[Dxbase] No digital QSOs show in Summary window

[Walter Miller, AJ6T]

Joe,

As usual, you are the go-to guy on this DXBase reflector.  After 
following your instructions I was able to restore the display of digital 
QSOs in the Summary window.  Part of the magic seemed to be using the 
Restore Hidden Rows while I was trying to resize the rows in that 
window.  I always find it difficult to resize and relocate my DXBase 
windows, but all is in order now.  Thanks very much again for your help.

73, Walt, AJ6T

PS: Richard, thank you as well for your response for my plea for help.  
I did take a look at my Band Plan Map, and I noted that several bands 
don't have the digital segments carved out properly.  However, I did not 
change anything in that mapping, so I don't think that was related to my 
display problem.  My setup usually has DXBase read the mode and 
frequency from my K3, and most of my digital QSOs are recorded first in 
WSJT-X and I upload them into DXBase via ADIF transfer.  Everything 
seems fine using that process.


On 3/27/2018 11:55 AM, Joseph Glockner wrote:
> Walt,
>
> It sounds like your DIGITAL ROW is TOO SMALL ..  You can
> do the following to RESET the Summary Window and then
> thereafter you can RESIZE all of the ROWS..
>
> CLOSE DXbase2007..
>
> Go into the DXbase2007 Main Directory and
> DELETE the following files..
>
> SVIEWHF.HGT
> and
> SVIEWHF.WID
>
> Now - OPEN DXbase2007 - you will see an error pop-up window.
> SKIP PAST that ..
>
> CLOSE DXbase2007 again ..
>
> OPEN DXbase2007 and this time the SUMMARY Window will be
> Reset -- RESIZE the ROW and the Columns..
>
> 73 JOe wa6axe
>
>
> Joseph Glockner
> wa6axe at verizon.net
>
>
> -----Original Message-----
> From: Walter Miller, AJ6T <aj6t at comcast.net>
> To: Dxbase <Dxbase at mailman.qth.net>
> Sent: Tue, Mar 27, 2018 11:41 am
> Subject: [Dxbase] No digital QSOs show in Summary window
>
> Although there are many digital QSOs in my log, none of them show up 
> in the DXBase Summary window.  Evidently I have some configuration 
> parameter incorrectly set, but I can't find whatever needs to be 
> changed.  One hint is that Digital line in the Summary window is 
> completely blank, without any asterisks.  Most of my digital contacts 
> are FT8. The few RTTY QSOs in my log do show correctly in the Summary 
> window.   The digital QSOs are properly accounted for in the HF 
> Numeric Statistics.  What DXBase setup parameter do I need to change? 
> 73, Walt, AJ6T 
> ______________________________________________________________ Dxbase 
> mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase 
> Help: http://mailman.qth.net/mmfaq.htm Post: 
> mailto:Dxbase at mailman.qth.net <mailto:Dxbase at mailman.qth.net?> This 
> list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html