[Dxbase] Can't Close DXBase 2007

[Neal Campbell]

Sri we missed it!

One other thing to make sure of is that you installed DXB109 into a
different directory than 107. If not, uninstall and do that,

The second thing to consider is whether you are actually running 109 instead
of 1,07 (or any other version). If you left the old version installed and
installed the new one, you can have shortcuts in the Start menu for both of
them. This means you could actually be running 107 instead of 109 (while the
ini file is geared to run from 109).

73

On Sun, Aug 28, 2011 at 2:34 PM, Joe WA6AXE <wa6axe at hotmail.com> wrote:

>
> When you install a new version of dxbase2007 - be sure that before you
> install it -- that
> you have either deleted your dxb2007.ini file or simply renamed it to
> something like
> dxb2007old.ini  ....  The NEWEST installer for Ver 1.09 is available at:
>
> http://www.abrohamnealsoftware.com/DXB2007_109.zip
>
>
> Neal is in the process of making another BETA Version INSTALLER for ver
> 1.09 --
> but, the problems you report WILL NOT occur with the program at the above
> LINK ..
>
> Biggest problem is that you might NOT have renamed the OLD dxb2007.ini file
> before you installed ...
>
> Joe wa6axe
>
> > Date: Sun, 28 Aug 2011 11:24:51 -0700
> > From: w1rh at yahoo.com
> > To: dxbase at mailman.qth.net
> > Subject: [Dxbase] Can't Close DXBase 2007
> >
> > This was posted a few days ago:
> >
> > Using Windows XP. I have updatet my DXbase 2007 from v. 1.07 to 1.09.
> Everything seems to work fine except for a problem to shut it down. When
> attempt to close down DXbase the following message appear: "Encountered an
> improper agrument".
> > The only way I am able to shut down my computer when DXbase 2007 is
> running is to shut down Windows first and then allow  DXbase to close. When
> starting up again I need to Initiate tabels as the program was not closed
> down properly.
> > Can anyone out there help me out.
> > 73
> > Finn Olav
> >
> >
> > I may have missed it, but I did not see any replies.  I just upgraded to
> 2007 and have exactly the same problem using XP.  I tried both versions 1.08
> and 1.09 and have the same problem with both.  DXBase 2006, which I have
> been using for years, is running fine on the same computer.
> >
> > I closed down all resident programs except my Avira antivirus program.
> >
> > Any ideas?
> >
> > Bob
> > W1RH
> > ______________________________________________________________
> > Dxbase mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dxbase at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Abroham Neal Software
www.abrohamnealsoftware.com
Work:(540) 645 5394
Mobile:(540) 645 8171