[Dxbase] QSL SENT

[FireBrick]

Interesting, I do it almost the opposite. I click on the appropriate QSL VIA item.

When I send out cards, I have it already set for the various 'groups'
each group is a different qsl via method.

So when I print out buro cards, the group is B (Tools>Options>User Options>Labels.
Manager is M
Manager$ is $

etc.
so when I mark a card for qsling...it goes to the appropriate group and is printed in that 
batch.


----- Original Message ----- 
From: "Peter Dougherty" <w2irt at comcast.net>
To: "K3SEW" <K3SEW at suscom.net>; "DxBase Reflector" <Dxbase at mailman.qth.net>
Sent: Monday, August 07, 2006 4:05 PM
Subject: Re: [Dxbase] QSL SENT


> At 04:01 PM 08/07/2006, K3SEW wrote:
>>Is there a way in DxBase 2006 to record that a QSL was SENT via Air or  Surface Mail 
>>with $1 or an IRC. Other than in the NOTES column?
>
> What I do is keep a separate physical logbook. I run a printout from a report that Joe 
> has made available which correlates addresses with callsigns/managers. I write beside 
> each one my method, then 3-hole punch each sheet and I keep them all in a binder. Works 
> pretty well but it's a 2-step lookup.
>
> Within DX Base there is the QSL VIA field. You choices there are None, Bureau, Direct, 
> Direct $$, Manager, Other, Mrg-Buro, Manager $$. To be honest, I never use that function 
> becuase I usually send out batches of cards and some go one way, some go another, and 
> that's just a lot of clicking.
>
>
>
> Cheers,
>
> Peter,
> W2IRT
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net