[Dxbase] Using Vista

[Robert Bonner]

There we go Karl, I hadn't printed out the procedure.

BOB DD 
---------- Original Message ----------------------------------
From: "Karl Geng" <n1dl at bizswfla.rr.com>
Date:  Fri, 8 Jun 2007 09:27:36 -0400

>Rick,
>I posted this on March 5th --- hope it helps you --- Karl N1DL
>
>snip ...
>problem: DXBase cannot find the key and therefore stays in Trial mode.
>
>solution:
>
>The software cannot handle the automatic placement of the key in both the 32
>bit and the 64 bit registry.
>Therefore it is necessary to make a modification to the 64 bit registry in
>VISTA 64.
>BACK UP THE REGISTRY FIRST !
>
>1) go the system prompt
>2) click on "start search" and type in regedit and do a "enter"
>3) go to HKEY_LOCAL_MACHINE and click on it
>4) find the folder "Wow6432Node" and in it place a new folder "Scientific
>Solutions" and into this one another " Dxb2007"
>5) in that folder create a new entry called "Key"  (you will have to rename
>the new key#1 into Key)
>6) go under HKEY_LOCAL_MACHINE to the existing 32 bit folder that says
>Scientific Solutions and under Key copy the text string associated with it,
>7) go back to the new folder created in the Wow6432Node as Key and past the
>text value into it.
>8) close the registry
>
>Restart DXbase2007 and it will work.
>
>73 de Karl N1DL
>
>
>----- Original Message ----- 
>From: "Jack" <jack at dxbase.com>
>To: <dxbase at mailman.qth.net>
>Sent: Thursday, June 07, 2007 10:39 PM
>Subject: [Dxbase] Using Vista
>
>
>> Please reply to Rick or the reflector.  Thanks.
>>
>> DXBaser's:
>>
>> I had to purchase a new HP desktop computer that only came equipped with 
>> Microsoft Vista (unfortunately).  I am having difficulty installing the 
>> registration key so that DXBase recognizes it.  I would appreciate any 
>> comments or suggestions to help me fix my problem which is explained 
>> below. I have reviewed past reflector postings but I am not sure I have 
>> seen this exact problem.
>>
>> After I installed the "trial copy of DXBase 2007", I attempted to install 
>> the registration code I received from Jack via email.  I sent this 
>> registration code via email from my old XP computer to the new computer 
>> having Vista installed on it. When I click on the registration code to 
>> install it on the Vista computer, I get a splash screen message saying:
>>
>>                                This file does not have a program 
>> associated with it for performing this action.
>>                                Create an association in the Set 
>> Association control panel.
>>
>> Has anyone experienced this and found a fix for it.  I am not sure where 
>> the Set Association control is located on Vista or how to set it if it 
>> exists. I would appreciate any suggestions or solutions.
>>
>>
>> Rick Kourey (K4KL)
>> Marvin/Charlotte, NC
>> rkourey at carolina.rr.com
>>
>>
>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dxbase at mailman.qth.net
>> 
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>
 




________________________________________________________________
Sent via the WebMail system at qro.com