[Dxbase] Odd Problem with the DXBase Utility Program

[John Pelham]

I have the problem also.  I have DXbase 2007 installed on two PCs (one 
install is an upgrade from 2005; the other is new).  There is no text 
with the vertical row of icons on the left side (that's what we're 
talking about, right?) on either PC.  I just assumed it was normally 
that way.  Font size and DPI setting is set to normal on both computers. 
There's no text with the icons set to either small or large.

73, W1JA

John Pelham
Web site  http://www.radiophile.com

----- Original Message ----- 
From: "Eric - VE3GSI" <ve3gsi at sympatico.ca>
To: <martinsan at mchsi.com>; <dxbase at mailman.qth.net>
Sent: Tuesday, August 22, 2006 11:33 AM
Subject: RE: [Dxbase] Odd Problem with the DXBase Utility Program


Hi Marty,
'
The Dxbutility that comes with DXB07 here is fine, that is the 
'clipboard
icon' has "Introduction" below it etc... I can also right click an icon 
and
change the size too and still have text.

I suspect the following might fix your problem. You may have a 
non-standard
system font selected in your screen settings, or a non-standard DPI. To 
fix
this, right-click on the Desktop, click on Properties in the popup menu, 
and
make sure that FontSize is set to Normal on the Appearance tab. Then 
switch
to the Settings tab, click on the Advanced button and set DPI Setting =
Normal Size.

Hope this helps,
Eric - VE3GSI


-----Original Message-----

When I initiate the DXBase utility program a vertical row of icons is 
shown
on
the left hand side of the window.  A text description used to be shown 
below

each icon.  The line of text has mysteriously disappeared.  Is there a 
fix??

Marty W9EAA

______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net