[Dxbase] *NEW* Refdata/Logbook MDB Analyzer & Updater Ver 4.31 -Joe WA6AXE

[Gary AL9A]

Joe,

Well, I think I just got motivated to upgrade to DXB2007!  I started looking 
at the Russian prefix changes in earnest and quickly came to the conclusion 
that I would probably make a horrific mess of my refdata.mdb file by 
attempting manual changes myself.  So I guess now I'm trying to decide 
whether to upgrade to 2007 V1.08 and use your Checker/Updater program or 
wait for V1.09 to be released with the new refdata.mdb file.  I am leaning 
toward the later, but would like to check something first.

I have been working the All Asia CW DX contest this weekend and have quite a 
few RU contacts with the new prefixes.  If I import them into my current 
DXB2006 mdb and later upgrade to DXB2007 V1.09 will the data in my 2006 mdb 
file be updated to reflect the new prefix allocations or should I still 
download and run your Refdata/Logbook MDB Analyzer & Updater Ver 4.31?  I 
suspect the latter would be the case, but just wanted to check before I step 
off the edge.

73,
Gary AL9A

----- Original Message ----- 
From: "Joe WA6AXE" <wa6axe at hotmail.com>
To: <dxbase at yahoogroups.com>; <dxbase at mailman.qth.net>
Sent: June 12, 2011 9:14 PM
Subject: [Dxbase] *NEW* Refdata/Logbook MDB Analyzer & Updater Ver 4.31 -Joe 
WA6AXE


>
> GM All:
>
> For the DXbase2007 users -- I have just posted Version 4.31 of my
> Refdata/Logbook MDB Analyzer & Updater program to my Ham Radio
> website at:
>
> http://www.navycthistory.com/wa6axe/selection.html
>
>
> This is the same program as before - except that I have now included a
> CHECK/SAMPLING for the new Russian Prefixes/Callsigns, that we learned 
> about
> very recently.  There is an ADDITIONAL Colored Box in both the Alias Map 
> area
> and Call Map area of my program ..
>
> PSE be sure and read the instructions on the webpage that is LINKED
> to via my Selection webpage ... things changed just a bit ...
>
> FYI - I have given Neal the updated Refdata.mdb file - so that he will be 
> including
> it into Version 1.09 of DXbase2007..  So, The DXbase user can -- 
>
> (1) Wait until Version 1.09 is available from Neal
>
> (2) Download and run my Checker/Updater program (DXbase2007 only).
> NOTE!! -- your BACKUPS of your Refdata and logbook mdb files will be
> in your C:\JoesBackup  directory -- so that if you do not like what you 
> see --
> just revert to your Backups ...
>
> (3) Make "manual updates" to your own Refdata mdb file - using the info
> that has already been published on the DXbase Reflector .. You make the 
> updates
> and choices of what needs to be updated.  It is QUITE EXTENSIVE!!
>
> If you run into any problems while running the checker/updater of mine - 
> just send
> me a direct email ...
>
> The LINK for the webpage is the following words on selection.html webpage:
>
> Refdata/Logbook MDB Analyzer & Updater Ver 4.31
>
>          Refdata/Logbook MDB Analyzer & Updater program
>
>
>
> 73 Joe wa6axe
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html