[Dxbase] DXBase and IC-7800

[David Gynn]

Mike

I have the same equipment plus a Steppir Beam and had similar 
problems to you and I must say it took some time to get the system to work.

What I have done is use the RS-232 input on the 7800 as the 
connection to the computer and therefore Dxbase and then linked the 
PW-1 and Steppir from the CI-V socket on the 7800.

This works consistently now but as you said it has to be at 4800.

Hope this works out

Dave
(G3SBP)




At 20:39 21/07/2006, you wrote:
>Anyone out there using the 7800 and PW-1 with DXBase?  In DXBase, 
>under Tools/Options/Radio 1, I am using 4800 baud and I have the 
>7800 set to automatic.  However, this combination doesn't always 
>work when I click on a spot - sometimes the 7800 goes to that spot 
>and sometimes it doesn't.  Is anyone using a different combination 
>that works almost all of the time?
>
>73,
>Mike, W4UM (ex-K4KUZ)
>South Florida DX Association - www.qsl.net/k4fk
>Mid Florida DX Association - www.w4fdx.com
>Florida Contest Group - www.floridacontestgroup.org
>
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net