From wa6axe at verizon.net  Fri Oct  7 12:34:04 2016
From: wa6axe at verizon.net (Joseph Glockner)
Date: Fri, 7 Oct 2016 12:34:04 -0400
Subject: [Dxbase] Heads-up on operations using the callsign TX8JOTA
 (ambiguous prefix)
Message-ID: <1579ffe9292-420-11f2@webprd-m52.mail.aol.com>


 Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ...
 
// TX8JOTA //
 
Just saw that the callsign TX8JOTA from New Caledonia,
on October 14 - October 16, 2016. This callsign will default to France(F)
because of the Alias Map table mapping.
 
This callsign is not currently MAPPED in the CALLMAP table -- so, if you want,
simply make a dummy QSO with this callsign and change the PREFIX column
of your logbook mdb file to FK and then when the pop-up asks you if you want
to save this TX8JOTA mapped to FK -- say YES/OK ---- Then delete that dummy QSO ..
 
The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...
 
73 Joe WA6AXE 

 

Joseph Glockner
wa6axe at verizon.net


From wa6axe at verizon.net  Fri Oct 28 13:17:41 2016
From: wa6axe at verizon.net (Joseph Glockner)
Date: Fri, 28 Oct 2016 13:17:41 -0400
Subject: [Dxbase] Heads-up on operations using the callsign TO6ABM
 (ambiguous prefix)
Message-ID: <1580c4c0f5f-5477-bd64@webprd-a23.mail.aol.com>


 Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ...
 
// TO6ABM //
 
Just saw that the callsign TO6ABM from Martinique,
on October 29 - October 30, 2016. This callsign will default to France(F)
because of the Alias Map table mapping.
 
This callsign is not currently MAPPED in the CALLMAP table -- so, if you want,
simply make a dummy QSO with this callsign and change the PREFIX column
of your logbook mdb file to FM and then when the pop-up asks you if you want
to save this TO6ABM mapped to FM -- say YES/OK ---- Then delete that dummy QSO ..
 
The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...
 
73 Joe WA6AXE

 

Joseph Glockner
wa6axe at verizon.net


From ronn5in-dxbase12 at yahoo.com  Mon Oct 31 12:45:47 2016
From: ronn5in-dxbase12 at yahoo.com (Ron Stordahl, AE5E)
Date: Mon, 31 Oct 2016 16:45:47 +0000 (UTC)
Subject: [Dxbase] Yaesu G-1000DXA interfaces
References: <613945499.1160495.1477932347493.ref@mail.yahoo.com>
Message-ID: <613945499.1160495.1477932347493@mail.yahoo.com>

There are a number of available interfaces.
http://www.idiompress.com/

Easy-Rotor-Control e-shop
EBay: Rotor control for G-1000DXA
as well as Yaeus's own which appears to me to be tremendously overpriced.
I have an old Idiompress card which has failed.? I have tried to contact them to see if it would be practical to repair, but no response has been received as yet.
The ERC-Mini DX from Easy-Rotor-Control has a built in USB interface which I believe generates a virtual Com port which should be compatible with DXBase.
Does anyone have any experiences with any of these interfaces with DXBase?
Ron, AE5E

From 4z1uf at bezeqint.net  Mon Oct 31 15:13:27 2016
From: 4z1uf at bezeqint.net (Ilya Zozin, 4Z1UF)
Date: Mon, 31 Oct 2016 21:13:27 +0200
Subject: [Dxbase] Yaesu G-1000DXA interfaces
In-Reply-To: <613945499.1160495.1477932347493@mail.yahoo.com>
References: <613945499.1160495.1477932347493.ref@mail.yahoo.com>
	<613945499.1160495.1477932347493@mail.yahoo.com>
Message-ID: <6b7fea10-988a-40f3-bd47-ebc109509998@typeapp.com>

I'm using ERC,? but with RS-232 interface, both on Yaesu 1000 and 2800.

?73, 
Ilya. 

Using mobile device, 

Sent from BlueMail

?

On Oct 31, 2016, 18:45, at 18:45, "Ron Stordahl, AE5E via Dxbase" <dxbase at mailman.qth.net> wrote:
>There are a number of available interfaces.
>http://www.idiompress.com/
>
>Easy-Rotor-Control e-shop
>EBay: Rotor control for G-1000DXA
>as well as Yaeus's own which appears to me to be tremendously
>overpriced.
>I have an old Idiompress card which has failed.? I have tried to
>contact them to see if it would be practical to repair, but no response
>has been received as yet.
>The ERC-Mini DX from Easy-Rotor-Control has a built in USB interface
>which I believe generates a virtual Com port which should be compatible
>with DXBase.
>Does anyone have any experiences with any of these interfaces with
>DXBase?
>Ron, AE5E
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

From ronn5in-dxbase12 at yahoo.com  Mon Oct 31 22:39:13 2016
From: ronn5in-dxbase12 at yahoo.com (Ron Stordahl, AE5E)
Date: Tue, 1 Nov 2016 02:39:13 +0000 (UTC)
Subject: [Dxbase] Yaesu G-1000DXA interfaces
In-Reply-To: <9f7c2c58-298b-89f1-02a6-b3f04ce19a15@ntelos.net>
References: <613945499.1160495.1477932347493.ref@mail.yahoo.com>
	<613945499.1160495.1477932347493@mail.yahoo.com>
	<9f7c2c58-298b-89f1-02a6-b3f04ce19a15@ntelos.net>
Message-ID: <1453812328.1511257.1477967953208@mail.yahoo.com>

Clark
Ill check at the email address you provided concerning repairs before I try anything else.? 

Thanks, Ron 

    On Monday, October 31, 2016 4:21 PM, Clark L. Stewart <w8tn at ntelos.net> wrote:
 

  Ron,
 
 ???? I have a Rotor-EZ kit which has never been built if you are interested.? The box was shipped to me on May 27, 2003.? The plastic bag of parts has never been opened and it has the full construction manual.? Make me an offer.
 
 ???? But, if you just want to have yours repaired, I found the following on hamsupply.com who purchased the assets of Idiom Press:
 
 
Charley Snodgrass:? Charley provides complete services for CDE/Telex/Hy-Gain rotator control boxes, including repairs and installation of Rotor-EZ boards and Rotator Illuminator LED light kits.? Please contact Charley at:?charley46813 at gmail.com
 
 
 73, Clark, W8TN
 
 
 
 On 10/31/2016 12:45 PM, Ron Stordahl, AE5E via Dxbase wrote:
  
 There are a number of available interfaces.
http://www.idiompress.com/

Easy-Rotor-Control e-shop
EBay: Rotor control for G-1000DXA
as well as Yaeus's own which appears to me to be tremendously overpriced.
I have an old Idiompress card which has failed.? I have tried to contact them to see if it would be practical to repair, but no response has been received as yet.
The ERC-Mini DX from Easy-Rotor-Control has a built in USB interface which I believe generates a virtual Com port which should be compatible with DXBase.
Does anyone have any experiences with any of these interfaces with DXBase?
Ron, AE5E
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


 
 
 

   

