[Dxbase] Diamond DXCC printout?????

[Gary AL9A]

Ilya,

Here is how I do it.  When I work a new one for Diamond DXCC I enter it into 
the ARRL tracking spreadsheet and also type "Diamond DXCC" in the Notes 
field.  I then use the Wizard to output a Report and set a Filter to examine 
the Notes field for "Diamond DXCC.  From there I used one of the log format 
reports in DXB and print out the selected records.  A comparison of the ARRL 
tracking spreadsheet and the printed log report lets me verify that 
everything is in sync.

Once you're sure your Diamond DXCC records are complete you can use the 
Wizard again to produce an aidf file and then upload that file directly to 
the ARRL web site for your Diamond application.  Saves a lot of retyping and 
entry errors.

73,
Gary AL9A

----- Original Message ----- 
From: "ILYA ZOZIN, 4Z1UF" <4z1uf at bezeqint.net>
To: <dxbase at mailman.qth.net>; <dxbase at yahoogroups.com>
Sent: September 28, 2012 1:58 PM
Subject: [Dxbase] Diamond DXCC printout?????


>  Hello team,
> is the a way to configure Selection Wizard (or some special report)  to
> call out the QSO's for Diamond DXCC award?
> 73,
> Ilya 4Z1UF
>
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html