[Dxbase] Possible Bug or Corrupted File?

[D. Drake]

I've been using DXB2007 since it was released with few problems and most of 
them were pilot error.  I just noticed some strange behavior with the 
Summary window. I'm not sure if it's a bug or if I have a file corrupted 
causing the problem.

Here's what's happening - In the Summary window with the VHF-GRIDS category 
selected I noticed the SPath and LPath headings are displayed without tenths 
of degrees, unlike other categories, except CQ-Zones, that display tenths of 
degrees. When I mouse click on the SPath or LPath values to turn the rotor 
the rotor either doesn't turn or turns to the wrong heading.  Other 
categories all seem to work as expected.

Rotor settings are, type HYG-DCU1, initialize AP1, turn rotor # ; AM1; , 
stop rotor AS1; , Character is selected, Use leading zeros in degrees is 
checked, Use delay is not checked. The rotor interface is an Idiom Press to 
a Yaesu G-2800DXA.

Is anyone else seeing any similar behavior?

If this is likely due to a corrupted program file any ideas which file? ( I 
really don't want to reinstall DXB and find it still happens if I can avoid 
it!)


73,

Dale AA1QD