[Dxbase] Green Heron rotor controller issue...

[Al Bailey]

Jim you are the man. That took care of it and it is working now 100%...

Thanks a BUNCH and you deserve a nice Fathers Day.



At 09:30 PM 6/16/2007, James Samuels wrote:
>Al,
>The default DXBase settings for DCU1 commands must be altered a bit.
>See my settings in this rotor options screen shot in the
>attached .doc file.  I had to play with it for awhile to get it to
>work here.
>73, Jim, W3BG
>
>
>
>
>Content-Type: application/octet-stream;
>         x-unix-mode=0700;
>         name=Green Heron Settings in DXBase.doc
>Content-Disposition: attachment;
>         filename="Green Heron Settings in DXBase.doc"
>
>
>
>
>On Jun 16, 2007, at 11:35 AM, Al Bailey wrote:
>
>>Good Morning,
>>         I have a couple Green Heron RT-20 rotor controllers and they both
>>work FB using both Writelog and the LP Rotor program.  LP Rotor is
>>a free program by Larry at Telepost.  Both programs work flawlessly.
>>         DXBase on the other hand is giving me fits despite some help from
>>K5LC. I have done different variations of the recommended setup but
>>they still neither one work. I can get them to turn using one setup
>>BUT not to the correct heading and they do not know the stop command.
>>         Anybody else out there with these controllers that can give me
>>some pointers ?
>>
>>         I am using XP and the controllers are on a PCI to USB adapter on
>>ports 5 and 6. The fact that they work with two programs but not
>>DXB tells me it is not a hardware issue.
>>
>>         Thanks in advance for any help. I will be gone a good portion of
>>Saturday but will reply ASAP...
>>
>>______________________________________________________________
>>Dxbase mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Dxbase at mailman.qth.net
>