[Dxbase] TIME Stamp

[Kamar]

 To not change a date/time that you entered when saving a QSO (i.e.,
entering past log's data), you have to turn off the automatic time/date
update.  You get to this with the following:

Click Tools/Options/User Options
Click the Log Defaults tab
In the lower right hand corner, make sure that the box option 'Change
Date/Time when saving QSO' is unchecked.   Click your change.  Close Dxbase
and reopen Dxbase (this last step is a habit).

Ron....NU1U

-----Original Message-----
From: dxbase-bounces+kamar=inr.net at mailman.qth.net
[mailto:dxbase-bounces+kamar=inr.net at mailman.qth.net] On Behalf Of
royalct at inr.net
Sent: Monday, September 13, 2004 13:09
To: WA9YSD; DXbse Forum
Subject: Re: [Dxbase] TIME Stamp

Jim,

I am at work and don't have Dxbase 2005 on the work computer (darn, I'm
suppose to work).  If you look up in Dxbase Help menu, you will find a user
set up option to do exactly what you are asking for...it is designed
in....you just have to engage it.


Ron .... NU1U

----- Original Message Follows -----
From: "WA9YSD" <wa9ysd at att.net>
To: "DXbse Forum" <dxbase at mailman.qth.net>
Subject: [Dxbase] TIME Stamp
Date: Mon, 13 Sep 2004 12:15:37 +0100

> Thanks to all who helped me with DXbase 2005.
> 
> I may be missing something or not doing something right again.  But 
> this is what I would like to see happen with DXbase 2005.
> 
> Can some one please design software or update for DXBase so a person 
> can put the log table in an arcive mode so when you enter a new line 
> of data that the starting point is at the time stamp!  Entering data 
> from paper log books or old qsl cards that were never enter one must 
> go back to the time and change it.  Gets anoying.
> 
> Jim
> __________________________________________________________
> ____ Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net