[Dxbase] ft 2000

[Sergei UX1UA]

Yes, Ray,

Thank you, it helped. I have changed menu 28 to a value of 100 in FT2000
and the pacing to a value of 15 in the section of FT2000 in radios.ini
in DXB. It works fine now. 

Kind regards and 73! de Sergei UX1UA aka UV5U, EN1U
ux1ua at qsl.net Logs and photos at www.qsl.net/ux1ua  



> -----Original Message-----
> From: dxbase-bounces+ux1ua=qsl.net at mailman.qth.net 
> [mailto:dxbase-bounces+ux1ua=qsl.net at mailman.qth.net] On 
> Behalf Of Dxhogg at aol.com
> Sent: Wednesday, 13 December, 2006 2:31
> To: dxbase at mailman.qth.net
> Subject: [Dxbase] ft 2000
> 
> 
> the ini file works well with the ft 2000  you must set in  
> menu  28 in the 
> radio  to a value of 100  and the pacing in the  ft 2000 
> radio ini in dxbase 
> root dir file to a value of 15     73  ray  nr1r
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>