[Dxbase] No Current Record

[ve3wej gmail]

aznd dont forget to re initialize.....



VE3WEJ
Dave Garber

10-X # 23465
echolink # 52852
irlp node 2202
email ve3wej at rac.ca
----- Original Message ----- 
From: "Jack" <jack at dxbase.com>
To: "K3SEW" <k3sew at comcast.net>; "DXbase Post" <Dxbase at mailman.qth.net>
Sent: Friday, April 11, 2008 11:12 AM
Subject: Re: [Dxbase] No Current Record


> Ron,
>
> Well, if you reinstalled and then when u run DXbase, you get this message, 
> then it means that you didn't get a "good" install.  This is most always 
> related to hardware trouble on your machine that causes this sort of thing 
> especially hard drive glitches.  Nevertheless, to correct things I would 
> do the following:
>
> Make sure you have your QSO database saved on your drive in a folder 
> outside of DXbase.
>
> 1.  from control panel add/remove programs, remove DXbase in its entirety.
> 2.  Using Windows Explorer, delete the DXbase 2006 folder and eveything in 
> it.
> 3.  Using Windows Explorer, delete the dxb2006.ini file in the Windows 
> folder.
> 4.  Reboot and turn off ALL other running programs especially antivirus 
> stuff.
> 5.  Run scandisk or other utility to check your hard drive and if ok, 
> then:
> 6.  Install DXbase 2006.
> 7.  Reboot.
> 8.  import your old QSO database into the new one.
>
> I don't know if you have obtained a new machine recently, but if you are 
> using the same machine that you've had for past five or so months, then 
> the types of problems you have reported over those months lead me to think 
> you have some pretty significant hardware issues going on in that machine.
>
> Regards,
> Jack
>
> ----- Original Message ----- 
> From: "K3SEW" <k3sew at comcast.net>
> To: "DXbase Post" <Dxbase at mailman.qth.net>
> Sent: Friday, April 11, 2008 9:32 AM
> Subject: [Dxbase] No Current Record
>
>
> What does the pop up messgae "No Current Record" mean?
>
> I recently re-installed DXbase 2006. When I try to close the program or 
> when i attempt to Initilize Tables I get this pop up mesgae.
>
> How should I correct this problem?
>
> TNX,
>
> Ron
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net