[Dxbase] Indicated Antenna Heading

[Tim Heger]

Mine works fine without the "+" in front of the numbers.  But putting a "-" 
in front of them sure gives the wrong headings.

73, Tim - N3XX

----- Original Message ----- 
From: "Jim, K8FT" <k8ft at comcast.net>
To: <dxbase at mailman.qth.net>
Sent: Friday, April 20, 2007 1:56 PM
Subject: RE: [Dxbase] Indicated Antenna Heading


> If you're N latitude & W longitude make sure you have a + in front of both
> numbers.
>
> Jim, K8FT
>
> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net 
> [mailto:dxbase-bounces at mailman.qth.net]
> On Behalf Of Martin Hankins
> Sent: Thursday, April 19, 2007 5:17 PM
> To: dxbase at mailman.qth.net
> Subject: [Dxbase] Indicated Antenna Heading
>
> I have recently reinstalled DXBase 2007 and have rechecked several times 
> to
> be sure I accurately placed my latitude and longitude in QTH LOCATION;
> however, the correct heading for each country are reversed. That is Short
> Path indicated is really Long Path and the indicated Long Path is really
> the Short Path. What could possibly cause this?
>
> Any help would be greatly appreciated.
>
> Martin, W5HTY
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net