[Dxbase] Mass Enter Question

[Gary Rutledge]

Steve - not sure how many Q's your friend has entered in DXBase but 
their is a shortcut way I have found to edit a field without going 
through each one in the Previous QSO module.

Assuming they are all confirmed with a Card (choices in the dropdown are 
No, Card, LoTW, and Both), just go to the first record in the log, put 
your curser in the Cfm field and type a "c" for card - then just arrow 
down in the CFM field through each record typing a C - arrow down until 
completed.  Could also type a L for LoTW or B for Both.  Kind of a 
shortcut and beats using the Previous QSO module.  Might be a more 
efficient way - not sure.

Gary / KR8V

On 09/26/2011 6:20 PM, Crownhaven wrote:
> I talked a friend of mine into buying DXBase.  He had his daughter enter
> all of his cards.  It appears that she didn't indicate that they were
> confirmed contacts.  I'm not sure as I have never done this myself.  The
> Qs are all in the log but don't show up as confirmed.  Is there an easy
> way to make this Qs show up as confirmed vs. going through each one of
> them in the Previous QSO module which is the only way I know how to do
> it?????
>
> Regards,
>
> Steve, N4JQQ
>
> Thanks for your patience!
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>