[Dxbase] PSK 31 Assistance

[Joseph Glockner]

Ronald,

 From the HELP files - the following should be done to resolve your
problem:


//quote//


DxbPSK Performed Illegal Operation

If you attempt to run the DxbPSK program and receive an error message 
before the program boots up that says DxbPSK attempted to perform an 
illegal operation, it probably means that the WinPSKX.DLL file did not 
get registered properly during our installation.  You can register the 
file yourself by following these steps:

Locate the file called regsvr32.exe that will be located in your 
Windows/System folder on Win95/98/ME.  On NT and Win2000 it is located 
in your WinNT/System32 folder.  Copy regsvr32.exe into your DXbase folder.

Open a command box ( sometimes called a DOS box ) and using the standard 
MSDOS command for change directory, perform a CD to the full path of 
your DXbase folder.  At the DOS prompt in your DXbase folder, type the 
following command:

Regsvr32 WinPSKX.dll     ( note there is one space between the 2 and the 
W ).

You should see a message that indicates that the file was successfully 
registered.

Now, you can try to run the DxbPSK program again.  If you continue to 
have the same problem, then there is some other problem.

Copyright ©1999 - 2004 Scientific Solutions, Inc.


//unquote//


73 Joe wa6axe
Ronald Ford wrote:
> I'm having trouble getting DXbase DxbPSK program to run...I receive a 
> message"unsupported operation was attempted".  I was able to use this 
> feature under the old release...can anyone assist???  I'm running DXbase 
> 2006 with Windows XP...thanks in advance...
> 
> Ronald J. Ford
> 129 Peach Orchard Drive
> Benson, NC 27504
> 919-894-8707
> w4rjf at arrl.net
> Amateur Radio Call W4RJF
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>