From billmorgan1 at centurylink.net Mon Sep 8 21:18:11 2014 From: billmorgan1 at centurylink.net (BILL MORGAN) Date: Mon, 8 Sep 2014 20:18:11 -0500 Subject: [Dxbase] NEW IOTA Message-ID: <007401cfcbcb$eccbc2d0$c6634870$@net> Hello: While I was away from home for a few weeks this past summer I think a message was posted on the reflector giving directions for entering the new IOTAs into DXbase but now that I have returned home I cannot find the information. If I did not dream it, cold someone please forward that info to me. Thanks 73 Bill, K0DEQ K0deq at arrl.net From ae5b at arrl.net Fri Sep 12 22:04:48 2014 From: ae5b at arrl.net (AE5B) Date: Fri, 12 Sep 2014 21:04:48 -0500 Subject: [Dxbase] CW Keying with Widows 7 or 8 Message-ID: <22771ad6g6b29rit5dlp7460bgk99lisjd@4ax.com> Are CW memory buttons 1-9 on Dxbase functional under Windows 7 or 8. If so, how are they interfaced? John AE5B From nealk3nc at gmail.com Fri Sep 12 23:05:22 2014 From: nealk3nc at gmail.com (Neal Campbell) Date: Fri, 12 Sep 2014 23:05:22 -0400 Subject: [Dxbase] CW Keying with Widows 7 or 8 In-Reply-To: <22771ad6g6b29rit5dlp7460bgk99lisjd@4ax.com> References: <22771ad6g6b29rit5dlp7460bgk99lisjd@4ax.com> Message-ID: If they are not, I would love to know it! You will optimally need a 'winkey' keyer to use the cw memories. There is a cw keyer built inside DXB but its not world-class by any means so I recommend using the winkey devices with DXB. 73 *BIG LABOR DAY SALE IN PROGRESS!* Neal Campbell Abroham Neal LLC On Fri, Sep 12, 2014 at 10:04 PM, AE5B wrote: > Are CW memory buttons 1-9 on Dxbase functional under Windows 7 or 8. If > so, how > are they interfaced? > > > John > AE5B > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From ae5b at arrl.net Sat Sep 13 00:06:51 2014 From: ae5b at arrl.net (AE5B) Date: Fri, 12 Sep 2014 23:06:51 -0500 Subject: [Dxbase] CW Keying with Widows 7 or 8 In-Reply-To: <22771ad6g6b29rit5dlp7460bgk99lisjd@4ax.com> References: <22771ad6g6b29rit5dlp7460bgk99lisjd@4ax.com> Message-ID: Another queston. Can the CW speed still be click adjusted from the DXB screen with a winkey device? John >If they are not, I would love to know it! > >You will optimally need a 'winkey' keyer to use the cw memories. There is a >cw keyer built inside DXB but its not world-class by any means so I >recommend using the winkey devices with DXB. > >73 > >*BIG LABOR DAY SALE IN PROGRESS!* >Neal Campbell >Abroham Neal LLC > > > >On Fri, Sep 12, 2014 at 10:04 PM, AE5B wrote: > >> Are CW memory buttons 1-9 on Dxbase functional under Windows 7 or 8. If >> so, how >> are they interfaced? >> >> >> John From 4z1uf at bezeqint.net Sat Sep 13 01:10:44 2014 From: 4z1uf at bezeqint.net (Ilya Zozin, 4Z1UF) Date: Sat, 13 Sep 2014 08:10:44 +0300 Subject: [Dxbase] CW Keying with Widows 7 or 8 In-Reply-To: References: <22771ad6g6b29rit5dlp7460bgk99lisjd@4ax.com> Message-ID: <000101cfcf11$1866d5e0$493481a0$@bezeqint.net> I'm using CW buffers/memories all the time, under Win 7. Now it works with Winkey, couple of years ago- without. And yes, I'm adjusting the CW speed from the DXB screen, as well as from shortcut keys that I assigned. 73, Ilya, 4Z1UF -----Original Message----- From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of AE5B Sent: Saturday, September 13, 2014 07:07 To: dxbase at mailman.qth.net; dxbase at yahoogroups.com Subject: Re: [Dxbase] CW Keying with Widows 7 or 8 Another queston. Can the CW speed still be click adjusted from the DXB screen with a winkey device? John >If they are not, I would love to know it! > >You will optimally need a 'winkey' keyer to use the cw memories. There >is a cw keyer built inside DXB but its not world-class by any means so >I recommend using the winkey devices with DXB. > >73 > >*BIG LABOR DAY SALE IN PROGRESS!* >Neal Campbell >Abroham Neal LLC > > > >On Fri, Sep 12, 2014 at 10:04 PM, AE5B wrote: > >> Are CW memory buttons 1-9 on Dxbase functional under Windows 7 or 8. >> If so, how are they interfaced? >> >> >> John ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com From ve3vid at hotmail.com Tue Sep 16 12:20:04 2014 From: ve3vid at hotmail.com (David VE3VID) Date: Tue, 16 Sep 2014 12:20:04 -0400 Subject: [Dxbase] DX Clusters? Message-ID: Hi everyone I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. Is there any way to filter out the DX reports from stations on other continents? 73Davidhttp://www.ve3vid.webs.com/ From jpreston1 at cox.net Tue Sep 16 13:06:34 2014 From: jpreston1 at cox.net (Jim Preston) Date: Tue, 16 Sep 2014 10:06:34 -0700 Subject: [Dxbase] DX Clusters? In-Reply-To: References: Message-ID: <54186E1A.6090603@cox.net> I highly recommend the program CC User by VE7CC. It will do the filtering for you. Just set up the filters and have it "tell" the cluster what filters you want. The cluster will then remember your settings. I use the program as interface between Dxbase and the cluster. I use the VE7CC cluster, but you can use any cluster that the program is compatible with. 73, Jim N6VH On 9/16/2014 9:20 AM, David VE3VID wrote: > Hi everyone > I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. > Is there any way to filter out the DX reports from stations on other continents? > 73Davidhttp://www.ve3vid.webs.com/ > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From k6ds at irfutures.com Tue Sep 16 13:29:11 2014 From: k6ds at irfutures.com (K6DS) Date: Tue, 16 Sep 2014 10:29:11 -0700 Subject: [Dxbase] DX Clusters? Message-ID: <54187367.7020109@irfutures.com> And I use N7OD, same deal... Great cluster and the help file will tell you how to set up your filters. 73, Dennis - K6DS I highly recommend the program CC User by VE7CC. It will do the filtering for you. Just set up the filters and have it "tell" the cluster what filters you want. The cluster will then remember your settings. I use the program as interface between Dxbase and the cluster. I use the VE7CC cluster, but you can use any cluster that the program is compatible with. 73, Jim N6VH On 9/16/2014 9:20 AM, David VE3VID wrote: Hi everyone I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. Is there any way to filter out the DX reports from stations on other continents? 73Davidhttp://www.ve3vid.webs.com/ ______________________________________________________________ Dxbase mailing list Home:http://mailman.qth.net/mailman/listinfo/dxbase Help:http://mailman.qth.net/mmfaq.htm Post:mailto:Dxbase at mailman.qth.net This list hosted by:http://www.qsl.net Please help support this email list:http://www.qsl.net/donate.html From crownhaven at bellsouth.net Tue Sep 16 14:11:12 2014 From: crownhaven at bellsouth.net (Crownhaven) Date: Tue, 16 Sep 2014 13:11:12 -0500 Subject: [Dxbase] DX Clusters? In-Reply-To: <54186E1A.6090603@cox.net> References: <54186E1A.6090603@cox.net> Message-ID: <54187D40.7050507@bellsouth.net> I use the same thing through DXB. Works fine. Does exactly what you want after you figure out how the filters work. Steve, N4JQQ On 9/16/2014 12:06 PM, Jim Preston wrote: > I highly recommend the program CC User by VE7CC. It will do the > filtering for you. Just set up the filters and have it "tell" the > cluster what filters you want. The cluster will then remember your > settings. > > I use the program as interface between Dxbase and the cluster. I use > the VE7CC cluster, but you can use any cluster that the program is > compatible with. > > 73, > > Jim N6VH > > > On 9/16/2014 9:20 AM, David VE3VID wrote: >> Hi everyone >> I am wondering which is the preferred DX Cluster to use for >> DXbase?After getting v1.10 installed and running I set the cluster to >> Neil's K3NC. >> Is there any way to filter out the DX reports from stations on other >> continents? >> 73Davidhttp://www.ve3vid.webs.com/ >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From cw_de_n5op at sbcglobal.net Tue Sep 16 14:29:53 2014 From: cw_de_n5op at sbcglobal.net (Kim Elmore) Date: Tue, 16 Sep 2014 13:29:53 -0500 Subject: [Dxbase] DX Clusters? In-Reply-To: References: Message-ID: <58FB1E11-C50D-4589-AE1C-FD839F5162BC@sbcglobal.net> I've never been able to figure out the frets for the VE7CC clusters. Guess I never found a tutorial that worked for me. I'll spend some more time at it. Kim N5OP "People that make music together cannot be enemies, at least as long as the music lasts." -- Paul Hindemith > On Sep 16, 2014, at 11:20, David VE3VID wrote: > > Hi everyone > I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. > Is there any way to filter out the DX reports from stations on other continents? > 73Davidhttp://www.ve3vid.webs.com/ > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From ve3vid at hotmail.com Tue Sep 16 15:11:44 2014 From: ve3vid at hotmail.com (David VE3VID) Date: Tue, 16 Sep 2014 15:11:44 -0400 Subject: [Dxbase] DX Clusters? In-Reply-To: <54186E1A.6090603@cox.net> References: ,<54186E1A.6090603@cox.net> Message-ID: Excellent. Thank you. This sounds promising. Felt the need this morning when there were stations on 10m, some good DX. Some of the spots were being reported by EU hams - not so relivant 73David http://www.ve3vid.webs.com/ > Date: Tue, 16 Sep 2014 10:06:34 -0700 > From: jpreston1 at cox.net > To: dxbase at mailman.qth.net > Subject: Re: [Dxbase] DX Clusters? > > I highly recommend the program CC User by VE7CC. It will do the > filtering for you. Just set up the filters and have it "tell" the > cluster what filters you want. The cluster will then remember your settings. > > I use the program as interface between Dxbase and the cluster. I use the > VE7CC cluster, but you can use any cluster that the program is > compatible with. > > 73, > > Jim N6VH > > > On 9/16/2014 9:20 AM, David VE3VID wrote: > > Hi everyone > > I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. > > Is there any way to filter out the DX reports from stations on other continents? > > 73Davidhttp://www.ve3vid.webs.com/ > > > > ______________________________________________________________ > > Dxbase mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dxbase at mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From ve3vid at hotmail.com Tue Sep 16 15:15:37 2014 From: ve3vid at hotmail.com (David VE3VID) Date: Tue, 16 Sep 2014 15:15:37 -0400 Subject: [Dxbase] DX Clusters? In-Reply-To: References: , <54186E1A.6090603@cox.net>, Message-ID: Thanks so much for all your replies and input. best regards & 73David http://www.ve3vid.webs.com/ > From: ve3vid at hotmail.com > To: dxbase at mailman.qth.net > Date: Tue, 16 Sep 2014 15:11:44 -0400 > Subject: Re: [Dxbase] DX Clusters? > > Excellent. Thank you. This sounds promising. > Felt the need this morning when there were stations on 10m, some good DX. Some of the spots were being reported by EU hams - not so relivant > 73David > http://www.ve3vid.webs.com/ > > > > Date: Tue, 16 Sep 2014 10:06:34 -0700 > > From: jpreston1 at cox.net > > To: dxbase at mailman.qth.net > > Subject: Re: [Dxbase] DX Clusters? > > > > I highly recommend the program CC User by VE7CC. It will do the > > filtering for you. Just set up the filters and have it "tell" the > > cluster what filters you want. The cluster will then remember your settings. > > > > I use the program as interface between Dxbase and the cluster. I use the > > VE7CC cluster, but you can use any cluster that the program is > > compatible with. > > > > 73, > > > > Jim N6VH > > > > > > On 9/16/2014 9:20 AM, David VE3VID wrote: > > > Hi everyone > > > I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. > > > Is there any way to filter out the DX reports from stations on other continents? > > > 73Davidhttp://www.ve3vid.webs.com/ > > > > > > ______________________________________________________________ > > > Dxbase mailing list > > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > > Help: http://mailman.qth.net/mmfaq.htm > > > Post: mailto:Dxbase at mailman.qth.net > > > > > > This list hosted by: http://www.qsl.net > > > Please help support this email list: http://www.qsl.net/donate.html > > > > > ______________________________________________________________ > > Dxbase mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dxbase at mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From nealk3nc at gmail.com Tue Sep 16 15:38:52 2014 From: nealk3nc at gmail.com (Neal Campbell) Date: Tue, 16 Sep 2014 15:38:52 -0400 Subject: [Dxbase] DX Clusters? In-Reply-To: References: <54186E1A.6090603@cox.net>

Message-ID: How could K3NC not be the preferred DXBase cluster? In spite of all the comments, all of the clusters are connected to each other (minus some filtering we do for sources like DXSummit, W3LPL, etc that contribute less than valuable spots (at least as viewed by cluster sysops). We all have local CW Skimmer nodes available if you so desire. My recommendation is to use VE7CC's program, log on to your favorite cluster and set its filters.Then you can disconnect and connect directly from DXB and all your filtering will be set. You can also connect to VE7CC's program directly from DXB but I find that more trouble than its worth. Just use Lee's program to do your filters and you have it made. 73 *BIG LABOR DAY SALE IN PROGRESS!* Neal Campbell Abroham Neal LLC On Tue, Sep 16, 2014 at 3:15 PM, David VE3VID wrote: > Thanks so much for all your replies and input. > best regards & 73David > > http://www.ve3vid.webs.com/ > > > > From: ve3vid at hotmail.com > > To: dxbase at mailman.qth.net > > Date: Tue, 16 Sep 2014 15:11:44 -0400 > > Subject: Re: [Dxbase] DX Clusters? > > > > Excellent. Thank you. This sounds promising. > > Felt the need this morning when there were stations on 10m, some good > DX. Some of the spots were being reported by EU hams - not so relivant > > 73David > > http://www.ve3vid.webs.com/ > > > > > > > Date: Tue, 16 Sep 2014 10:06:34 -0700 > > > From: jpreston1 at cox.net > > > To: dxbase at mailman.qth.net > > > Subject: Re: [Dxbase] DX Clusters? > > > > > > I highly recommend the program CC User by VE7CC. It will do the > > > filtering for you. Just set up the filters and have it "tell" the > > > cluster what filters you want. The cluster will then remember your > settings. > > > > > > I use the program as interface between Dxbase and the cluster. I use > the > > > VE7CC cluster, but you can use any cluster that the program is > > > compatible with. > > > > > > 73, > > > > > > Jim N6VH > > > > > > > > > On 9/16/2014 9:20 AM, David VE3VID wrote: > > > > Hi everyone > > > > I am wondering which is the preferred DX Cluster to use for > DXbase?After getting v1.10 installed and running I set the cluster to > Neil's K3NC. > > > > Is there any way to filter out the DX reports from stations on other > continents? > > > > 73Davidhttp://www.ve3vid.webs.com/ > > > > > > > > ______________________________________________________________ > > > > Dxbase mailing list > > > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > > > Help: http://mailman.qth.net/mmfaq.htm > > > > Post: mailto:Dxbase at mailman.qth.net > > > > > > > > This list hosted by: http://www.qsl.net > > > > Please help support this email list: http://www.qsl.net/donate.html > > > > > > > ______________________________________________________________ > > > Dxbase mailing list > > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > > Help: http://mailman.qth.net/mmfaq.htm > > > Post: mailto:Dxbase at mailman.qth.net > > > > > > This list hosted by: http://www.qsl.net > > > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ > > Dxbase mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dxbase at mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > From rich at n7tr.com Tue Sep 16 18:16:58 2014 From: rich at n7tr.com (Rich Hallman - N7TR) Date: Tue, 16 Sep 2014 22:16:58 +0000 Subject: [Dxbase] DX Clusters? In-Reply-To: References: <54186E1A.6090603@cox.net>

, Message-ID: Does cc cluster support ar cluster version 6 yet or still just version 4 nodes? Many of the core sysop nodes are completely dropping version 4 for version 6 which is a completely different format. Rich Hallman, N7TR Ex. KI3V, N3AMK, HL9RH, A92FN > On Sep 16, 2014, at 12:39 PM, "Neal Campbell" wrote: > > How could K3NC not be the preferred DXBase cluster? > > In spite of all the comments, all of the clusters are connected to each > other (minus some filtering we do for sources like DXSummit, W3LPL, etc > that contribute less than valuable spots (at least as viewed by cluster > sysops). We all have local CW Skimmer nodes available if you so desire. > > My recommendation is to use VE7CC's program, log on to your favorite > cluster and set its filters.Then you can disconnect and connect directly > from DXB and all your filtering will be set. > > You can also connect to VE7CC's program directly from DXB but I find that > more trouble than its worth. Just use Lee's program to do your filters and > you have it made. > > 73 > > *BIG LABOR DAY SALE IN PROGRESS!* > Neal Campbell > Abroham Neal LLC > > > >> On Tue, Sep 16, 2014 at 3:15 PM, David VE3VID wrote: >> >> Thanks so much for all your replies and input. >> best regards & 73David >> >> http://www.ve3vid.webs.com/ >> >> >>> From: ve3vid at hotmail.com >>> To: dxbase at mailman.qth.net >>> Date: Tue, 16 Sep 2014 15:11:44 -0400 >>> Subject: Re: [Dxbase] DX Clusters? >>> >>> Excellent. Thank you. This sounds promising. >>> Felt the need this morning when there were stations on 10m, some good >> DX. Some of the spots were being reported by EU hams - not so relivant >>> 73David >>> http://www.ve3vid.webs.com/ >>> >>> >>>> Date: Tue, 16 Sep 2014 10:06:34 -0700 >>>> From: jpreston1 at cox.net >>>> To: dxbase at mailman.qth.net >>>> Subject: Re: [Dxbase] DX Clusters? >>>> >>>> I highly recommend the program CC User by VE7CC. It will do the >>>> filtering for you. Just set up the filters and have it "tell" the >>>> cluster what filters you want. The cluster will then remember your >> settings. >>>> >>>> I use the program as interface between Dxbase and the cluster. I use >> the >>>> VE7CC cluster, but you can use any cluster that the program is >>>> compatible with. >>>> >>>> 73, >>>> >>>> Jim N6VH >>>> >>>> >>>>> On 9/16/2014 9:20 AM, David VE3VID wrote: >>>>> Hi everyone >>>>> I am wondering which is the preferred DX Cluster to use for >> DXbase?After getting v1.10 installed and running I set the cluster to >> Neil's K3NC. >>>>> Is there any way to filter out the DX reports from stations on other >> continents? >>>>> 73Davidhttp://www.ve3vid.webs.com/ >>>>> >>>>> ______________________________________________________________ >>>>> Dxbase mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:Dxbase at mailman.qth.net >>>>> >>>>> This list hosted by: http://www.qsl.net >>>>> Please help support this email list: http://www.qsl.net/donate.html >>>> ______________________________________________________________ >>>> Dxbase mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Dxbase at mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Dxbase at mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Tue Sep 16 18:33:23 2014 From: crownhaven at bellsouth.net (Crownhaven) Date: Tue, 16 Sep 2014 17:33:23 -0500 Subject: [Dxbase] VK9NT Message-ID: <5418BAB3.2000309@bellsouth.net> When I log VK9NT it defaults to the prefix VK9G, Territory of New Guinea. When I change the prefix to VK9N, or Norfolk Island and attempt to log it, it won't let me map that call to the database. I go to my logged spot and click on it and it shows as Norfolk Island but when I go back to the spot of the same call it shows up in the summary as Territory of New Guinea. I can't figure this out. Steve, N4JQQ From dxbase at mailman.qth.net Tue Sep 16 19:06:35 2014 From: dxbase at mailman.qth.net (Joseph Glockner via Dxbase) Date: Tue, 16 Sep 2014 16:06:35 -0700 Subject: [Dxbase] [dxbase] VK9NT In-Reply-To: <5418BAB3.2000309@bellsouth.net> References: <5418BAB3.2000309@bellsouth.net> Message-ID: <1410908795.88538.YahooMailNeo@web164006.mail.gq1.yahoo.com> Go to the CALL MAP table within DXbase -- TOOLS / Database access / country prefixes / CALL MAP tab and scrolldown to the current entry for VK9NT and change that entry to READ as fols: Callsign Prefix Old1 Prefix Old1 Date VK9NT VK9N VK9G 2013-05-01 This will let you do your thing for your VK9NT QSO entry 73 Joe wa6axe ________________________________ From: "Crownhaven crownhaven at bellsouth.net [dxbase]" To: DXBase Reflector ; dxbase at yahoogroups.com Sent: Tuesday, September 16, 2014 5:33 PM Subject: [dxbase] VK9NT When I log VK9NT it defaults to the prefix VK9G, Territory of New Guinea. When I change the prefix to VK9N, or Norfolk Island and attempt to log it, it won't let me map that call to the database. I go to my logged spot and click on it and it shows as Norfolk Island but when I go back to the spot of the same call it shows up in the summary as Territory of New Guinea. I can't figure this out. Steve, N4JQQ __._,_.___ ________________________________ Posted by: Crownhaven ________________________________ Reply via web post ? Reply to sender ? Reply to group ? Start a New Topic ? Messages in this topic (1) ________________________________ Yahoo Groups New Improved Groups Search Searching for new groups to join is easier than ever. We've honed our algorithm to bring you better search results based on relevance and activity. Try it today! ________________________________ Improvements in Yahoo Groups Search Searching for new groups to join is easier than ever. We've honed our algorithm to bring you better search results based on relevance and activity. Try it today! ________________________________ Visit Your Group ? Privacy ? Unsubscribe ? Terms of Use . __,_._,___ From gyates at dreamscape.com Tue Sep 16 20:08:18 2014 From: gyates at dreamscape.com (gyates at dreamscape.com) Date: Tue, 16 Sep 2014 20:08:18 -0400 Subject: [Dxbase] VK9NT In-Reply-To: <5418BAB3.2000309@bellsouth.net> References: <5418BAB3.2000309@bellsouth.net> Message-ID: <002401cfd20b$7d61fa40$7825eec0$@dreamscape.com> I have the same problem. -----Original Message----- From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Crownhaven Sent: Tuesday, September 16, 2014 6:33 PM To: DXBase Reflector; dxbase at yahoogroups.com Subject: [Dxbase] VK9NT When I log VK9NT it defaults to the prefix VK9G, Territory of New Guinea. When I change the prefix to VK9N, or Norfolk Island and attempt to log it, it won't let me map that call to the database. I go to my logged spot and click on it and it shows as Norfolk Island but when I go back to the spot of the same call it shows up in the summary as Territory of New Guinea. I can't figure this out. Steve, N4JQQ ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4765 / Virus Database: 4015/8224 - Release Date: 09/16/14 ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4765 / Virus Database: 4015/8224 - Release Date: 09/16/14 From ve3vid at hotmail.com Thu Sep 18 10:32:47 2014 From: ve3vid at hotmail.com (David VE3VID) Date: Thu, 18 Sep 2014 10:32:47 -0400 Subject: [Dxbase] DX Clusters? Message-ID: Hi Bob I looked briefly at the VE7CC online instructions yesterday. Very impressive and extensive. Glad to hear it will talk to DXb. ?Do you leave the VE7CC program running along side DXb? ?Will DXb access it as if it were the node? David Sent from Samsung tablet -------- Original message -------- From: Bob Morrow Date: 18/09/2014 07:12 (GMT-05:00) To: 'David VE3VID' Subject: RE: [Dxbase] DX Clusters? I use VE7CC packet program and it will talk to DXbase2007. You can set what ever filters you want. -----Original Message----- From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of David VE3VID Sent: Tuesday, September 16, 2014 11:20 AM To: dxbase at mailman.qth.net Subject: [Dxbase] DX Clusters? Hi everyone I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. Is there any way to filter out the DX reports from stations on other continents? 73Davidhttp://www.ve3vid.webs.com/ ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From al9a at mtaonline.net Thu Sep 18 18:25:04 2014 From: al9a at mtaonline.net (Gary AL9A) Date: Thu, 18 Sep 2014 14:25:04 -0800 Subject: [Dxbase] DX Clusters? In-Reply-To: References: Message-ID: <553749D512814E0E9392FB9ED8986EEF@AL9APC> David, Yes, I leave the VE7CC CC User program running alongside DXb in another monitor. Once you have CC User installed and running click on the Settings tab and look toward the right side in the "Technical Stuff" box. There it says "Listening on Port 7300". To get DXb working with CC User you will probably need to modify your HOSTS file. Click on File/Modify Hosts File... and look at some of the entries in this file. Make note of the path where this HOSTS file is located on your system and copy down a couple of nodes and their position in the file. Now close the Edit Host File and go back to the Internet tab in User Options. In the IP Host window scroll down and verify that the nodes you saw in the HOSTS file are reflected here in the correct positions. This is to make sure you will be editing the correct HOSTS file on your computer. If you are sure you have found the correct HOSTS file go back to File/Modify Hosts File... and enter the following line in the file. 127.0.0.1:7300 #CCUSER The 127.0.0.1 directs DXb to listen use this local address on Port 7300, the same one CC User is listening to. Save the new addition to the HOSTS file and close it. Now go back to the Internet tab and in the IP Host window find the new line you just added to the file and click on it to select it. This is now the DX Cluster DXb will communicate with. Now in DXb go to Windows/New Internet Custer... and the Internet Cluster window will open and log onto whatever DX cluster you are connected to via CC User, in my case VE7CC-1. Now in the Internet CMDs toolbar click on an icon like SH/DX and your DX Info window will populate with all the recent spots seen by CC User on the DX Cluster you are connected to. As new spots are received they are shown in DXb provided they pass all the filters you have setup in both CC User and DXb. 73, Gary AL9A -----Original Message----- From: David VE3VID Sent: September 18, 2014 6:32 AM To: Bob Morrow ; dxbase at mailman.qth.net Subject: Re: [Dxbase] DX Clusters? Hi Bob I looked briefly at the VE7CC online instructions yesterday. Very impressive and extensive. Glad to hear it will talk to DXb. Do you leave the VE7CC program running along side DXb? Will DXb access it as if it were the node? David Sent from Samsung tablet -------- Original message -------- From: Bob Morrow Date: 18/09/2014 07:12 (GMT-05:00) To: 'David VE3VID' Subject: RE: [Dxbase] DX Clusters? I use VE7CC packet program and it will talk to DXbase2007. You can set what ever filters you want. -----Original Message----- From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of David VE3VID Sent: Tuesday, September 16, 2014 11:20 AM To: dxbase at mailman.qth.net Subject: [Dxbase] DX Clusters? Hi everyone I am wondering which is the preferred DX Cluster to use for DXbase?After getting v1.10 installed and running I set the cluster to Neil's K3NC. Is there any way to filter out the DX reports from stations on other continents? 73Davidhttp://www.ve3vid.webs.com/ ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From wa6axe at verizon.net Fri Sep 19 15:06:38 2014 From: wa6axe at verizon.net (Joe Glockner) Date: Fri, 19 Sep 2014 14:06:38 -0500 (CDT) Subject: [Dxbase] =?utf-8?q?Heads-up_on_upcoming_operations_as_VK9DLX_=28a?= =?utf-8?b?bWJpZ3VvdXMgcHJlZml4KeKAj+KAj+KAj+KAj+KAj+KAj+KAj+KAj+KAjw==?= =?utf-8?b?4oCP4oCP?= Message-ID: <25022106.2670935.1411153598506.JavaMail.root@vznit170182> From wa6axe at verizon.net Fri Sep 19 15:08:48 2014 From: wa6axe at verizon.net (Joe Glockner) Date: Fri, 19 Sep 2014 14:08:48 -0500 (CDT) Subject: [Dxbase] =?utf-8?q?Heads-up_on_upcoming_operations_as_VK9DLX_=28a?= =?utf-8?b?bWJpZ3VvdXMgcHJlZml4KeKAj+KAj+KAj+KAj+KAj+KAj+KAj+KAj+KAjw==?= =?utf-8?b?4oCP4oCP?= Message-ID: <200134.2671162.1411153728521.JavaMail.root@vznit170182> Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ... // VK9DLX // Just saw that the callsign VK9DLX from Lord Howe Island from about 5-22 October 2014. This callsign will default to Norfolk Island (VK9N) because of the Alias Map table mapping. This callsign is not currently MAPPED in the CALLMAP table -- so, if you want, simply make a dummy QSO with this callsign and change the PREFIX column of your logbook mdb file to VK9L and then when the pop-up asks you if you want to save this VK9DLX mapped to VK9L -- say YES/OK ---- Then delete that dummy QSO .. The CALLMAP table will now be updated in advance so that if you work this station -- it will have the correct PREFIX in your logbook QSO window ... 73 Joe WA6AXE From drmikeh at comcast.net Fri Sep 19 16:42:19 2014 From: drmikeh at comcast.net (Dr Michael Hunter) Date: Fri, 19 Sep 2014 15:42:19 -0500 Subject: [Dxbase] HamCall Message-ID: Moving from old XP to W 7 64 and having a problem with HamCall lookup in DxBase. I have tried in the data path : \HAM0\ (that is a zero), \HAM\0. I also tried the CDROM which is on the D drive with no luck. For some reason it can?t find the program. Any suggestions ? Mike K5HDU drmikeh at comcast.net --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com From drmikeh at comcast.net Mon Sep 22 16:52:09 2014 From: drmikeh at comcast.net (Dr Michael Hunter) Date: Mon, 22 Sep 2014 15:52:09 -0500 Subject: [Dxbase] Hamcall Problem Message-ID: Anyone on the list using Hamcall with DXbase ? I am having an issue getting DXbase to recognize HamCall. Mike K5HDU drmikeh at comcast.net From wa6axe at verizon.net Fri Sep 26 13:51:17 2014 From: wa6axe at verizon.net (Joe Glockner) Date: Fri, 26 Sep 2014 12:51:17 -0500 (CDT) Subject: [Dxbase] Joe wa6axe - HamCall (Buckmaster) -- a question for all DXbase users Message-ID: <32193628.294501.1411753877667.JavaMail.root@vznit170184> I am trying to help Mike on his problems with DXbase2007 and HamCall interface (lookups).. I ordered the HamCall CD and just rcvd it today .. I have attempted to install HamCall (as per Help File instructions) on my XP Machine and use it with DXbase2007 -- NO GO!! I have attempted to install HamCall (as per Help File instructions) on my Windows 7 64 bit Machine and use it with DXbase2007 -- NO GO!! HAS anyone ever tried to use the HamCall lookup interface -- AND either never got it to work correctly -- OR had success in using it ?? 73 Joe wa6axe