[Dxbase] K3?

[Brendan Minish]

On Sat, 2009-10-03 at 07:29 +0200, Fred Handscombe wrote:
> Hello Guys
> 
> Is there a change I can make to radios.ini, or elsewhere, so that when I click a spot DXBase to send the K3 to the DX  
> frequency but it uses CW REV?  Currently it uses CW even if the radio was already in CW REV.

Sure. 
the software sets the mode based on the value it has for that mode in
the radios.ini file 
If you add the attached file onto the end of your radios.ini file (back
it up first and remove the k3 entry if you already have it in there) you
will have 2 entries for the k3 K3 and K3R 

K3R should do what you want  K3 uses CW instead of CW Rev

let me know if it's not working as expected 

-- 
73
Brendan EI6IZ 
-------------- next part --------------

[ELECRAFT_K3]
#Elecraft K2 revision 0.2 by Brendan Minish ei6iz.brendan at gmail.com
P_LSB=1
P_USB=2
P_CW_USB=0
P_CW_LSB=0
P_AM=5
P_FM=4
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=6
P_RTTY=6
P_PACKET=9
P_CWR=3

LSB=1
USB=2
CW=3
FM=4
AM=5
FSK=6
RTTY=6
CWR=7
HIGH=3
MEDIUM=2
LOW=1
OFF=0
ON=1

FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
PACING=0

DefaultCW=3
DefaultAM=5
DefaultFSK=6
DefaultRTTY=6
DefaultFM=4
DefaultCWR=3

SelectVFOA= eoc(0)
SetVFOA=asc( "FR0;" ) asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1) asc ( ";" ) eoc(0)
GetVFOA= asc("FA;") rrs(14) eoc(0)
PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)

SelectVFOB= eoc(0)
SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
GetVFOB= asc("FB;") rrs(14) eoc(0)
PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)

SetMode= eoc(0)
GetMode= asc( "IF;" ) rrs(38) eoc(0)
PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0)

SetFilter= eoc(0)
GetFilter= asc("K31;") asc( "FW;" ) eoc(0)
PrsFilter= asc("FW")  dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)

SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
GetSplit= asc( "IF;" ) rrs(38) eoc(0)
PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0)

[ELECRAFT_K3R
#Elecraft K2 revision 0.2 by Brendan Minish ei6iz.brendan at gmail.com
P_LSB=1
P_USB=2
P_CW_USB=0
P_CW_LSB=0
P_AM=5
P_FM=4
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=7
P_FSK=6
P_RTTY=6
P_PACKET=9
P_CWR=3

LSB=1
USB=2
CW=7
FM=4
AM=5
FSK=6
RTTY=6
CWR=3
HIGH=3
MEDIUM=2
LOW=1
OFF=0
ON=1

FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
PACING=0

DefaultCW=7
DefaultAM=5
DefaultFSK=6
DefaultRTTY=6
DefaultFM=4
DefaultCWR=3

SelectVFOA= eoc(0)
SetVFOA=asc( "FR0;" ) asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1) asc ( ";" ) eoc(0)
GetVFOA= asc("FA;") rrs(14) eoc(0)
PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)

SelectVFOB= eoc(0)
SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
GetVFOB= asc("FB;") rrs(14) eoc(0)
PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)

SetMode= eoc(0)
GetMode= asc( "IF;" ) rrs(38) eoc(0)
PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0)

SetFilter= eoc(0)
GetFilter= asc("K31;") asc( "FW;" ) eoc(0)
PrsFilter= asc("FW")  dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)

SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
GetSplit= asc( "IF;" ) rrs(38) eoc(0)
PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0)