[Dxbase] Corrections that each DXbase user needs to make to their US States database

[Al Bailey]

Thanks for the info Joe and Bob. I changed mine, and don't forget to backup 
everything once
it's done. :) :)





At 09:04 AM 7/5/2004, Joseph Glockner wrote:
>To all:
>
>There are 3 corrections that need to be made in your US States
>database. It was found that 3 entries have the wrong ITU zone.
>
>Each user can manually make the needed updates as follows:
>
>1.  From the main menu, select  Tools/Database Access/States and 
>Counties.   Select US State tab.  Scrolldown to each of the
>States needing updates and perform the following:
>
>** Locate Hawaii   and change the ITU Zone from  06  to  61
>
>** Locate Louisiana   and change the ITU Zone from  08  to  07
>
>** Locate Michigan   and change the ITU Zone from  07  to  08
>
>
>Tnx to Bob K8VFV for finding the errors!
>
>
>73 Joe wa6axe
>
>_______________________________________________
>Dxbase mailing list
>Dxbase at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dxbase