[Dxbase] DXBase 2000 .mdb logs to .adi LoTW

[FireBrick]

Here is how I do it.
your mileage may vary
1. Select the Wizard
2.In Output Type, Select ADIF File
(that should be only field enabled unless your selecting a different Opr 
Call
3. Select QSO Filter and either make a filter so you only get CW or whatever
or enable "No LOTW Submitted".
4. Click OK
5. Click Start
A window will open asking you what folder you wish to save this .adi file in
and
A file name you wish to save it as.
(I choose something like W9OL.adi) "original ain't I?"
(I created a special Folder for the files I wish to upload called: 
"DXB2LoTW"
and I save W9OL.adi there, it will overwrite a previously save submission 
file)
Or you can add a sequential number to the file, your choice.
6. It asks if you wish to mark each qso selected as having been LoTW 
submitted.
(I say yes)
let it rip....

Of course you must then go to TQSL and prepare the .adi file for upload.
Make sure, that if you have multiple callsigns that you select qsos for that 
callsign only, and also in the correct time frame for each callsign.
You need a sepearate certificate for each callsign/time frame.

good luck and thanks for the reminder.
I just copied the instructions while performing that upload selection.

Hope this helps.



----- Original Message ----- 
From: <K4YYL at aol.com>
To: <dxbase at mailman.qth.net>
Sent: Friday, March 27, 2009 2:21 PM
Subject: [Dxbase] DXBase 2000 .mdb logs to .adi LoTW


> Finally going to try putting logs into LoTW as files. Been using the 
> Wizard
> to create reports but not finding the reports much less the correct .adi 
> file
> type. I need LoTW/DXBase "101" help for DXBase 2000 files .mdb   Are 
> conversion
> programs available to convert these files to .adi? If so, where/what? How
> does one locate the "report" file generated by DXBase Wizard? There is 
> never a
> request for a file name.
>
> Thanks.
> Art, K4YYL
>
>
> **************
> Feeling the pinch at the grocery store?  Make dinner
> for $10 or less. 
> (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000001)
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html