From wx1s at arrl.net Wed Feb 4 09:16:26 2015 From: wx1s at arrl.net (Fred Coelho) Date: Wed, 4 Feb 2015 09:16:26 -0500 Subject: [Dxbase] DX Info Window, Column Resizing Issue v1.10 Message-ID: <2500C8D0324244A69695F847640802D3@Needlefish> Greetings, I've been hesitant to use v1.10 because my DX info window constantly resizes column width. It appears that the resizing is caused by the dynamic scroll bar which appears when the window fills up. All the other windows have fixed column width, this prevents resizing. Currently I leave space for the scroll bar, but when I resize my main window, I have to resize column width in the DX Info window. Is there a way to lock column width in the DX Info window? Joe, thanks again for the Bridging Tool. Works slick! fred WX1S From dxbase at mailman.qth.net Thu Feb 5 21:57:38 2015 From: dxbase at mailman.qth.net (Steven Schmidt via Dxbase) Date: Fri, 6 Feb 2015 02:57:38 +0000 (UTC) Subject: [Dxbase] Database update... Message-ID: <1598799329.369584.1423191458213.JavaMail.yahoo@mail.yahoo.com> So, I've been off the air for a while through a couple moves, but just got a station up and running again.? Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes.? Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually?? I used to be pretty good with it, but I'm out of practice.? I think my last manual update was Swain's Island... Thanks for any and all help, Steve? K4WA From fredch at homeshack.freeserve.co.uk Sat Feb 7 04:41:45 2015 From: fredch at homeshack.freeserve.co.uk (Fred Handscombe) Date: Sat, 07 Feb 2015 09:41:45 +0000 Subject: [Dxbase] Database update... In-Reply-To: <1598799329.369584.1423191458213.JavaMail.yahoo@mail.yahoo.com> References: <1598799329.369584.1423191458213.JavaMail.yahoo@mail.yahoo.com> Message-ID: <54D5DDD9.2010702@homeshack.freeserve.co.uk> Hi Steven Surprised no-one answered Joe WA6AXE has written an excellent programme to update the main database. Seek it out! 73 Fred G4BWP On 06/02/2015 02:57, Steven Schmidt via Dxbase wrote: > So, I've been off the air for a while through a couple moves, but just got a station up and running again. Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes. Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually? I used to be pretty good with it, but I'm out of practice. I think my last manual update was Swain's Island... > Thanks for any and all help, > Steve K4WA > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From wx1s at arrl.net Sat Feb 7 07:43:01 2015 From: wx1s at arrl.net (Fred Coelho) Date: Sat, 7 Feb 2015 07:43:01 -0500 Subject: [Dxbase] WSJT Signal Report In-Reply-To: References: Message-ID: Joe, I wouldn't mind if the report were 599 and dB report continued to go to the Notes Field. That is of course, if everyone else agrees. Fred WX1S -----Original Message----- From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of dxbase-request at mailman.qth.net Sent: Saturday, February 07, 2015 4:42 AM To: dxbase at mailman.qth.net Subject: Dxbase Digest, Vol 130, Issue 1 Send Dxbase mailing list submissions to dxbase at mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/dxbase or, via email, send a message with subject or body 'help' to dxbase-request at mailman.qth.net You can reach the person managing the list at dxbase-owner at mailman.qth.net When replying, please edit your Subject line so it is more specific than "Re: Contents of Dxbase digest..." Today's Topics: 1. WSJT-X Ver 1.4 Beta (ONLY) to DXbase2007 BRIDGE is available - Joe wa6axe (Joe Glockner) 2. Summary stopped updating added QSOs for Band/Mode (K4YYL--- via Dxbase) 3. Figured out the summary issue not updating (K4YYL--- via Dxbase) 4. Question to WSJT-X program users - Joe wa6axe (Joe Glockner) 5. DX Info Window, Column Resizing Issue v1.10 (Fred Coelho) 6. Database update... (Steven Schmidt via Dxbase) 7. Re: Database update... (Fred Handscombe) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Jan 2015 13:50:44 -0600 (CST) From: Joe Glockner To: dxbase at mailman.qth.net Subject: [Dxbase] WSJT-X Ver 1.4 Beta (ONLY) to DXbase2007 BRIDGE is available - Joe wa6axe Message-ID: <21587397.223774.1422561044362.JavaMail.root at vznit170136.mailsrvcs.net> Content-Type: text/plain; charset=UTF-8 Users of the program WSJT-X Version 1.4 (Beta) (and ONLY 1.4 Beta) I have made a BRIDGE program that will auto-log the QSOs into DXbase2007. PSE - this is ONLY for Ver 1.4 (Beta) of this WSJT-X program. The webpage for my BRIDGE is at: http://www.navycthistory.com/wa6axe/wsjtxVer14bridgex.html PSE read all of the webpage info before trying to use. 73 Joe wa6axe ------------------------------ Message: 2 Date: Thu, 29 Jan 2015 15:42:06 -0500 From: K4YYL--- via Dxbase To: dxbase at mailman.qth.net Subject: [Dxbase] Summary stopped updating added QSOs for Band/Mode Message-ID: <1b32e.2f9c6ce7.41fbf51e at aol.com> Content-Type: text/plain; charset="US-ASCII" This happened a few years ago but I forgot what I did to cause this or to remedy it. Anyone know the common cause of this? Please advise. Thanks in advance. I have initialized, then when that didn't fix it, I restarted the program. Same deal after restart. No updates of B/M for new B/M QSOs. 73, Art, K4YYL ------------------------------ Message: 3 Date: Thu, 29 Jan 2015 18:20:14 -0500 From: K4YYL--- via Dxbase To: dxbase at mailman.qth.net Subject: [Dxbase] Figured out the summary issue not updating Message-ID: <22ccc.361498b4.41fc1a2e at aol.com> Content-Type: text/plain; charset="US-ASCII" Dummy here (moi) somehow had checked FO-29 in the default screen for satellites. All fixed. Sorry for the confusion. I'll learn! 73, Art, K4YYL ------------------------------ Message: 4 Date: Thu, 29 Jan 2015 17:49:28 -0600 (CST) From: Joe Glockner To: dxbase at mailman.qth.net Subject: [Dxbase] Question to WSJT-X program users - Joe wa6axe Message-ID: <14452579.266898.1422575368443.JavaMail.root at vznit170132.mailsrvcs.net> Content-Type: text/plain; charset=UTF-8 Knowing that the signal reports for JT65/JT9, etc is not compatible with the current format for DXbase RSTS and RSTR field -- Would YOU want me to (within my BRIDGE) change the signal report of (such as) -03 (which can not be placed in the current RSTS/RSTR fields) to simply 03 when I send the actual RSTS/RSTR fields info to DXbase2007???? I would LEAVE the -03 (as is) when I post them into the NOTES field and the Special1/Special2 fields. THIS change would be a HARD-WIRED -- this is the reason I am asking for your thoughts! 73 Joe wa6axe ------------------------------ Message: 5 Date: Wed, 4 Feb 2015 09:16:26 -0500 From: "Fred Coelho" To: Subject: [Dxbase] DX Info Window, Column Resizing Issue v1.10 Message-ID: <2500C8D0324244A69695F847640802D3 at Needlefish> Content-Type: text/plain; charset="us-ascii" Greetings, I've been hesitant to use v1.10 because my DX info window constantly resizes column width. It appears that the resizing is caused by the dynamic scroll bar which appears when the window fills up. All the other windows have fixed column width, this prevents resizing. Currently I leave space for the scroll bar, but when I resize my main window, I have to resize column width in the DX Info window. Is there a way to lock column width in the DX Info window? Joe, thanks again for the Bridging Tool. Works slick! fred WX1S ------------------------------ Message: 6 Date: Fri, 6 Feb 2015 02:57:38 +0000 (UTC) From: Steven Schmidt via Dxbase To: "dxbase at mailman.qth.net" Subject: [Dxbase] Database update... Message-ID: <1598799329.369584.1423191458213.JavaMail.yahoo at mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 So, I've been off the air for a while through a couple moves, but just got a station up and running again.? Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes.? Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually?? I used to be pretty good with it, but I'm out of practice.? I think my last manual update was Swain's Island... Thanks for any and all help, Steve? K4WA ------------------------------ Message: 7 Date: Sat, 07 Feb 2015 09:41:45 +0000 From: Fred Handscombe To: dxbase at mailman.qth.net Subject: Re: [Dxbase] Database update... Message-ID: <54D5DDD9.2010702 at homeshack.freeserve.co.uk> Content-Type: text/plain; charset=utf-8; format=flowed Hi Steven Surprised no-one answered Joe WA6AXE has written an excellent programme to update the main database. Seek it out! 73 Fred G4BWP On 06/02/2015 02:57, Steven Schmidt via Dxbase wrote: > So, I've been off the air for a while through a couple moves, but just got a station up and running again. Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes. Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually? I used to be pretty good with it, but I'm out of practice. I think my last manual update was Swain's Island... > Thanks for any and all help, > Steve K4WA > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ------------------------------ Subject: Digest Footer ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net ------------------------------ End of Dxbase Digest, Vol 130, Issue 1 ************************************** From ve3wej at gmail.com Sat Feb 7 08:44:11 2015 From: ve3wej at gmail.com (Dave ve3wej) Date: Sat, 7 Feb 2015 08:44:11 -0500 Subject: [Dxbase] Database update... In-Reply-To: <54D5DDD9.2010702@homeshack.freeserve.co.uk> References: <1598799329.369584.1423191458213.JavaMail.yahoo@mail.yahoo.com> <54D5DDD9.2010702@homeshack.freeserve.co.uk> Message-ID: but I think it is for the 1.06 or 1.07 version, and up... joe??? ? Dave Garber VE3WEJ / VE3IE On Sat, Feb 7, 2015 at 4:41 AM, Fred Handscombe < fredch at homeshack.freeserve.co.uk> wrote: > Hi Steven > > Surprised no-one answered > > Joe WA6AXE has written an excellent programme to update the main database. > > Seek it out! > > 73 Fred > G4BWP > > > On 06/02/2015 02:57, Steven Schmidt via Dxbase wrote: > >> So, I've been off the air for a while through a couple moves, but just >> got a station up and running again. Still running DXBase 2005 on an old >> computer with XP in the shack, and notice that there have been several (or >> more) prefix/country changes. Does anyone have a way to update the >> database easily, or instructions to (laboriously) update the database >> manually? I used to be pretty good with it, but I'm out of practice. I >> think my last manual update was Swain's Island... >> Thanks for any and all help, >> Steve K4WA >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From dxbase at mailman.qth.net Sat Feb 7 11:48:26 2015 From: dxbase at mailman.qth.net (Steven Schmidt via Dxbase) Date: Sat, 7 Feb 2015 10:48:26 -0600 Subject: [Dxbase] Database update... In-Reply-To: References: <1598799329.369584.1423191458213.JavaMail.yahoo@mail.yahoo.com> <54D5DDD9.2010702@homeshack.freeserve.co.uk> Message-ID: That's correct...Joe sent me all I need to know to upgrade to 2007 and then use his updater. Thanks, Joe! Sent from my iPad > On Feb 7, 2015, at 7:44 AM, Dave ve3wej wrote: > > but I think it is for the 1.06 or 1.07 version, and up... > > joe??? > > ? > > Dave Garber > VE3WEJ / VE3IE > > On Sat, Feb 7, 2015 at 4:41 AM, Fred Handscombe < > fredch at homeshack.freeserve.co.uk> wrote: > >> Hi Steven >> >> Surprised no-one answered >> >> Joe WA6AXE has written an excellent programme to update the main database. >> >> Seek it out! >> >> 73 Fred >> G4BWP >> >> >>> On 06/02/2015 02:57, Steven Schmidt via Dxbase wrote: >>> >>> So, I've been off the air for a while through a couple moves, but just >>> got a station up and running again. Still running DXBase 2005 on an old >>> computer with XP in the shack, and notice that there have been several (or >>> more) prefix/country changes. Does anyone have a way to update the >>> database easily, or instructions to (laboriously) update the database >>> manually? I used to be pretty good with it, but I'm out of practice. I >>> think my last manual update was Swain's Island... >>> Thanks for any and all help, >>> Steve K4WA >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Dxbase at mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From dxbase at mailman.qth.net Sun Feb 8 17:41:13 2015 From: dxbase at mailman.qth.net (Nick Mironov via Dxbase) Date: Sun, 8 Feb 2015 22:41:13 +0000 (UTC) Subject: [Dxbase] WSJT Signal Report In-Reply-To: References: Message-ID: <401201379.1620981.1423435273419.JavaMail.yahoo@mail.yahoo.com> Fred, it's a good function to send?dBs to Notes.I like it.?Push them into RST fields is not possible with DXBase2007 IMHO. 73, Nick ? From: Fred Coelho To: dxbase at mailman.qth.net Sent: Saturday, February 7, 2015 12:43 PM Subject: [Dxbase] WSJT Signal Report Joe, I wouldn't mind if the report were 599 and dB report continued to go to the Notes Field.? That is of course, if everyone else agrees. Fred? WX1S? ? -----Original Message----- From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of dxbase-request at mailman.qth.net Sent: Saturday, February 07, 2015 4:42 AM To: dxbase at mailman.qth.net Subject: Dxbase Digest, Vol 130, Issue 1 Send Dxbase mailing list submissions to ??? dxbase at mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit ??? http://mailman.qth.net/mailman/listinfo/dxbase or, via email, send a message with subject or body 'help' to ??? dxbase-request at mailman.qth.net You can reach the person managing the list at ??? dxbase-owner at mailman.qth.net When replying, please edit your Subject line so it is more specific than "Re: Contents of Dxbase digest..." Today's Topics: ? 1. WSJT-X Ver 1.4 Beta (ONLY) to DXbase2007 BRIDGE is available ? ? ? - Joe wa6axe (Joe Glockner) ? 2. Summary stopped updating added QSOs for Band/Mode ? ? ? (K4YYL--- via Dxbase) ? 3. Figured out the summary issue not updating (K4YYL--- via Dxbase) ? 4. Question to WSJT-X program users - Joe wa6axe (Joe Glockner) ? 5. DX Info Window, Column Resizing Issue v1.10 (Fred Coelho) ? 6. Database update... (Steven Schmidt via Dxbase) ? 7. Re: Database update... (Fred Handscombe) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Jan 2015 13:50:44 -0600 (CST) From: Joe Glockner To: dxbase at mailman.qth.net Subject: [Dxbase] WSJT-X Ver 1.4 Beta (ONLY) to DXbase2007 BRIDGE is ??? available - Joe wa6axe Message-ID: ??? <21587397.223774.1422561044362.JavaMail.root at vznit170136.mailsrvcs.net> ??? Content-Type: text/plain; charset=UTF-8 Users of the program WSJT-X Version 1.4 (Beta) (and ONLY 1.4 Beta) I have made a BRIDGE program that will auto-log the QSOs into DXbase2007. PSE - this is ONLY for Ver 1.4 (Beta) of this WSJT-X program. The webpage for my BRIDGE is at: http://www.navycthistory.com/wa6axe/wsjtxVer14bridgex.html PSE read all of the webpage info before trying to use. 73 Joe wa6axe ------------------------------ Message: 2 Date: Thu, 29 Jan 2015 15:42:06 -0500 From: K4YYL--- via Dxbase To: dxbase at mailman.qth.net Subject: [Dxbase] Summary stopped updating added QSOs for Band/Mode Message-ID: <1b32e.2f9c6ce7.41fbf51e at aol.com> Content-Type: text/plain; charset="US-ASCII" This happened a few years ago but I forgot what I did to cause? this or to remedy it. Anyone know the common cause of this? Please advise.? Thanks in advance. I have initialized, then when that didn't fix it, I restarted? the program. Same deal after restart. No updates of B/M for new? B/M QSOs. 73, Art, K4YYL ------------------------------ Message: 3 Date: Thu, 29 Jan 2015 18:20:14 -0500 From: K4YYL--- via Dxbase To: dxbase at mailman.qth.net Subject: [Dxbase] Figured out the summary issue not updating Message-ID: <22ccc.361498b4.41fc1a2e at aol.com> Content-Type: text/plain; charset="US-ASCII" Dummy here (moi) somehow had checked FO-29 in the default? screen for satellites. All fixed. Sorry for the confusion. I'll? learn! 73, Art, K4YYL ------------------------------ Message: 4 Date: Thu, 29 Jan 2015 17:49:28 -0600 (CST) From: Joe Glockner To: dxbase at mailman.qth.net Subject: [Dxbase] Question to WSJT-X program users - Joe wa6axe Message-ID: ??? <14452579.266898.1422575368443.JavaMail.root at vznit170132.mailsrvcs.net> ??? Content-Type: text/plain; charset=UTF-8 Knowing that the signal reports for JT65/JT9, etc is not compatible with the current format for DXbase RSTS and RSTR field -- Would YOU want me to (within my BRIDGE) change the signal report of (such as) -03 (which can not be placed in the current RSTS/RSTR fields) to simply 03 when I send the actual RSTS/RSTR fields info to DXbase2007???? I would LEAVE the -03 (as is) when I post them into the NOTES field and the Special1/Special2 fields. THIS change would be a HARD-WIRED -- this is the reason I am asking for your thoughts! 73 Joe wa6axe ------------------------------ Message: 5 Date: Wed, 4 Feb 2015 09:16:26 -0500 From: "Fred Coelho" To: Subject: [Dxbase] DX Info Window, Column Resizing Issue v1.10 Message-ID: <2500C8D0324244A69695F847640802D3 at Needlefish> Content-Type: text/plain;??? charset="us-ascii" Greetings, I've been hesitant to use v1.10 because my DX info window constantly resizes column width.? It appears that the resizing is caused by the dynamic scroll bar which appears when the window fills up.? All the other windows have fixed column width, this prevents resizing.? Currently I leave space for the scroll bar, but when I resize my main window, I have to resize column width in the DX Info window.? Is there a way to lock column width in the DX Info window? Joe, thanks again for the Bridging Tool.? Works slick! fred? WX1S ------------------------------ Message: 6 Date: Fri, 6 Feb 2015 02:57:38 +0000 (UTC) From: Steven Schmidt via Dxbase To: "dxbase at mailman.qth.net" Subject: [Dxbase] Database update... Message-ID: ??? <1598799329.369584.1423191458213.JavaMail.yahoo at mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 So, I've been off the air for a while through a couple moves, but just got a station up and running again.? Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes.? Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually?? I used to be pretty good with it, but I'm out of practice.? I think my last manual update was Swain's Island... Thanks for any and all help, Steve? K4WA ------------------------------ Message: 7 Date: Sat, 07 Feb 2015 09:41:45 +0000 From: Fred Handscombe To: dxbase at mailman.qth.net Subject: Re: [Dxbase] Database update... Message-ID: <54D5DDD9.2010702 at homeshack.freeserve.co.uk> Content-Type: text/plain; charset=utf-8; format=flowed Hi Steven Surprised no-one answered Joe WA6AXE has written an excellent programme to update the main database. Seek it out! 73 Fred G4BWP On 06/02/2015 02:57, Steven Schmidt via Dxbase wrote: >? So, I've been off the air for a while through a couple moves, but just got a station up and running again.? Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes.? Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually?? I used to be pretty good with it, but I'm out of practice.? I think my last manual update was Swain's Island... > Thanks for any and all help, > Steve? K4WA > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ------------------------------ Subject: Digest Footer ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net ------------------------------ End of Dxbase Digest, Vol 130, Issue 1 ************************************** ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From kp4p at hotmail.com Mon Feb 9 05:30:43 2015 From: kp4p at hotmail.com (Telesforo Figueroa) Date: Mon, 9 Feb 2015 10:30:43 +0000 Subject: [Dxbase] Import ADIF File to DXBase2007 Message-ID: Hello: This is an old topic. Probably I have done it before, but here I go. I have an ADIF file, from SD Contest Log and want to import it to DXBase 2007. I go to Non-DXBase import utility but the next window is one which requires a .MDB file to be open. Does that mean that I have to convert my ADIF file to .MDB? What I am missing? Am I doing something wrong? Please advise. Tele KP4P From K2LS at TRIAD.RR.COM Mon Feb 9 11:09:56 2015 From: K2LS at TRIAD.RR.COM (K2LS) Date: Mon, 09 Feb 2015 11:09:56 -0500 Subject: [Dxbase] Import Message-ID: <54D8DBD4.4000700@TRIAD.RR.COM> The MDB file Is the log file ie: KP4P.mdb. 73 Larry K2LS DxPacketcluster node DXC.K2LS.COM Spots from NA zones 1-8 only. From jpreston1 at cox.net Mon Feb 9 11:11:18 2015 From: jpreston1 at cox.net (Jim Preston) Date: Mon, 09 Feb 2015 08:11:18 -0800 Subject: [Dxbase] Import ADIF File to DXBase2007 In-Reply-To: References: Message-ID: <54D8DC26.6090101@cox.net> The .mdb file it is asking for is your DXbase log file. In my case, it is N6VH.mdb. In your case, probably KP4P.mdb (just a guess). This the target file. After you specify the .mdb file, the next screen will have a place to specify the source file, which is the SD Contest Log file. 73, Jim N6VH On 09-Feb-15 2:30 AM, Telesforo Figueroa wrote: > Hello: > This is an old topic. Probably I have done it before, but here I go. > > I have an ADIF file, from SD Contest Log and want to import it to DXBase 2007. > I go to Non-DXBase import utility but the next window is one which requires a .MDB file to be open. > Does that mean that I have to convert my ADIF file to .MDB? > What I am missing? Am I doing something wrong? > Please advise. > > Tele > KP4P > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From jv at kt4u.org Sat Feb 14 07:35:34 2015 From: jv at kt4u.org (JV) Date: Sat, 14 Feb 2015 07:35:34 -0500 (Eastern Standard Time) Subject: [Dxbase] Problems Message-ID: <54DF4116.00000F.03184@SOMELUCK> Hi Guys I have a few problems that just occurred Friday. When I click on a QSO in the log file, the summary window will not show the QSOs that were worked. I can click on the little binocular and enter a QSO and the previous QSO window will come up and show the QSOs. I tried clicking on the Initialize Table Data window and get a message saying No Current Record. I have serval other logs and they are OK. Any one know what happen and what do I need to do to correct these programs? I am still using DXBase 2005. Thank You JV KT4U From wa6axe at verizon.net Sat Feb 14 09:50:45 2015 From: wa6axe at verizon.net (Joe Glockner) Date: Sat, 14 Feb 2015 08:50:45 -0600 (CST) Subject: [Dxbase] Problems Message-ID: <4054476.980507.1423925446001.JavaMail.root@vms170015.mailsrvcs.net> From wa6axe at verizon.net Sat Feb 14 09:52:37 2015 From: wa6axe at verizon.net (Joe Glockner) Date: Sat, 14 Feb 2015 08:52:37 -0600 (CST) Subject: [Dxbase] Problems Message-ID: <9730769.980594.1423925557756.JavaMail.root@vms170015.mailsrvcs.net> JV, Follow the detailed instructions in the HELP Files under the index of "Database Repair". You have a corrupted logbook mdb file. But, nothing is lost. 73 Joe wa6axe On 02/14/15, JV wrote: Hi Guys I have a few problems that just occurred Friday. When I click on a QSO in the log file, the summary window will not show the QSOs that were worked. I can click on the little binocular and enter a QSO and the previous QSO window will come up and show the QSOs. I tried clicking on the Initialize Table Data window and get a message saying No Current Record. I have serval other logs and they are OK. Any one know what happen and what do I need to do to correct these programs? I am still using DXBase 2005. Thank You JV KT4U ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From w5ua at juno.com Sat Feb 14 16:57:50 2015 From: w5ua at juno.com (w5ua at juno.com) Date: Sat, 14 Feb 2015 15:57:50 -0600 Subject: [Dxbase] AR V 6.0 and DXBase Interoperatability Message-ID: I have a question for the reflector. Dave, W9PA and I operate the WF5E Cluster. It is currently running AR v 4.0 with v 6.0 running along side. It is working well, BUT, the v 6.0 appears dramatically superior. BUT also, the v 6.0 requires the client operator to have the capability to interface with a v 6.0 compatible Cluster client. My question is: Does DXBase internet packet capability support v 6.0 AR? I suspect the current version does not, but it would sure be nice if it could/would. Anyone know?? I thought I would ask to see if any of you know or can advise Dave and I. VE7CC does support v 6.0, but I prefer having the Cluster appear in my DXBase window. Thanks, 73 Joe Milam W5UA ____________________________________________________________ How Old Men Tighten Skin 63 Year Old Man Shares DIY Skin Tightening Method You Can Do From Home http://thirdpartyoffers.juno.com/TGL3141/54dfc4f05567e44f07454st03vuc From w4ag at mindspring.com Sun Feb 15 15:00:10 2015 From: w4ag at mindspring.com (Stan) Date: Sun, 15 Feb 2015 15:00:10 -0500 Subject: [Dxbase] LOTW Import Problem Message-ID: <005101d0495a$01321c90$039655b0$@mindspring.com> I just uploaded to LOTW for the first time in several years, so maybe I have forgotten something important. I downloaded the LOTW-generated adi file to update my log. When I use the non-dxb import app and specify LoTW ADF as the file type, I get errors on every record. No harm done to the mdb log file, but nothing imported. Is there a setting somewhere I am forgetting? Thanks, Stan, W4AG From dgaikins at sbcglobal.net Mon Feb 16 12:33:27 2015 From: dgaikins at sbcglobal.net (Don Gaikins) Date: Mon, 16 Feb 2015 11:33:27 -0600 Subject: [Dxbase] AR V 6.0 and DXBase Interoperatability In-Reply-To: References: Message-ID: <54E229E6.2040901@sbcglobal.net> Dave, I don't know if this helps or not but here goes since on one else replied to your question. I run VE7CC cluster in the DXBASE cluster window with no problems. I am not sure which version I am logged onto, but no problems. Now that said, I think it is "CC " cluster not AR. I have also logged onto Dave's W9ZRX cluster when VE7CC's cluster is down for what ever reason. I have had no problems with that either (all in the DXB window). I know that Dave is going to shut down the W9ZRX cluster soon. I hope I can just modify the host file by changing the W9ZRX to W9PA and still log on. Good Luck Don W0VM On 2/14/2015 3:57 PM, w5ua at juno.com wrote: > I have a question for the reflector. Dave, W9PA and I operate the WF5E > Cluster. It is currently running AR v 4.0 with v 6.0 running along side. > It is working well, BUT, the v 6.0 appears dramatically superior. > > BUT also, the v 6.0 requires the client operator to have the capability > to interface with a v 6.0 compatible Cluster client. My question is: > Does DXBase internet packet capability support v 6.0 AR? I suspect the > current version does not, but it would sure be nice if it could/would. > Anyone know?? > > I thought I would ask to see if any of you know or can advise Dave and I. > VE7CC does support v 6.0, but I prefer having the Cluster appear in my > DXBase window. > > Thanks, > > 73 > > Joe Milam W5UA > > ____________________________________________________________ > How Old Men Tighten Skin > 63 Year Old Man Shares DIY Skin Tightening Method You Can Do From Home > http://thirdpartyoffers.juno.com/TGL3141/54dfc4f05567e44f07454st03vuc > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From dxbase at mailman.qth.net Thu Feb 19 10:19:23 2015 From: dxbase at mailman.qth.net (Steven Schmidt via Dxbase) Date: Thu, 19 Feb 2015 15:19:23 +0000 (UTC) Subject: [Dxbase] LOTW Import Problem In-Reply-To: <005101d0495a$01321c90$039655b0$@mindspring.com> References: <005101d0495a$01321c90$039655b0$@mindspring.com> Message-ID: <1324522211.1619281.1424359163835.JavaMail.yahoo@mail.yahoo.com> Stan, Did you?get an answer to your question?? I'm interested, because I'm about to try to?create files for two calls and three locations to upload to LoTW for the very?first time and have to figure out how to do it... Thanks, Steve? K4WA ? From: Stan To: Dxbase at mailman.qth.net Sent: Sunday, February 15, 2015 2:00 PM Subject: [Dxbase] LOTW Import Problem I just uploaded to LOTW for the first time in several years, so maybe I have forgotten something important. I downloaded the LOTW-generated adi file to update my log. When I use the non-dxb import app and specify LoTW ADF as the file type, I get errors on every record. No harm done to the mdb log file, but nothing imported. Is there a setting somewhere I am forgetting? Thanks, Stan, W4AG ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From ve3wej at gmail.com Thu Feb 19 15:29:55 2015 From: ve3wej at gmail.com (Dave ve3wej) Date: Thu, 19 Feb 2015 15:29:55 -0500 Subject: [Dxbase] LOTW Import Problem In-Reply-To: <1324522211.1619281.1424359163835.JavaMail.yahoo@mail.yahoo.com> References: <005101d0495a$01321c90$039655b0$@mindspring.com> <1324522211.1619281.1424359163835.JavaMail.yahoo@mail.yahoo.com> Message-ID: I have been using lotw import here, and had few issues. what errors are you getting wrong state, always will happen with canadian calls not sure if I can help, but the error would help us a little, maybe Dave Garber VE3WEJ / VE3IE On Thu, Feb 19, 2015 at 10:19 AM, Steven Schmidt via Dxbase < dxbase at mailman.qth.net> wrote: > Stan, > Did you get an answer to your question? I'm interested, because I'm about > to try to create files for two calls and three locations to upload to LoTW > for the very first time and have to figure out how to do it... > Thanks, > Steve K4WA > From: Stan > To: Dxbase at mailman.qth.net > Sent: Sunday, February 15, 2015 2:00 PM > Subject: [Dxbase] LOTW Import Problem > > I just uploaded to LOTW for the first time in several years, so maybe I > have > forgotten something important. I downloaded the LOTW-generated adi file to > update my log. When I use the non-dxb import app and specify LoTW ADF as > the > file type, I get errors on every record. No harm done to the mdb log file, > but nothing imported. Is there a setting somewhere I am forgetting? > > > > Thanks, > > Stan, W4AG > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From wa6axe at verizon.net Thu Feb 19 15:33:53 2015 From: wa6axe at verizon.net (Joe Glockner) Date: Thu, 19 Feb 2015 14:33:53 -0600 (CST) Subject: [Dxbase] LOTW Import Problem Message-ID: <14054687.1236384.1424378033080.JavaMail.root@vms170015.mailsrvcs.net> ALL: I worked with Stan - and the problem he had was that he was downloading the wrong file from LOTW website .. He was downloading the AWARDS adi file -- not the regular CFMs LOTW adi file.. He is all ok nw. 73 Joe wa6axe On 02/19/15, Steven Schmidt via Dxbase wrote: Stan, Did you? get an answer to your question?? I'm interested, because I'm about to try to? create files for two calls and three locations to upload to LoTW for the very? first time and have to figure out how to do it... Thanks, Steve? K4WA ? From: Stan To: Dxbase at mailman.qth.net Sent: Sunday, February 15, 2015 2:00 PM Subject: [Dxbase] LOTW Import Problem I just uploaded to LOTW for the first time in several years, so maybe I have forgotten something important. I downloaded the LOTW-generated adi file to update my log. When I use the non-dxb import app and specify LoTW ADF as the file type, I get errors on every record. No harm done to the mdb log file, but nothing imported. Is there a setting somewhere I am forgetting? Thanks, Stan, W4AG ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From wa6axe at verizon.net Thu Feb 19 19:07:07 2015 From: wa6axe at verizon.net (Joe Glockner) Date: Thu, 19 Feb 2015 18:07:07 -0600 (CST) Subject: [Dxbase] Heads-up on upcoming operations as TO66R (Ambiguous Prefix) Message-ID: <7288549.731160.1424390827914.JavaMail.root@vznit170130.mailsrvcs.net> Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ... // TO66R // Just saw that the callsign TO66R from Guadeloupe (NA-102) will be active in the ARRL International DX CW contest. This callsign will default to France (F) because of the Alias Map table mapping. This callsign is not currently MAPPED in the CALLMAP table -- so, if you want, simply make a dummy QSO with this callsign and change the PREFIX column of your logbook mdb file to FG and then when the pop-up asks you if you want to save this TO66R mapped to FG -- say YES/OK ---- Then delete that dummy QSO .. The CALLMAP table will now be updated in advance so that if you work this station -- it will have the correct PREFIX in your logbook QSO window ... 73 Joe WA6AXE