[Dxbase] Re: Initialize Tables Problem

[Joseph Young]

WA9YSD wrote:

> Hi Joe
>  
> I will try to talk you throught the simple stuff and see if you done 
> your home work. 
>  
> Did you do a search for the call sign 3D2AG in your log?  You use the 
> Summary and do just a search for the call sign.  Do you know how to do 
> a call sign search?  Push the LOCK button so spots do not change you 
> search.  type in the call sign your looking for 3D2AG and push enter.  
> Then click on the little binoculars in the bottom center of the 
> window.  When your window pops up under QSO Field highlight Callsign 
> in blue click on the FIND button.  Look on the top at all the calls 
> and bands and modes.  look carefully cause you may have entered 
> somthing wrong.  After the corrections haave been made. Start at the 
> top, highlight each line in bule and push on the SAVE button on each 
> highligted line in blue.  If you do not save the line you made 
> corrections on  Your problem will keep comming up.
>  
> If this does not work, you may have to record each log entry number 
> for that call sign go into just the LOG find that log number, delete 
> that entry, and reenter all the data fro that call.
>  
> It might be a UHF band entry instead say 160M or the program excepted 
> a bad date.
>  
> Keep The Faith, Jim

  Hi Jim,


All the log entries are correct. Only recently did the program start 
flagging errors on QSO's that
it had no  problem with before. I have backups of the log so I think I 
will just re-install
DXBASE 2006  and go on from there. Thanks for your help.

73 de Joe, W6RLL