[Dxbase] Found a bug

[Neal Campbell]

Hi Peter

As I am going thru the code I will look and see if I notice anything that
would cause this.

73
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911

Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to cases at dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/

DX Cluster: dxc.k3nc.com port 23





On Mon, Oct 5, 2009 at 1:15 AM, Peter Dougherty <w2irt at verizon.net> wrote:

> Hi all,
>
> This one's been vexing me for years now and I'm hoping it's not just a case
> of user-error.
>
> Scenario: Options/Alerts: Global Category Filter set to "New Mode or New
> Band," and RTTY and Digital lookups are merged. RTTY is checked for every
> band I operate in the Individual Band/Mode Filter. I do not operate PSK or
> any other digital mode, just pure FSK RTTY.
>
> In Band Plan Mapping, RTTY is set as the digital mode as appropriate
> (14073-14149, 21073-21199 and others).
>
> A needed RTTY spot (new RTTY for an entity) comes on the cluster. If it has
> nothing in the comments field it triggers normally. If "RTTY" is present
> anywhere in the comments field of the incoming spot, DX Base ignores the
> spot altogether and just passes the spot off as unneeded. This is
> repeatable
> on all 3 of my machines. I've missed far too many RTTY entities as a
> result,
> and would appreciate any suggestions on how to remedy this.
>
> Thanks in advance.
>
> -----------------------------------
>
> Regards,
>
> Peter,
> W2IRT
>
>
>
>