[Dxbase] Start Sequence

[Jack]

Larry,

Nice idea but unfortunately we don't know ( in software ) whether you 
intentionally left your radio turned off or you didn't.  All we know in 
software is that you have said we should activate a radio interface.  If you 
have it set to activate a radio, then we do that.  If the radio is not 
turned on, then obviously we cannot establish communications with it and so 
we disable that interface and produce an error message because we assume 
something is not working with your interface.  If we left the radio 
interface activated even though we couldn't communicate with it, then we 
would be producing countless error messages every time we needed to query 
the radio.

Regards,
Jack


----- Original Message ----- 
From: "Larry - K2GN" <k2gn at comcast.net>
To: "Michael Hatzakis Jr MD" <lists at hatzakis.net>; <dxbase at mailman.qth.net>
Sent: Monday, January 15, 2007 1:39 PM
Subject: Re: [Dxbase] Start Sequence


> That's the option that DXbase turns off.  Then I have to turn it on.
> Thanks, but not a fix.
> de K2GN
>
>
> From: "Michael Hatzakis Jr MD" <lists at hatzakis.net>
> To: "'Larry - K2GN'" <k2gn at comcast.net>; <dxbase at mailman.qth.net>
> Sent: Monday, January 15, 2007 11:39 AM
> Subject: RE: [Dxbase] Start Sequence
>
>
>> Tools --> Options --> User Options --> Radio 1 --> Uncheck Turn On HF 
>> Radio
>> Serial Interface.
>>
>> Same with CW.
>>
>> Michael
>>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>