair" and "compact" the database using the utility program.


Marty/W2CG


______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

From w2cg at comcast.net  Thu Nov 29 13:34:10 2018
From: w2cg at comcast.net (MARTIN)
Date: Thu, 29 Nov 2018 18:34:10 -0000
Subject: [Dxbase] Initialize Table incomplete trouble
Message-ID: <128580891.1.1543516444350@localhost>