[Dxbase] wish list for new release

[Gary AL9A]

Apparently Don doesn't have his radio linked via CAT to the PC?  Dave is 
correct, when you have the radio and PC communicating together DXBase sets 
the USB or LSB from the radio VFO - no need to select SSB.  Having said 
that, I think eQSL gives me a error message when I upload an adi file from 
DXB because it wants to see SSB rather than USB or LSB.  But, as Dave says, 
SSB in not a "mode", at least as far as today's radios are concerned.

73,
Gary AL9A


----- Original Message ----- 
From: "Dave Gmail" <ve3wej at gmail.com>
To: "'DXBASE mail list'" <dxbase at mailman.qth.net>
Sent: November 10, 2012 1:18 PM
Subject: Re: [Dxbase] wish list for new release


> Just a note, radio control NEEDS to know whether you are qsying to usb or
> lsb, there is not a ssb mode on the radio, so I say keep it in there, 
> please
>
>
>
> Or add ssb as an option, that can be default mode selected
>
>
>
>
>
>
>
> "quoted"
> One of the things that irritate me is when I change modes from anything to
> SSB, I have to choose between USB and LSB.  That is really not necessary,
> because it does not matter!  SSB is SSB no matter weather it is USB or 
> LSB.
> This drop down could be eliminated and just have SSB.
> Don
> W0VM
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html