[DXBase] '03 to '04 imported database

[Jack]

If you get a message during import that says "error" then the record was not
imported.  So, when you got 100 percent dupes, none of the dupes were
loaded.

Regards,
Jack

----- Original Message ----- 
From: "George Harlem, W1EBI" <w1ebi@lightband.com>
To: "'DXBase Reflector'" <dxbase@mailman.qth.net>
Sent: Sunday, June 08, 2003 7:20 PM
Subject: [DXBase] '03 to '04 imported database


> Jack/Courtney, I did my first import from DXB2003 to DXB2004.  I have
> ten records out of 5,351 from my old W3CMN callsign in the 1950's, the
> rest are W1EBI (have to cover the deleteds).  I chose "W3CMN" under
> Operator Callsign for the import, and all 5,351 records were imported.
> The Operator Callsign is shown correctly for all records.  I expected
> only the first ten records would be imported, then the remaining 5,341
> with the current call.  A second import with "W1EBI" in the Op. Callsign
> box produced 100% dupe errors.  Duh.  Is this a bug, did I do this
> right, or is my DXB2004 .mdb hosed?  It all LOOKS correct on the screen.
>
> George
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase