[Dxbase] Re: Multiple time printing same labels

[Garth Hamilton]

There is an easier way and that is to go to print Preview with the 
group of labels or QSLs you want to print. It is the second choice in 
the drop down window and selecting the design and list you want to 
print. Once the group of labels or QSLs is up on the screen scan 
through them until you reach the one you want to print twice and 
click the left hand printer icon on the top the menu bar at the top 
and it will print then click it again and it will print one label or 
QSL of the one showing in the preview window. IF you click the right 
hand printer icon it will print one copy of everything in the file 
for printing.

I do this all the time as I print and check against the cards I am answering.

73 VE3HO Garth

At 04:06 AM 1/21/2008, you wrote:
>Message: 8
>Date: Sun, 20 Jan 2008 14:01:19 -0500
>From: "Eric - VE3GSI" <ve3gsi at sympatico.ca>
>Subject: RE: [Dxbase] Multiple time printing same labels
>To: "'ILYA ZOZIN 4Z1UF'" <4Z1UF at isdn.net.il>,   <dxbase at mailman.qth.net>
>Message-ID: <BAYC1-PASMTP159FDA16CC3FF83C6B5617EC3C0 at CEZ.ICE>
>Content-Type: text/plain;       charset="us-ascii"
>
>
>Hi Ilya,
>
>I don't use labels, but I have done multiple printing on a single QSL card
>many times without problems. I would suspect the steps are the same. First I
>make sure the Label Data Wizard is empty, then from the main log I simple
>mark the card I wish to print and print the card. When the dialogue box
>comes to asks if I wish to update my QSL Card sent information I answer no.
>The card then prints as normal.
>
>I have also done the above with address labels with no problems so again I
>would suspect labels will work the same.
>
>73 Eric..