From gyates at dreamscape.com Tue Jun 5 16:01:19 2018 From: gyates at dreamscape.com (gyates at dreamscape.com) Date: Tue, 5 Jun 2018 16:01:19 -0400 Subject: [Dxbase] 6M Spots Message-ID: <000001d3fd07$fc2dba50$f4892ef0$@dreamscape.com> I am receiving 6M spots but I don't want 6M spots and I have 6M rejected in setup alerts but I keep getting them now. Any thoughts? Thanks, Greg, WB2BIN From rharris283 at aol.com Tue Jun 5 16:11:47 2018 From: rharris283 at aol.com (rharris283 at aol.com) Date: Tue, 5 Jun 2018 16:11:47 -0400 Subject: [Dxbase] QRZ lookups Message-ID: <163d193ac92-c94-a18e@webjas-vab155.srv.aolmail.net> I know a few years back QRZ stopped updating the call listing I used to use for DXBase. It would automatically populate the info into the log. Is there a way to link the html from QRZ to DXBase any more? I am probably missing something simple but cannot seem to get the 2 working together. Bob WB2UBW From cw_de_n5op at sbcglobal.net Sun Jun 10 21:18:35 2018 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Sun, 10 Jun 2018 20:18:35 -0500 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 Message-ID: I have (so far) successfully upgraded my Win7 32 bit system to Win7 64.? I have the 64 bit DXBase 2007 registration file and have successfully applied it; I've moved current copies refdata.mdb and N5OP.mdb into the installation directory. But, when I open DXBase, I don't see *my* log: instead I see the initial dummy log containing only one entry for AA4LU.? I'm *this* close... What am I doing wrong? 73, Kim N5OP -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) /"In theory there is no difference between theory and practice. But, in practice, there is." //? Attributed to many people; it?s so true that it doesn?t matter who said it./ From nealk3nc at gmail.com Sun Jun 10 21:27:27 2018 From: nealk3nc at gmail.com (Neal Campbell) Date: Sun, 10 Jun 2018 21:27:27 -0400 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: Message-ID: Kim Is it showing that you are registered? When it comes to opening the program, does it offer you the chance to open a database? Neal K3NC On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore wrote: > I have (so far) successfully upgraded my Win7 32 bit system to Win7 64. > I have the 64 bit DXBase 2007 registration file and have successfully > applied it; I've moved current copies refdata.mdb and N5OP.mdb into the > installation directory. But, when I open DXBase, I don't see *my* log: > instead I see the initial dummy log containing only one entry for > AA4LU. I'm *this* close... > > What am I doing wrong? > > 73, > > Kim N5OP > > -- > > Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP > SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) > > /"In theory there is no difference between theory and practice. But, in > practice, there is." //? Attributed to many people; it?s so true that it > doesn?t matter who said it./ > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From cw_de_n5op at sbcglobal.net Sun Jun 10 22:22:43 2018 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Sun, 10 Jun 2018 21:22:43 -0500 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: Message-ID: The splash screen shows "Registered: Kimberly Elmore N5OP," but it doesn't offer me a chance to open a database. I never disabled that -- how do I enable it? 73, Kim N5OP On 6/10/2018 8:27 PM, Neal Campbell wrote: > Kim > > Is it showing that you are registered? When it comes to opening the > program, does it offer you the chance to open a database? > > Neal > K3NC > > > > On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore > wrote: > > I have (so far) successfully upgraded my Win7 32 bit system to > Win7 64. > I have the 64 bit DXBase 2007 registration file and have successfully > applied it; I've moved current copies refdata.mdb and N5OP.mdb > into the > installation directory. But, when I open DXBase, I don't see *my* > log: > instead I see the initial dummy log containing only one entry for > AA4LU.? I'm *this* close... > > What am I doing wrong? > > 73, > > Kim N5OP > > -- > > Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, > CCM, PP > SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) > > /"In theory there is no difference between theory and practice. > But, in > practice, there is." //? Attributed to many people; it?s so true > that it > doesn?t matter who said it./ > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) /"In theory there is no difference between theory and practice. But, in practice, there is." //? Attributed to many people; it?s so true that it doesn?t matter who said it./ From cw_de_n5op at sbcglobal.net Sun Jun 10 22:24:48 2018 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Sun, 10 Jun 2018 21:24:48 -0500 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: Message-ID: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> But... I do remember entering my name with my middle initial. Is the registration file hashed to my exact registration name? If so, I've screwed that up... 73, Kim N5OP On 6/10/2018 8:27 PM, Neal Campbell wrote: > Kim > > Is it showing that you are registered? When it comes to opening the > program, does it offer you the chance to open a database? > > Neal > K3NC > > > > On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore > wrote: > > I have (so far) successfully upgraded my Win7 32 bit system to > Win7 64. > I have the 64 bit DXBase 2007 registration file and have successfully > applied it; I've moved current copies refdata.mdb and N5OP.mdb > into the > installation directory. But, when I open DXBase, I don't see *my* > log: > instead I see the initial dummy log containing only one entry for > AA4LU.? I'm *this* close... > > What am I doing wrong? > > 73, > > Kim N5OP > > -- > > Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, > CCM, PP > SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) > > /"In theory there is no difference between theory and practice. > But, in > practice, there is." //? Attributed to many people; it?s so true > that it > doesn?t matter who said it./ > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) /"In theory there is no difference between theory and practice. But, in practice, there is." //? Attributed to many people; it?s so true that it doesn?t matter who said it./ From nealk3nc at gmail.com Sun Jun 10 22:43:19 2018 From: nealk3nc at gmail.com (Neal Campbell) Date: Sun, 10 Jun 2018 22:43:19 -0400 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> References: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> Message-ID: Try going to the Windows firectory and deleting the dxb2007.ini file and running it again. You will probably have to enter your name and call again. Do not import any old ini files if it gives you the option. Neal K3NC On Sun, Jun 10, 2018 at 10:25 PM Kim Elmore wrote: > But... I do remember entering my name with my middle initial. Is the > registration file hashed to my exact registration name? If so, I've screwed > that up... > > 73, > > Kim N5OP > > On 6/10/2018 8:27 PM, Neal Campbell wrote: > > Kim > > Is it showing that you are registered? When it comes to opening the > program, does it offer you the chance to open a database? > > Neal > K3NC > > > > On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore > wrote: > >> I have (so far) successfully upgraded my Win7 32 bit system to Win7 64. >> I have the 64 bit DXBase 2007 registration file and have successfully >> applied it; I've moved current copies refdata.mdb and N5OP.mdb into the >> installation directory. But, when I open DXBase, I don't see *my* log: >> instead I see the initial dummy log containing only one entry for >> AA4LU. I'm *this* close... >> >> What am I doing wrong? >> >> 73, >> >> Kim N5OP >> >> -- >> >> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP >> SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >> >> /"In theory there is no difference between theory and practice. But, in >> practice, there is." //? Attributed to many people; it?s so true that it >> doesn?t matter who said it./ >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > > -- > > Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP > SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) > > *"In theory there is no difference between theory and practice. But, in > practice, there is." **? Attributed to many people; it?s so true that it > doesn?t matter who said it.* > > > From cw_de_n5op at sbcglobal.net Sun Jun 10 23:17:31 2018 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Sun, 10 Jun 2018 22:17:31 -0500 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> Message-ID: That didn't do it, though I now get asked which database I want to open. I give it the proper one, but I still get the dummy database with only one entry for AA4LU. &3, Kim N5OP On 6/10/2018 9:43 PM, Neal Campbell wrote: > Try going to the Windows firectory and deleting the dxb2007.ini file > and running it again. You will probably have to enter your name and > call again. Do not import any old ini files if it gives you the option. > > Neal > K3NC > > > > On Sun, Jun 10, 2018 at 10:25 PM Kim Elmore > wrote: > > But... I do remember entering my name with my middle initial. Is > the registration file hashed to my exact registration name? If so, > I've screwed that up... > > 73, > > Kim N5OP > > > On 6/10/2018 8:27 PM, Neal Campbell wrote: >> Kim >> >> Is it showing that you are registered? When it comes to opening >> the program, does it offer you the chance to open a database? >> >> Neal >> K3NC >> >> >> >> On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore >> > wrote: >> >> I have (so far) successfully upgraded my Win7 32 bit system >> to Win7 64. >> I have the 64 bit DXBase 2007 registration file and have >> successfully >> applied it; I've moved current copies refdata.mdb and >> N5OP.mdb into the >> installation directory. But, when I open DXBase, I don't see >> *my* log: >> instead I see the initial dummy log containing only one entry >> for >> AA4LU.? I'm *this* close... >> >> What am I doing wrong? >> >> 73, >> >> Kim N5OP >> >> -- >> >> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of >> Meteorology, CCM, PP >> SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >> >> /"In theory there is no difference between theory and >> practice. But, in >> practice, there is." //? Attributed to many people; it?s so >> true that it >> doesn?t matter who said it./ >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: >> http://www.qsl.net/donate.html >> > > -- > > Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, > CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) > > /"In theory there is no difference between theory and practice. > But, in practice, there is." //? Attributed to many people; it?s > so true that it doesn?t matter who said it./ > -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) /"In theory there is no difference between theory and practice. But, in practice, there is." //? Attributed to many people; it?s so true that it doesn?t matter who said it./ From nealk3nc at gmail.com Mon Jun 11 07:25:12 2018 From: nealk3nc at gmail.com (Neal Campbell) Date: Mon, 11 Jun 2018 07:25:12 -0400 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> Message-ID: Kim Copy your old log in your documents folder instead of in the program directory and when DXB starts up, try to open it there. I think you are a victim of file system virtualization! Neal K3NC On Sun, Jun 10, 2018 at 11:17 PM Kim Elmore wrote: > That didn't do it, though I now get asked which database I want to open. I > give it the proper one, but I still get the dummy database with only one > entry for AA4LU. > > &3, > > Kim N5OP > > On 6/10/2018 9:43 PM, Neal Campbell wrote: > > Try going to the Windows firectory and deleting the dxb2007.ini file and > running it again. You will probably have to enter your name and call again. > Do not import any old ini files if it gives you the option. > > Neal > K3NC > > > > On Sun, Jun 10, 2018 at 10:25 PM Kim Elmore > wrote: > >> But... I do remember entering my name with my middle initial. Is the >> registration file hashed to my exact registration name? If so, I've screwed >> that up... >> >> 73, >> >> Kim N5OP >> >> On 6/10/2018 8:27 PM, Neal Campbell wrote: >> >> Kim >> >> Is it showing that you are registered? When it comes to opening the >> program, does it offer you the chance to open a database? >> >> Neal >> K3NC >> >> >> >> On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore >> wrote: >> >>> I have (so far) successfully upgraded my Win7 32 bit system to Win7 64. >>> I have the 64 bit DXBase 2007 registration file and have successfully >>> applied it; I've moved current copies refdata.mdb and N5OP.mdb into the >>> installation directory. But, when I open DXBase, I don't see *my* log: >>> instead I see the initial dummy log containing only one entry for >>> AA4LU. I'm *this* close... >>> >>> What am I doing wrong? >>> >>> 73, >>> >>> Kim N5OP >>> >>> -- >>> >>> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP >>> SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >>> >>> /"In theory there is no difference between theory and practice. But, in >>> practice, there is." //? Attributed to many people; it?s so true that it >>> doesn?t matter who said it./ >>> >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Dxbase at mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> >> >> -- >> >> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP >> SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >> >> *"In theory there is no difference between theory and practice. But, in >> practice, there is." **? Attributed to many people; it?s so true that it >> doesn?t matter who said it.* >> >> >> > > -- > > Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP > SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) > > *"In theory there is no difference between theory and practice. But, in > practice, there is." **? Attributed to many people; it?s so true that it > doesn?t matter who said it.* > > > From cw_de_n5op at sbcglobal.net Mon Jun 11 08:38:19 2018 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Mon, 11 Jun 2018 07:38:19 -0500 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> Message-ID: Also, in my system, I install programs in a different partition: D:/Program Files/DXBase2007; I never accept default installation locations. What I have is an in-place upgrade from Win7 32 to Win7 64 using Laplink?s PC Mover, if that helps. It?s gone swimmingly in the past, even with DXBase. 73, Kim N5OP "People that make music together cannot be enemies, at least as long as the music lasts." -- Paul Hindemith > On Jun 11, 2018, at 06:25, Neal Campbell wrote: > > Kim > > Copy your old log in your documents folder instead of in the program directory and when DXB starts up, try to open it there. I think you are a victim of file system virtualization! > > > Neal > K3NC > > > >> On Sun, Jun 10, 2018 at 11:17 PM Kim Elmore wrote: >> That didn't do it, though I now get asked which database I want to open. I give it the proper one, but I still get the dummy database with only one entry for AA4LU. >> &3, >> >> Kim N5OP >> >>> On 6/10/2018 9:43 PM, Neal Campbell wrote: >>> Try going to the Windows firectory and deleting the dxb2007.ini file and running it again. You will probably have to enter your name and call again. Do not import any old ini files if it gives you the option. >>> >>> Neal >>> K3NC >>> >>> >>> >>>> On Sun, Jun 10, 2018 at 10:25 PM Kim Elmore wrote: >>>> But... I do remember entering my name with my middle initial. Is the registration file hashed to my exact registration name? If so, I've screwed that up... >>>> >>>> 73, >>>> >>>> Kim N5OP >>>> >>>>> On 6/10/2018 8:27 PM, Neal Campbell wrote: >>>>> Kim >>>>> >>>>> Is it showing that you are registered? When it comes to opening the program, does it offer you the chance to open a database? >>>>> >>>>> Neal >>>>> K3NC >>>>> >>>>> >>>>> >>>>>> On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore wrote: >>>>>> I have (so far) successfully upgraded my Win7 32 bit system to Win7 64. >>>>>> I have the 64 bit DXBase 2007 registration file and have successfully >>>>>> applied it; I've moved current copies refdata.mdb and N5OP.mdb into the >>>>>> installation directory. But, when I open DXBase, I don't see *my* log: >>>>>> instead I see the initial dummy log containing only one entry for >>>>>> AA4LU. I'm *this* close... >>>>>> >>>>>> What am I doing wrong? >>>>>> >>>>>> 73, >>>>>> >>>>>> Kim N5OP >>>>>> >>>>>> -- >>>>>> >>>>>> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP >>>>>> SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >>>>>> >>>>>> /"In theory there is no difference between theory and practice. But, in >>>>>> practice, there is." //? Attributed to many people; it?s so true that it >>>>>> doesn?t matter who said it./ >>>>>> >>>>>> ______________________________________________________________ >>>>>> Dxbase mailing list >>>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>>> Post: mailto:Dxbase at mailman.qth.net >>>>>> >>>>>> This list hosted by: http://www.qsl.net >>>>>> Please help support this email list: http://www.qsl.net/donate.html >>>> >>>> -- >>>> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >>>> >>>> "In theory there is no difference between theory and practice. But, in practice, there is." ? Attributed to many people; it?s so true that it doesn?t matter who said it. >>>> >>>> >>>> >> >> -- >> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >> >> "In theory there is no difference between theory and practice. But, in practice, there is." ? Attributed to many people; it?s so true that it doesn?t matter who said it. >> >> From n7ws at k6mhe.com Mon Jun 11 09:09:33 2018 From: n7ws at k6mhe.com (Wes N7WS) Date: Mon, 11 Jun 2018 06:09:33 -0700 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: Message-ID: Tools -> Options -> General -> Check Prompts at Startup Database and Field Order -> OK.? Close and reopen DXbase, chose the location of your log database. On 6/10/2018 6:18 PM, Kim Elmore wrote: > I have (so far) successfully upgraded my Win7 32 bit system to Win7 64.? I > have the 64 bit DXBase 2007 registration file and have successfully applied > it; I've moved current copies refdata.mdb and N5OP.mdb into the installation > directory. But, when I open DXBase, I don't see *my* log: instead I see the > initial dummy log containing only one entry for AA4LU.? I'm *this* close... > > What am I doing wrong? > > 73, > > Kim N5OP From cw_de_n5op at sbcglobal.net Mon Jun 11 09:44:32 2018 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Mon, 11 Jun 2018 08:44:32 -0500 Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> Message-ID: <3C431DB8-AC25-41F2-B6E2-B9F469BD9D85@sbcglobal.net> I copied it into the documents folder and... Nope, no luck. Exactly the same results. 73, Kim N5OP "People that make music together cannot be enemies, at least as long as the music lasts." -- Paul Hindemith > On Jun 11, 2018, at 06:25, Neal Campbell wrote: > > Kim > > Copy your old log in your documents folder instead of in the program directory and when DXB starts up, try to open it there. I think you are a victim of file system virtualization! > > > Neal > K3NC > > > >> On Sun, Jun 10, 2018 at 11:17 PM Kim Elmore wrote: >> That didn't do it, though I now get asked which database I want to open. I give it the proper one, but I still get the dummy database with only one entry for AA4LU. >> &3, >> >> Kim N5OP >> >>> On 6/10/2018 9:43 PM, Neal Campbell wrote: >>> Try going to the Windows firectory and deleting the dxb2007.ini file and running it again. You will probably have to enter your name and call again. Do not import any old ini files if it gives you the option. >>> >>> Neal >>> K3NC >>> >>> >>> >>>> On Sun, Jun 10, 2018 at 10:25 PM Kim Elmore wrote: >>>> But... I do remember entering my name with my middle initial. Is the registration file hashed to my exact registration name? If so, I've screwed that up... >>>> >>>> 73, >>>> >>>> Kim N5OP >>>> >>>>> On 6/10/2018 8:27 PM, Neal Campbell wrote: >>>>> Kim >>>>> >>>>> Is it showing that you are registered? When it comes to opening the program, does it offer you the chance to open a database? >>>>> >>>>> Neal >>>>> K3NC >>>>> >>>>> >>>>> >>>>>> On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore wrote: >>>>>> I have (so far) successfully upgraded my Win7 32 bit system to Win7 64. >>>>>> I have the 64 bit DXBase 2007 registration file and have successfully >>>>>> applied it; I've moved current copies refdata.mdb and N5OP.mdb into the >>>>>> installation directory. But, when I open DXBase, I don't see *my* log: >>>>>> instead I see the initial dummy log containing only one entry for >>>>>> AA4LU. I'm *this* close... >>>>>> >>>>>> What am I doing wrong? >>>>>> >>>>>> 73, >>>>>> >>>>>> Kim N5OP >>>>>> >>>>>> -- >>>>>> >>>>>> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP >>>>>> SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >>>>>> >>>>>> /"In theory there is no difference between theory and practice. But, in >>>>>> practice, there is." //? Attributed to many people; it?s so true that it >>>>>> doesn?t matter who said it./ >>>>>> >>>>>> ______________________________________________________________ >>>>>> Dxbase mailing list >>>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>>> Post: mailto:Dxbase at mailman.qth.net >>>>>> >>>>>> This list hosted by: http://www.qsl.net >>>>>> Please help support this email list: http://www.qsl.net/donate.html >>>> >>>> -- >>>> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >>>> >>>> "In theory there is no difference between theory and practice. But, in practice, there is." ? Attributed to many people; it?s so true that it doesn?t matter who said it. >>>> >>>> >>>> >> >> -- >> Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) >> >> "In theory there is no difference between theory and practice. But, in practice, there is." ? Attributed to many people; it?s so true that it doesn?t matter who said it. >> >> From cw_de_n5op at sbcglobal.net Mon Jun 11 11:16:08 2018 From: cw_de_n5op at sbcglobal.net (Kimberly Elmore) Date: Mon, 11 Jun 2018 15:16:08 +0000 (UTC) Subject: [Dxbase] Moving DXBase form Win7 32 to Win7 64 In-Reply-To: References: <88b6f662-2ba3-2b86-8f38-d6bf1dfb954b@sbcglobal.net> Message-ID: <323557586.3585857.1528730168739@mail.yahoo.com> Hi Neal, This may be a legitimate case where I should uninstall DXBase adn then reinstall it. I tried that very thing and fund thatthe required files for uninstalling DXBase were corrupted during my in-place upgrade form Win7 32 to Win7 64. How do I go about *manually* uninstalling all remnants of DXBase so that I can do a fresh reinstallation? I have no qualms about using regedit as long as I know exactly what I need to do with it.? 73, Kim N5OP From: Neal Campbell To: Kim Elmore Cc: DXBase List Sent: Monday, June 11, 2018 6:25 AM Subject: Re: [Dxbase] Moving DXBase form Win7 32 to Win7 64 Kim Copy your old log in your documents folder instead of in the program directory and when DXB starts up, try to open it there. I think you are a victim of file system virtualization! NealK3NC On Sun, Jun 10, 2018 at 11:17 PM Kim Elmore wrote: That didn't do it, though I now get asked which database I want to open. I give it the proper one, but I still get the dummy database with only one entry for AA4LU. &3, Kim N5OP On 6/10/2018 9:43 PM, Neal Campbell wrote: Try going to the Windows firectory and deleting the dxb2007.ini file and running it again. You will probably have to enter your name and call again. Do not import any old ini files if it gives you the option. Neal K3NC On Sun, Jun 10, 2018 at 10:25 PM Kim Elmore wrote: But... I do remember entering my name with my middle initial. Is the registration file hashed to my exact registration name? If so, I've screwed that up... 73, Kim N5OP On 6/10/2018 8:27 PM, Neal Campbell wrote: Kim Is it showing that you are registered? When it comes to opening the program, does it offer you the chance to open a database? Neal K3NC On Sun, Jun 10, 2018 at 9:18 PM Kim Elmore wrote: I have (so far) successfully upgraded my Win7 32 bit system to Win7 64.? I have the 64 bit DXBase 2007 registration file and have successfully applied it; I've moved current copies refdata.mdb and N5OP.mdb into the installation directory. But, when I open DXBase, I don't see *my* log: instead I see the initial dummy log containing only one entry for AA4LU.? I'm *this* close... What am I doing wrong? 73, Kim N5OP -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) /"In theory there is no difference between theory and practice. But, in practice, there is." //? Attributed to many people; it?s so true that it doesn?t matter who said it./ ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) "In theory there is no difference between theory and practice. But, in practice, there is." ? Attributed to many people; it?s so true that it doesn?t matter who said it. ? -- Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP SEL/MEL/Glider, N5OP, 2nd Class Radiotelegraph, GROL) "In theory there is no difference between theory and practice. But, in practice, there is." ? Attributed to many people; it?s so true that it doesn?t matter who said it. ? From knut.meland at getmail.no Fri Jun 15 08:00:53 2018 From: knut.meland at getmail.no (Knut Meland) Date: Fri, 15 Jun 2018 14:00:53 +0200 Subject: [Dxbase] My log looks empty - but it isn't Message-ID: <886c36f0-8db6-f6bb-42b6-0e5b20ee02ec@getmail.no> This morning my DXbase log looked quite empty on my laptop. Worked ok yesterday, but now just the column headings and nothing else. Tried various log files. All empty. Tried View Previous. Could see content there, but nothing in the log view. Tried also to load the file on my desktop. Worked ok. So what is the solution? Guess there is a corrupted setup file somewhere. Hope someone can help. 73 de LA9RY Knut From knut.meland at getmail.no Fri Jun 15 09:11:45 2018 From: knut.meland at getmail.no (Knut Meland) Date: Fri, 15 Jun 2018 15:11:45 +0200 Subject: [Dxbase] My log looks empty - but it isn't In-Reply-To: <886c36f0-8db6-f6bb-42b6-0e5b20ee02ec@getmail.no> References: <886c36f0-8db6-f6bb-42b6-0e5b20ee02ec@getmail.no> Message-ID: <872c30cd-1d08-9fb3-19b7-dd89e1d825b0@getmail.no> Problem solved. Columns had piled up. Just had to unhide all. 73 de Knut LA9RY Den 15.06.2018 14:00, skrev Knut Meland: > This morning my DXbase log looked quite empty on my laptop. Worked ok > yesterday, but now just the column headings and nothing else. Tried > various log files. All empty. > > Tried View Previous. Could see content there, but nothing in the log > view. > > Tried also to load the file on my desktop. Worked ok. > > So what is the solution? Guess there is a corrupted setup file somewhere. > > Hope someone can help. > > 73 de LA9RY Knut > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Sun Jun 24 10:46:38 2018 From: crownhaven at bellsouth.net (Crownhaven) Date: Sun, 24 Jun 2018 09:46:38 -0500 Subject: [Dxbase] FT8 Logging Message-ID: Posting on both reflectors.? Not sure which one most everyone is using these days.? I have a virgin copy of DXB 2007 running.? By virgin, I mean no add-on software, mods, etc.? If I load an FT8 ADI file into the DXB database, what mode will show up, if anyone has tried this?? And I know about some add-on programs that facilitate all kinds of things with DXB but my question is specific to an unmodified version. 73, Steve, N4JQQ From florafauna at inet.hr Fri Jun 29 14:27:11 2018 From: florafauna at inet.hr (9AFF Project) Date: Fri, 29 Jun 2018 20:27:11 +0200 Subject: [Dxbase] DXBase2002 and 2007 Message-ID: <00ca01d40fd6$cbd48eb0$637dac10$@hr> Hello, Do I need uninstal DXB2002 before instal DXB2007? May I keep both on same PC? Tnx Emir, 9A6AA From wa6axe at verizon.net Fri Jun 29 14:31:22 2018 From: wa6axe at verizon.net (Joseph Glockner) Date: Fri, 29 Jun 2018 14:31:22 -0400 Subject: [Dxbase] DXBase2002 and 2007 In-Reply-To: <00ca01d40fd6$cbd48eb0$637dac10$@hr> References: <00ca01d40fd6$cbd48eb0$637dac10$@hr> Message-ID: <1644cd05e44-c94-caf3@webjas-vac152.srv.aolmail.net> Emir, You CAN keep DXbase2002 and DXbase2007 on the same computer.. 73 Joe wa6axe Joseph Glockner wa6axe at verizon.net -----Original Message----- From: 9AFF Project To: dxbase Sent: Fri, Jun 29, 2018 1:27 pm Subject: Re: [Dxbase] DXBase2002 and 2007 Hello, Do I need uninstal DXB2002 before instal DXB2007? May I keep both on same PC? Tnx Emir, 9A6AA ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From florafauna at inet.hr Fri Jun 29 15:07:48 2018 From: florafauna at inet.hr (9AFF Project) Date: Fri, 29 Jun 2018 21:07:48 +0200 Subject: [Dxbase] DXBase2002 and 2007 In-Reply-To: <1644cd05e44-c94-caf3@webjas-vac152.srv.aolmail.net> References: <00ca01d40fd6$cbd48eb0$637dac10$@hr> <1644cd05e44-c94-caf3@webjas-vac152.srv.aolmail.net> Message-ID: <00d201d40fdc$78dfc660$6a9f5320$@hr> Good news Joe. But... I thought DXB2002 made problem regarding installation of DXB2007. After 16 years, as DXB2002 user I decided jump into DXB2007 (WIN 10). Unfortunately, after I open reg file and downloaded (and install DXB2007), my happiness lasted only 5 seconds. I saw pop-up message: "DXbase has detected that it was not previously shoot down properly. Please initialize tables to insure statistics are accurate." Problem is, when I close that message - DXBase shoot down immediately. I uninstall DXB2007, install again - same story. Any suggestion, please? Emir, 9A6AA -----Original Message----- From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Joseph Glockner Sent: Friday, June 29, 2018 8:31 PM To: florafauna at inet.hr; dxbase at mailman.qth.net Subject: Re: [Dxbase] DXBase2002 and 2007 Emir, You CAN keep DXbase2002 and DXbase2007 on the same computer.. 73 Joe wa6axe Joseph Glockner wa6axe at verizon.net -----Original Message----- From: 9AFF Project To: dxbase Sent: Fri, Jun 29, 2018 1:27 pm Subject: Re: [Dxbase] DXBase2002 and 2007 Hello, Do I need uninstal DXB2002 before instal DXB2007? May I keep both on same PC? Tnx Emir, 9A6AA ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html