[Dxbase] printing on the back of QSL cards

[Peter Dougherty]

I have two clean and nice-looking templates setup for direct-printing on the
backs of standard-size cards if anybody wants them; one is for 12-Qs and the
other is for 6. I'll be happy to e-mail them to anybody who wants them.

Neal, may I suggest an online file repository for folks to upload their own
labels, reports, etc, to store them in one place?

-----------------------------------

Regards,

Peter,
W2IRT


-----Original Message-----
From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net]
On Behalf Of Tom
Sent: Friday, October 16, 2009 1:15 PM
To: dxbase
Subject: [Dxbase] printing on the back of QSL cards

Printing on the back of QSL cards, I do this all the time. Assuming there
are Labels to be printed from confirmed QSOs, Go to output/User Designed
Labels, In select Label Type, select QSO Labels and 3, 6 or 9
QSOs per label. Make sure the Label Group and the operators Callsign is
correct. Click OK.  Now select crdback3.lbl, or the 6 or 9 version. Now
click okay. That should give you labels that can be printed on the back of
the card.  I did have to use the Tools/Design Labels first to set the font
before using this.

73 Tom, N4TL



______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html