From wa6axe at verizon.net Fri Jul 13 11:00:53 2018 From: wa6axe at verizon.net (Joseph Glockner) Date: Fri, 13 Jul 2018 11:00:53 -0400 Subject: [Dxbase] Heads-up on Operations using the callsign TO6OK (Ambiguous Prefix) Message-ID: <1649428b404-c94-2d05@webjas-vad064.srv.aolmail.net> Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ... // TO6OK // Just saw that the callsign TO6OK (Mayotte (AF-027), FH) is to be active between 20 September and 6 October 2018. This callsign will default to France(F) because of the Alias Map table mapping. This callsign is not currently MAPPED in the CALLMAP table -- so, if you want, simply make a dummy QSO with this callsign and change the PREFIX column of your logbook mdb file to FH and then when the pop-up asks you if you want to save this TO6OK mapped to FH -- say YES/OK ---- Then delete that dummy QSO .. The CALLMAP table will now be updated in advance so that if you work this station -- it will have the correct PREFIX in your logbook QSO window ... 73 Joe WA6AXE Joseph Glockner wa6axe at verizon.net From k4hcp at att.net Sat Jul 14 16:35:48 2018 From: k4hcp at att.net (Cliff Prosser) Date: Sat, 14 Jul 2018 20:35:48 +0000 (UTC) Subject: [Dxbase] Internet Cluster Host needed. References: <2086778787.4508123.1531600548742.ref@mail.yahoo.com> Message-ID: <2086778787.4508123.1531600548742@mail.yahoo.com> Can someone share a working IP Host for? the internet cluster? I am unable to find any after multiple choices or I may have another problem?73,? ?Cliff Prosser??k4hcp at att.net From k4em at bellsouth.net Sat Jul 14 17:50:48 2018 From: k4em at bellsouth.net (Dave) Date: Sat, 14 Jul 2018 17:50:48 -0400 Subject: [Dxbase] Internet Cluster Host needed. In-Reply-To: <2086778787.4508123.1531600548742@mail.yahoo.com> References: <2086778787.4508123.1531600548742.ref@mail.yahoo.com> <2086778787.4508123.1531600548742@mail.yahoo.com> Message-ID: <001e01d41bbc$ba8e3330$2faa9990$@net> I use 'k3ww' Cliff, it's in the Dxbase IP host box. Dave k4em -----Original Message----- From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Cliff Prosser Sent: Saturday, July 14, 2018 4:36 PM To: Dxbase at mailman.qth.net Subject: [Dxbase] Internet Cluster Host needed. Can someone share a working IP Host for the internet cluster? I am unable to find any after multiple choices or I may have another problem 73, Cliff Prosser k4hcp at att.net ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From n7ws at k6mhe.com Sun Jul 15 14:36:03 2018 From: n7ws at k6mhe.com (Wes N7WS) Date: Sun, 15 Jul 2018 11:36:03 -0700 Subject: [Dxbase] Icom connections Message-ID: After using Elecraft radios for ten years and Kenwood before that (Elecraft copied the Kenwood protocol) reliability issues have me considering a new radio. an Icom 7610.? Has anyone interfaced one of these to DXBase.? I don't see it in the list of Icom radios, but imagine it's similar to others which are.? I'm trying to anticipate the interfacing issues that I might have. Wes? N7WS From wa6axe at verizon.net Sun Jul 15 14:49:21 2018 From: wa6axe at verizon.net (Joseph Glockner) Date: Sun, 15 Jul 2018 14:49:21 -0400 Subject: [Dxbase] Icom connections In-Reply-To: References: Message-ID: <1649f4699af-c91-1cc1@webjas-vac053.srv.aolmail.net> Wes, Looking at the ICOM 7600 commands, etc -- the only thing that I think you would have to change is the ADDRESS Yours would become Address=0x98 This as per the 7610 CAT Commands pdf file .. http://www.icom.co.jp/world/support/download/manual/pdf/IC-7610_ENG_CI-V_0a.pdf Joseph Glockner wa6axe at verizon.net -----Original Message----- From: Wes N7WS To: 'DXBase Reflector' Sent: Sun, Jul 15, 2018 1:36 pm Subject: [Dxbase] Icom connections After using Elecraft radios for ten years and Kenwood before that (Elecraft copied the Kenwood protocol) reliability issues have me considering a new radio. an Icom 7610. Has anyone interfaced one of these to DXBase. I don't see it in the list of Icom radios, but imagine it's similar to others which are. I'm trying to anticipate the interfacing issues that I might have.Wes N7WS______________________________________________________________Dxbase mailing listHome: http://mailman.qth.net/mailman/listinfo/dxbaseHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Dxbase at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html From n7ws at k6mhe.com Sun Jul 15 14:53:08 2018 From: n7ws at k6mhe.com (Wes N7WS) Date: Sun, 15 Jul 2018 11:53:08 -0700 Subject: [Dxbase] Icom connections In-Reply-To: <1649f4699af-c91-1cc1@webjas-vac053.srv.aolmail.net> References: <1649f4699af-c91-1cc1@webjas-vac053.srv.aolmail.net> Message-ID: <9f69f2fb-f6fe-75e6-4b0a-c0d20d256095@k6mhe.com> Thank you Joe for your amazingly quick answer. Wes On 7/15/2018 11:49 AM, Joseph Glockner wrote: > Wes, > > Looking at the ICOM 7600 commands, etc -- the only thing that I think you > would have to change is the ADDRESS > > Yours would become > > Address=0x98 > > This as per the 7610 CAT Commands pdf file .. > > http://www.icom.co.jp/world/support/download/manual/pdf/IC-7610_ENG_CI-V_0a.pdf > > > Joseph Glockner > wa6axe at verizon.net > > > -----Original Message----- > From: Wes N7WS > To: 'DXBase Reflector' > Sent: Sun, Jul 15, 2018 1:36 pm > Subject: [Dxbase] Icom connections > > After using Elecraft radios for ten years and Kenwood before that (Elecraft > copied the Kenwood protocol) reliability issues have me considering a new > radio. an Icom 7610.? Has anyone interfaced one of these to DXBase.? I don't > see it in the list of Icom radios, but imagine it's similar to others which > are. I'm trying to anticipate the interfacing issues that I might have. Wes? > N7WS ______________________________________________________________ Dxbase > mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: > http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From wa6axe at verizon.net Sun Jul 15 15:37:00 2018 From: wa6axe at verizon.net (Joseph Glockner) Date: Sun, 15 Jul 2018 15:37:00 -0400 Subject: [Dxbase] Icom connections In-Reply-To: <9f69f2fb-f6fe-75e6-4b0a-c0d20d256095@k6mhe.com> Message-ID: <1649f723981-c92-c4ee@webjas-vac018.srv.aolmail.net> Wes, In follow-up .. There are currently "Four" IC-7600 Radio.ini file entries.. [ICOM_IC-7600] [ICOM_IC-7600_DW_ok_SPLT_ok] [ICOM_IC-7600_SPLITOK] [ICOM_IC-7600_VFO_A_Only] Since I do not have .. nor have I ever had .. and ICOM rig, I would suggest that you try to find someone out there that has an ICOM 7610 rig ... As far as the Radios.ini file itself .. the only thing that I can find that would have to be changed to MAKE A NEW set of IC-7610 entries from the old IC-7600 entires -- would be to change the line that talks about the ADDRESS (as I stated in my last email) .. Address=0x98 But - you best bet would be to contact an ICOM owner.. Much success!! 73 Joe wa6axe Joseph Glockner wa6axe at verizon.net -----Original Message----- From: Wes N7WS To: Joseph Glockner ; dxbase Sent: Sun, Jul 15, 2018 1:53 pm Subject: Re: [Dxbase] Icom connections Thank you Joe for your amazingly quick answer. Wes On 7/15/2018 11:49 AM, Joseph Glockner wrote: Wes, Looking at the ICOM 7600 commands, etc -- the only thing that I think you would have to change is the ADDRESS Yours would become Address=0x98 This as per the 7610 CAT Commands pdf file .. http://www.icom.co.jp/world/support/download/manual/pdf/IC-7610_ENG_CI-V_0a.pdf Joseph Glockner wa6axe at verizon.net -----Original Message----- From: Wes N7WS To: 'DXBase Reflector' Sent: Sun, Jul 15, 2018 1:36 pm Subject: [Dxbase] Icom connections After using Elecraft radios for ten years and Kenwood before that (Elecraft copied the Kenwood protocol) reliability issues have me considering a new radio. an Icom 7610. Has anyone interfaced one of these to DXBase. I don't see it in the list of Icom radios, but imagine it's similar to others which are. I'm trying to anticipate the interfacing issues that I might have. Wes N7WS ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From n7ws at k6mhe.com Sun Jul 15 16:02:09 2018 From: n7ws at k6mhe.com (Wes N7WS) Date: Sun, 15 Jul 2018 13:02:09 -0700 Subject: [Dxbase] Icom connections In-Reply-To: <1649f723981-c92-c4ee@webjas-vac018.srv.aolmail.net> References: <1649f723981-c92-c4ee@webjas-vac018.srv.aolmail.net> Message-ID: Thanks again, Joe. I actually haven't completely decided on the ICOM.? A looong time ago I owned an IC211 multi-mode.? It was such a POS (they actually had solder bridges between IC pins to make up for missing traces) I gave it to a friend who also had one, so he could keep one running.? I used to say that it was a tribute to his character that even after taking the radio off my hands, we remained friends.? I swore back then I would never own another ICOM.? But times have changed (I hope). Wes On 7/15/2018 12:37 PM, Joseph Glockner wrote: > Wes, > > In follow-up ..?? There are currently "Four" IC-7600 Radio.ini file entries.. > > > [ICOM_IC-7600] > > [ICOM_IC-7600_DW_ok_SPLT_ok] > > [ICOM_IC-7600_SPLITOK] > > [ICOM_IC-7600_VFO_A_Only] > > > Since I do not have .. nor have I ever had .. and ICOM rig, > I would suggest that you try to find someone out there that > has an ICOM 7610? rig ... > > As far as the Radios.ini file itself .. the only thing that I can > find that would have to be changed to MAKE A NEW set > of IC-7610 entries from the old IC-7600 entires -- would be to > change the line that talks about the ADDRESS? (as I stated in my > last email) .. > > > Address=0x98 > > > > But - you best bet would be to contact an ICOM owner.. > > Much success!! > > > 73 Joe wa6axe > > > Joseph Glockner > wa6axe at verizon.net > > > -----Original Message----- > From: Wes N7WS > To: Joseph Glockner ; dxbase > Sent: Sun, Jul 15, 2018 1:53 pm > Subject: Re: [Dxbase] Icom connections > > Thank you Joe for your amazingly quick answer. > > Wes > > On 7/15/2018 11:49 AM, Joseph Glockner wrote: > > Wes, > > Looking at the ICOM 7600 commands, etc -- the only thing that I think you > would have to change is the ADDRESS > > Yours would become > > Address=0x98 > > This as per the 7610 CAT Commands pdf file .. > > http://www.icom.co.jp/world/support/download/manual/pdf/IC-7610_ENG_CI-V_0a.pdf > > > Joseph Glockner > wa6axe at verizon.net > > > -----Original Message----- > From: Wes N7WS > To: 'DXBase Reflector' > > Sent: Sun, Jul 15, 2018 1:36 pm > Subject: [Dxbase] Icom connections > > After using Elecraft radios for ten years and Kenwood before that > (Elecraft copied the Kenwood protocol) reliability issues have me > considering a new radio. an Icom 7610.? Has anyone interfaced one of these > to DXBase.? I don't see it in the list of Icom radios, but imagine it's > similar to others which are.? I'm trying to anticipate the interfacing > issues that I might have. Wes? N7WS > ______________________________________________________________ Dxbase > mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: > http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > From crownhaven at bellsouth.net Wed Jul 18 10:30:11 2018 From: crownhaven at bellsouth.net (Crownhaven) Date: Wed, 18 Jul 2018 09:30:11 -0500 Subject: [Dxbase] MS Access - New Version? Message-ID: I was just updating my MDB and REF.DATA files on my Windows 7 machine.? I got an alert stating that the MS Access program used to create DXBase was no longer in use.? It recommended that I upgrade although it clearly stated I could no longer use the database in the current program (DXB).? Anyone else seen this? Steve, N4JQQ