[Dxbase] RAC and DXBase2005

[Bill NS4C]

I think RAC\ should be in the CDROM data path box.

Good luck,

Bill  NS4C

-----Original Message-----
From: dxbase-bounces at mailman.qth.net
[mailto:dxbase-bounces at mailman.qth.net]On Behalf Of FireBrick
Sent: Wednesday, June 02, 2004 2:20 PM
To: DXBase List
Cc: GOLIST
Subject: [Dxbase] RAC and DXBase2005


Ok Guys, I've previously use HamCall.
I would install it to C drive.

Now I just got the RAC.
I used the setup program to install to my hard drive.
The program will run and find callsigns and addresses.

But from DXBase2005, I get a Not Found, RAC Error 3

In Options I made sure I had CDCDROM as C, a \ in the CDROM Data Path Box
and RAC! in the CDROM Type box.

Checkmarks in both Activate and Auto Screen Lookups.


Windows XP, plenty of hard drive, memory etc.
DXBAse2005 and the new  RAC Summer 2004 CDROM

(John, jewel case was crushed, but cdrom survived ok and installed with no
problem)


-----------------------------------------------------
The most expensive component always breaks first.
-----------------------------------------------------

Bill H. in Chicagoland


_______________________________________________
Dxbase mailing list
Dxbase at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dxbase