[Dxbase] DXCC Request Help

[FireBrick]

Sir...just to clarify and make sure.
Which version of DXBase do you have.
2005 or the latest version that came out last May, 2006.

Because there is a difference in how the selecting qsls for submission works.


----- Original Message ----- 
From: "Merle Bone" <merlebone at charter.net>
To: <dxbase at mailman.qth.net>
Sent: Wednesday, February 22, 2006 3:52 PM
Subject: [Dxbase] DXCC Request Help


I am in the process of making up a DXCC request form and card pack. I used DXBase 2005 to 
originally select my cards and LOTW contacts - which worked fine. After the first 
selection sheets were made I picked out the cards. Then I used the numbering facility in 
DXBase to number the contacts that I wanted to use on each of the multiple contact cards 
(I did not number the contacts I didn't want to use). Then I re-ran the DXCC form program. 
Now the multi-contact-card contacts are listed on the back sheet of the DXCC request form 
but those contacts, which were moved to the back, have been replaced with new contacts 
from the log in the original places on the sheets. The contact count from the DXCC program 
is 379 but the contact count total on the new sheets is now 401.

Can some one help me understand what I am doing incorrectly?
Thanks,
Merle - W0EWM
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net