[Dxbase] Yaesu G-1000DXA interfaces

[Ilya Zozin, 4Z1UF]

I'm using ERC,  but with RS-232 interface, both on Yaesu 1000 and 2800.

⁣73, 
Ilya. 

Using mobile device, 

Sent from BlueMail

​

On Oct 31, 2016, 18:45, at 18:45, "Ron Stordahl, AE5E via Dxbase" <dxbase at mailman.qth.net> wrote:
>There are a number of available interfaces.
>http://www.idiompress.com/
>
>Easy-Rotor-Control e-shop
>EBay: Rotor control for G-1000DXA
>as well as Yaeus's own which appears to me to be tremendously
>overpriced.
>I have an old Idiompress card which has failed.  I have tried to
>contact them to see if it would be practical to repair, but no response
>has been received as yet.
>The ERC-Mini DX from Easy-Rotor-Control has a built in USB interface
>which I believe generates a virtual Com port which should be compatible
>with DXBase.
>Does anyone have any experiences with any of these interfaces with
>DXBase?
>Ron, AE5E
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html