[Dxbase] Logging Digital Sats

[Joseph Glockner]

Phil,

For the acceptable TQSL Modes in your ADI file -- open you
TQSL program and go to File / Create New ADIF file / ...
Now, go to the Mode "drop-down" window .. there, you will see
the acceptable TQSL modes ... "if" your MODE column of DXbase
doesn't show one of those "acceptable" TQSL Modes - then, you
will have to go into the following in your TQSL program:

File / Preferences / ADIF Modes TAB /

In that area is where you will tell the TQSL program how to
"Map" the existing MODES you have in DXbase Mode column to
an "acceptable" TQSL Mode ..

Such as:

LSB -> SSB

since LSB is not an acceptable mode for TQSL ... there is
an area in your TQSL program with a good HELP File ..

Hpe that this helps out.

73 Joe wa6axe

Phil Paulhus wrote:

> Hi,
> 
> I have started to log some satellite contacts.  When creating a ADIF file to submitt to LOTW the following error message is displayed:
> 
>             Signing using CALL=K1ICO, DXCC=291
>             Error: Invalid MODE (DIGITAL) on line 24
>             CALL: KA1OLE
>             QSO_DATE: 20050327
>             TIME_ON: 155400
>             FREQ: 0.14580
>             BAND: 2M
>             SAT_NAME: ISS
>             PROP_MODE: SAT
>             MODE: DIGITAL
> 
> In this case SAT = ISS, Mode = Digital, Submode = blank.
> 
>             Error: Invalid MODE (APRS) on line 30
>             CALL: KB9LTH
>             QSO_DATE: 20050516
>             TIME_ON: 003221
>             FREQ: 0.14580
>             BAND: 2M
>             SAT_NAME: ISS
>             PROP_MODE: SAT
>             MODE: APRS
> 
> In this case Sat = ISS, Mode = Digital, Submode = APRS.
> 
> What are the proper entries for these fields?  
> 
> 73 Phil k1ico
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>