[Dxbase] Interfacing IC746pro

[John]

Josh's advice to Charlie helped me as well.  Thanks for passing it along
Charlie.

John, KB2COP


-----Original Message-----
From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net]
On Behalf Of jtuel at everestkc.net
Sent: Thursday, March 03, 2005 1:45 AM
To: Charlie
Cc: dxbase at mailman.qth.net; Milos Rankovic
Subject: Re: [Dxbase] Interfacing IC746pro

yes... What charlie said :)

73 de KB0GUS

----- Original Message -----
From: Charlie <ad5th at direcway.com>
Date: Wednesday, March 2, 2005 10:54 pm
Subject: Re: [Dxbase] Interfacing IC746pro

> Josh helped me get going and maybe I can return the favor by 
> helping you. 
> Here is what Josh sent me. It involved editing the radio.ini file 
> for the 
> 746 (not pro)
> 
> -----------------
> > For radio 1, I have Icom 746 set.
> >
> > Com 1 9600 8 word length none parity and  1 stop bit
> >
> > I also have RTS High checked because my cable uses RTS for power.
> >
> > In your RADIO.INI file for dx base, you need to change the 
> address of the
> > radio to Address=0x66 because the 746 and 746 pro use different
> > addresses...
> >
> --------------
> 
> Charlie
> Ham Radio - AD5TH
> www.ad5th.com
> Live Blues Music
> www.492acousticblues.com
> 
> 
> 
> 
> ----- Original Message ----- 
> From: "Milos Rankovic" <milosr at sympatico.ca>
> To: <dxbase at mailman.qth.net>
> Sent: Wednesday, March 02, 2005 9:33 PM
> Subject: [Dxbase] Interfacing IC746pro
> 
> 
> > Hello guys,
> >
> > I am trying to establish communication between 746pro and DXbase 
> (2003)> but without success. If I use other program, like 
> Commander it works
> > great. I set same parameters in Dxbase (speed, start/stop bits.) but
> > nothing. Any suggestion would be more than helpful.
> >
> > 73, Milos
> >
> >
> > ______________________________________________________________
> > Dxbase mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: Dxbase at mailman.qth.net 
> 
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: Dxbase at mailman.qth.net
> 

______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net