[DXBase] Address Labels

Wed, 30 Apr 2003 20:41:04 -0400

I have tried both "Use DXBase" and "Use Callbook" but no luck.
I just went to DXBase 2003 and it works fine on the same QSO's
Then I went back to DXBase 2004 and it doesn't work so then I went to the
Options menu and found that there was not a check in the box to activate the
CD Callbook, put a check in the box and now it works so problem solved.
Thanks for the replies.

73 de Tony,  KD4K

My Weather Page
http://home.adelphia.net/~tonycash/
My Ham Radio Page
http://home.adelphia.net/~tonycash/kd4k/radio.html
Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page
http://home.adelphia.net/~tonycash/sawnee/index.html

----- Original Message ----- 
From: "Jack" <[email protected]>
To: "FireBrick" <[email protected]>; "Tony Cash" <[email protected]>;
"dxbase" <[email protected]>
Sent: Wednesday, April 30, 2003 5:40 PM
Subject: Re: [DXBase] Address Labels

> When you click on a log entry, but then click the address label save, the
> info that it is trying to save comes from the QSL info window.  Most
likely
> you have something like Use DXbase marked in QSL info and there is no
DXbase
> address displayed... so you get the error that it cannot be zero length
> because there is nothing in the address window.
>
> Regards,
> Jack
>
> ----- Original Message ----- 
> From: "FireBrick" <[email protected]>
> To: "Tony Cash" <[email protected]>; "dxbase" <[email protected]>
> Sent: Wednesday, April 30, 2003 5:31 PM
> Subject: Re: [DXBase] Address Labels
>
>
> > Are you talking about qsl mailing address labels or
> > Return Address labels?
> >
> > I've printed a few address labels since getting 2004 and had
> > no problems.
> >
> >
> > ----- Original Message ----- 
> > From: "Tony Cash" <[email protected]>
> > To: "dxbase" <[email protected]>
> > Sent: Wednesday, April 30, 2003 4:12 PM
> > Subject: [DXBase] Address Labels
> >
> >
> > > Today I was trying to make some address labels and found that no
matter
> > what
> > > log entry that I click on I get an error message "Field 'ADRLAB.ADR1
> can't
> > > be a zero-length string". I must be missing something because this
> worked
> > in
> > > DXBase 2003, I am using DXBase 2004 now.
> > >
> > > 73 de Tony,  KD4K
> > >
> > > My Weather Page
> > > http://home.adelphia.net/~tonycash/
> > > My Ham Radio Page
> > > http://home.adelphia.net/~tonycash/kd4k/radio.html
> > > Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page
> > > http://home.adelphia.net/~tonycash/sawnee/index.html
> > >
> > >
> > > _______________________________________________
> > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > - - - - - - - - - - - - - - - - - - - - - - -
> > > To UNSUBSCRIBE please visit:
> > > http://mailman.qth.net/mailman/listinfo/dxbase
> > >
> > >
> >
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
>
>
>