[Dxbase] Selective QSL Printing?????

[Gary AL9A]

Yes.  Go to the Selection Wizard and click on the QSO Filters button.  Make 
sure all boxes on the filter screen are unchecked.  Then check Band=30 and 
Confirm=None.  Click on OK to return to the first screen.  Set the Output 
Type box to Labels and check the "Test only" box.  Click on Start and watch 
how many QSO Labels DXB would print with this set of filters.  If the result 
seems logical uncheck the "Test only" box and click the Start button again. 
This time DXB will put all the QSO labels matching the filter limits in the 
Pending QSO's file for you to print the labels.

73,
Gary AL9A



----- Original Message ----- 
From: "Steve Rutledge" <gatorman71 at bellsouth.net>
To: "DXBase Reflector" <dxbase at mailman.qth.net>
Sent: January 03, 2010 4:40 PM
Subject: [Dxbase] Selective QSL Printing?????


> Is there a way to select all unconfirmed 30 meter cards and print labels
> for those QSOs??????
>
> I know I could search my entire log and mark them but I'm looking for
> the easy way out.
>
> Regards,
>
> Steve, N4JQQ
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html