[Dxbase] Oper Call issue

[Fred Handscombe]

Dave

This has been a problem with DXBase "forever", at least since Windows.  
Prior to Windows Jack used another "gag" to "protect" the programme 
(that didn't work very well anyway!)

I have exchanged many robust emails with him on this subject as under UK 
licence conditions "Operator call" is (was?) a quite specific logging 
requirement (if another ham uses your call you MUST record his call in 
your log).  So I asked for a file will all G calls in it!!  That went 
down "well"!!

You will need to do a search and replace to put your call instead of 
your friends then it will export.   The same data "blocks" QSL card 
printing too which you will find out later!

Hopefully Neal will find a new method which doesn't need you to corrupt 
the log data?

73 Fred


On 11/05/2015 03:19, Chasey, David A wrote:
> Scott, N9LJX and I operated in the INQP doing a multi-single operation under my call, N9FN.    We logged with N1MM+ and set the OPER Call correctly for who made which QSO's.     I exported the N1MM log to ADIF and imported my log into DXBase 2007 v1.10 and all is well so far.    I wanted to upload to LoTW from DXBase, so when I used the Selection Wizard to export all QSO's with "No LOTW Submitted" as the only filter checked (yes, I confirmed "Opr. Call" was NOT checked) the export only contained the QSO's I made.     Dave - K9FN and I usually do the multi-singles, but we hadn't tracked which operator made which QSO, all had been set to N9FN.   If this is a case of N9LJX not being an authorized callsign for the program, he is not using DXBase under his call, he just made the QSO's from my station under my call and that was noted appropriately in MY log.
>
> I do different multi-single operations, and for a variety of reasons I'd like to track which operator makes which QSO's in my master log in DXBase.   How can I get DXBase to export the calls Scott made also?      How can I keep this from happening in the future when I have different folks operating with me?
>
> Thanks & 73,
>
> Dave - N9FN
>
>
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>