[Dxbase] Icom 706MKIIG rig interface

[Jack]

Hmmm, well since you are certain all the communications stuff was set right, 
maybe you have the wrong radio toggled ( radio 1 instead of 2 or vice 
versa ).  Really don't know so just a guess.

----- Original Message ----- 
From: "George Nicholson" <george at nicholsoncontracting.com>
To: "Jack" <lennoxj at bellsouth.net>; <Dxbase at mailman.qth.net>
Sent: Wednesday, March 10, 2010 8:49 AM
Subject: RE: [Dxbase] Icom 706MKIIG rig interface


I have tried various combinations of the handshake settings ----

George Nicholson, Jr.
-----Original Message-----
From: Jack [mailto:lennoxj at bellsouth.net]
Sent: Wednesday, March 10, 2010 6:59 AM
To: George Nicholson; Dxbase at mailman.qth.net
Subject: Re: [Dxbase] Icom 706MKIIG rig interface

George,

I've not seen any mention of how you set the port handshaking options in

DXbase for cdt, dtr, etc....  Perhaps you don't have those set for that
radio's needs.  Usually dtr can be left unchecked and the others checked
but
maybe someone with that radio working can tell you the correct settings.

Just a thought.  As long as you have the DXbase options set to agree
with
the radio, there really isn't much else to it.

Jack

----- Original Message ----- 
From: "George Nicholson" <george at nicholsoncontracting.com>
To: <Dxbase at mailman.qth.net>
Sent: Monday, March 08, 2010 11:03 PM
Subject: [Dxbase] Icom 706MKIIG rig interface


>I have an Icom 706 MKIIG that I cannot get DxBase to read frequency? I
> am able to use Writelog and Ham Radio Deluxe with the ICOM on same
> computer.
>
>
>
> The DXBase is trying to read the radio as it takes a long time to
change
> lines when I hit enter but no frequency readings.
>
>
>
> I have DXBase set to Radio 1, comport 1,  19200, n, 8, 2. This works
in
> Writelog and also Ham Radio Deluxe. I am using a USB interface and a
> virtual comport.
>
>
>
> Any suggestions?
>
>
>
> N4GRN George Nicholson Jr
>
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>