[Dxbase] CONVERT TO ACCESS 2000

[Joe WA6AXE]

Bill,

Now I am wondering WHAT is going on --- you should NEVER this 
come up -- Bill -- if you would -- pse ZIP up your refdata.mdb file
and also ZIP up your Logbook mdb file and email BOTH of them to
me -- so that I can  RUN both of them against my program here
at my qth --- DXbase2007 is made under the MSJet that ACCESS97
uses -- and we ALWAYS MUST make very sure that we NEVER convert
any of our files to ACCESS2000 format --- let me check your
files here and see what is going on .... 

Joe 

> From: bparry at rgv.rr.com
> To: wa6axe at hotmail.com; w1rzf at verizon.net; dxbase at mailman.qth.net
> Subject: RE: [Dxbase] CONVERT TO ACCESS 2000
> Date: Thu, 10 Feb 2011 10:53:48 -0600
> 
> Joe,
> 
> I tried to use it this morning and it ask me the same thing.  I thought it
> was just my computer and decided to not chance the conversion.  I guess I
> did good!
> 
> Bill W5VX
> 
> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net]
> On Behalf Of Joe WA6AXE
> Sent: Thursday, February 10, 2011 10:45 AM
> To: w1rzf at verizon.net; dxbase at mailman.qth.net
> Subject: Re: [Dxbase] CONVERT TO ACCESS 2000
> Importance: High
> 
> 
> Art,
> 
> PSE restore your SAVED logbook.mdb file and your Refdata.mdb file --
> 
> We never CONVERT our mdb files into ACCESS 2000 format!!!!
> 
> I do not know why it would tell you that -- but, that
> is NOT what should be done --- 
> 
> What you can do, if you want ---
> 
> RESTORE your SAVED logbook mdb file and refdata mdb file
> so that you ARE OK there at ur qth --
> 
> then -- ZIP-up BOTH your logbook mdb file and your refdata.mdb file
> and send the ZIP file to me at this email address (reply to me directly) ..
> 
> I will check BOTH of them here at my QTH.
> 
> Joe wa6axe
> 
> > From: w1rzf at verizon.net
> > To: dxbase at mailman.qth.net
> > Date: Thu, 10 Feb 2011 11:27:43 -0500
> > Subject: [Dxbase] CONVERT TO ACCESS 2000
> > 
> > When trying the db checker, The program said that the file was created in
> an
> > earlier version of access and needed to be converted to 2000. I saved the
> > current database and ref files and then converted both to access 2000. The
> > program does not run. Was there more to do? I saved the updated files and
> > restored the original files and operating fine . any ideas. Thanks Art
> w1rzf
> > 
> > ______________________________________________________________
> > Dxbase mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dxbase at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>  		 	   		  
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>