[Dxbase] QSL card Layout and printing via DXbase

[jim]

Hi Folks..

    Joe helped me out with my set up to print the report right onto my 
cards.. I use the envelope slot on my HP 920 and it did take 3 or 4 tries to 
get everything into place and matched up to my front report cards... You are 
correct in saying these guys do a wonderful job... I have had Joe help me on 
several different projects and he has come through every time... I have 
never met him face to face but I feel I know him better than some / a lot of 
the guys locally - can't say enough good things...
    Hope nothing blows up from all the internal pressure..

                                                                             
                                                                    Jim 
VE3CM - VE3KUC at xplornet.com

----- Original Message ----- 
From: "Michael Hatzakis Jr MD" <lists at hatzakis.net>
To: "'ve3wej gmail'" <ve3wej at gmail.com>; "'DXBase'" <dxbase at mailman.qth.net>
Sent: Saturday, February 17, 2007 7:18 PM
Subject: RE: [Dxbase] QSL card Layout and printing via DXbase


> Hi VE3WEJ
>
> <<<I print directly to a dxbase  created qsl, is this what he means,
> <<<or is he talking about printing over top of a pre made qsl
>
> I have nice QSL cards from a while back, but used to use labels to stick 
> on
> the fields.  Too much trouble.  So, I am making a QSL card "Label" in 
> DXbase
> with only the fields filled in so I just need to keep a stack of cards in 
> my
> photo printer and I can print the fields right onto the QSL cards I 
> already
> have.
>
> The orientation is a little tricky, but with Joe's help, I think I have it
> figured out.  These guys, Joe & Jack at DXBase are awesome.  Been with
> DXBase since 98 version and cannot say enough good about them...
>
> Michael  K3MH
>
> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net 
> [mailto:dxbase-bounces at mailman.qth.net]
> On Behalf Of ve3wej gmail
> Sent: Saturday, February 17, 2007 3:58 PM
> To: DXBase
> Subject: Re: [Dxbase] QSL card Layout and printing via DXbase
>
> I print directly to a dxbase  created qsl, is this what he means, or is he
> talking about printing over top of a pre made qsl
> ----- Original Message ----- 
> From: "Joseph Glockner" <jglock2 at airmail.net>
> To: "DXBase Reflector" <dxbase at mailman.qth.net>
> Sent: Saturday, February 17, 2007 5:41 PM
> Subject: [Dxbase] QSL card Layout and printing via DXbase
>
>
>> Some of you may have seen Mike's (K3MH) email about
>> printing directly to a QSL card - but not having
>> the layout the normal vertical layout (in the label
>> designer module).
>>
>> Since I have never needed to do what he wanted to do,
>> I have experimented with the designer and found that
>> YES - it can be done.
>>
>> Just FYI.
>>
>> 73 Joe wa6axe
>>
>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dxbase at mailman.qth.net
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>