[Dxbase] AXETTY frequency help needed

[Gary AL9A]

I've just downloaded and configured Joe's AXETTY program for use with 
DXB2006.  After a couple of minor glitches everything seems to be running 
well.  I can receive and copy RTTY off the air and can transmit FSK with the 
Microkeyer II and get a test QSO from AXETTY to load into DXB.  The only 
problem I can't seem to resolve is the frequency field in AXETTY is not 
picking up the radio frequency.  Thus when I log a QSO from AXETTY to DXB 
the frequency info is missing.  I've cleared the check box in AXETTY General 
Settings to send the frequency to the logger, but the problem is there is no 
frequency info being read from the radio to send to the logger.

I had a similar problem when first setting up MMTTY - no frequency being 
displayed in MMTTY.  With help from Joe, W4TV, I was able to get the 
frequency readout in MMTTY to work by configuring Com7 in the router to 2nd 
CAT and then setting Com7 as the Port in the MMTTY TX/Radio Command button. 
I am using the MMTTY router configuration with AXETTY and as noted 
everything works except getting the radio frequency into AXETTY.

Is anyone out there using AXETTY with the Microham router that is getting 
the frequency info to display correctly?  If so, what is the secret?

73,
Gary AL9A