[Dxbase] QSL card Layout and printing via DXbase

[Paul Cassel]

So why not share with the list how to change the layout :)

Paul

> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net 
> [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Joseph Glockner
> Sent: February 17, 2007 10:41 PM
> To: Wayne Jones
> Cc: 'DXBase'
> Subject: Re: [Dxbase] QSL card Layout and printing via DXbase
> 
> 
> Wayne,
> 
> As are just about all of the cards.. but, that is not
> what Mike was concerned about. The concern was "within
> the DXbase Label Designer Module" - Mike wanted
> to be able to layout the card "horizontally" - but, have
> it print vertically in the printer.
> 
> NO Problem now .. He has been able to do what he wanted.
> 
> Joe wa6axe
> 
> 
> Wayne Jones wrote:
> 
> > 90% of the cards received at the Hawaii bureau are 
> horizontal -- and 
> > not just my own!  I am the bureau manager for the Hawaii 
> Bureau (KH6) 
> > and the vast majority of the cards I sort are horizontal.
> > 
> > 
> > Aloha
> > Wayne, NH6K
> > 
> > -----Original Message-----
> > From: dxbase-bounces at mailman.qth.net 
> > [mailto:dxbase-bounces at mailman.qth.net]
> > On Behalf Of Joseph Glockner
> > Sent: Saturday, February 17, 2007 2:33 PM
> > To: ve3wej gmail
> > Cc: DXBase
> > Subject: Re: [Dxbase] QSL card Layout and printing via DXbase
> > 
> > He was talking about printing on his Pre-Made QSL card.. but, the 
> > biggie here is that he wanted to design with the longest side being 
> > left-to-right, vice the "normal" vertical format.. Mike has already 
> > done his card all ok now..
> > 
> > 73 Joe wa6axe
> > 
> > 
> > ve3wej gmail wrote:
> > 
> > 
> >>I print directly to a dxbase  created qsl, is this what he means, or
> >>is he talking about printing over top of a pre made qsl
> >>----- Original Message ----- From: "Joseph Glockner" 
> >><jglock2 at airmail.net>
> >>To: "DXBase Reflector" <dxbase at mailman.qth.net>
> >>Sent: Saturday, February 17, 2007 5:41 PM
> >>Subject: [Dxbase] QSL card Layout and printing via DXbase
> >>
> >>
> >>
> >>>Some of you may have seen Mike's (K3MH) email about 
> printing directly
> >>>to a QSL card - but not having the layout the normal 
> vertical layout 
> >>>(in the label designer module).
> >>>
> >>>Since I have never needed to do what he wanted to do, I have
> >>>experimented with the designer and found that YES - it can be done.
> >>>
> >>>Just FYI.
> >>>
> >>>73 Joe wa6axe
> >>>
> >>>______________________________________________________________
> >>>Dxbase mailing list
> >>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
> >>>Help: http://mailman.qth.net/mmfaq.htm
> >>>Post: mailto:Dxbase at mailman.qth.net
> >>
> >>
> >>______________________________________________________________
> >>Dxbase mailing list
> >>Home: http://mailman.qth.net/mailman/listinfo/dxbase
> >>Help: http://mailman.qth.net/mmfaq.htm
> >>Post: mailto:Dxbase at mailman.qth.net
> >>
> >>
> >>
> > 
> > ______________________________________________________________
> > Dxbase mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dxbase at mailman.qth.net
> > 
> > 
> > 
> > 
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>