[DXBase] unsubscribe
jose bonilla
[email protected]
Sun, 6 Jul 2003 19:39:21 -0400
=20
PSE UNSUBSCRIBE ME. TNX & 73
-----Original Message-----=20
From: [email protected] =
[mailto:[email protected]]=20
Sent: Sun 06/07/2003 07:10 PM=20
To: [email protected]=20
Cc:=20
Subject: DXBase digest, Vol 4 #184 - 14 msgs
=09
=09
Send DXBase mailing list submissions to
[email protected]
=09
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dxbase
or, via email, send a message with subject or body 'help' to
[email protected]
=09
You can reach the person managing the list at
[email protected]
=09
When replying, please edit your Subject line so it is more specific
than "Re: Contents of DXBase digest..."
=09
=09
--- This is the DXBase Digest ---
=09
Today's Topics:
=09
1. 60M logging (Ed Parish K1EP)
2. Re: 60M logging (FireBrick)
3. Re: Basics of submitting LoTW (FireBrick)
4. can anyone duplicate this problem (FireBrick)
5. Yaesu FT1000MP pacing (FireBrick)
6. Packet spots ([email protected])
7. Re: Packet spots (Jack)
8. Re: 60m Logging (Ed Parish K1EP)
9. Re: can anyone duplicate this problem (Sergei Litvinov)
10. Re: 60m Logging (Jack)
11. RE: 60M logging (Bill Nowicki [WA4OYH])
12. RE: 60m Logging (Richard Solomon, W1KSZ)
13. Backup (Steve Smith)
14. Re: 60m Logging (Jim McDonald)
=09
--__--__--
=09
Message: 1
Reply-To: [email protected]
Date: Sun, 06 Jul 2003 08:22:55 -0400
To: [email protected], [email protected],
"Jack" <[email protected]>, [email protected]
From: Ed Parish K1EP <[email protected]>
Subject: [DXBase] 60M logging
=09
How do you log a contact on 60M in DxBase2004?
=09
=09
=09
=09
--__--__--
=09
Message: 2
Reply-To: "FireBrick" <[email protected]>
From: "FireBrick" <[email protected]>
To: <[email protected]>, "DXBase List" <[email protected]>
Subject: Re: [DXBase] 60M logging
Date: Sun, 6 Jul 2003 07:32:21 -0500
=09
You put the callsign in the callsign field, hit enter, and if your =
radio is
connected to the computer it will log the frequency.
Then I put "60 meters" into the Notes field.
=09
I have no knowledge if DXB crew will put out a downloadable update or =
wait
till next version.
=09
----- Original Message -----
From: "Ed Parish K1EP" <[email protected]>
To: <[email protected]>; <[email protected]>; "Jack"
<[email protected]>; <[email protected]>
Sent: Sunday, July 06, 2003 7:22 AM
Subject: [DXBase] 60M logging
=09
=09
> How do you log a contact on 60M in DxBase2004?
>
>
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>
>
=09
=09
--__--__--
=09
Message: 3
Reply-To: "FireBrick" <[email protected]>
From: "FireBrick" <[email protected]>
To: <[email protected]>, "DXBase List" <[email protected]>
Subject: Re: [DXBase] Basics of submitting LoTW
Date: Sun, 6 Jul 2003 08:36:31 -0500
=09
When the LoTW goes live big time.
I believe we will all have to resubmit and do it all over again.
=09
But once that happens, you will only need to update.
I've experimented with that now.
Using the wizard I now tell it to create the .adi FILE with qso's > =
then the
last update date.
Sometimes that is 10 qso's, usually less.
It appends the update to your existing qso/qsl list.
=09
I'm pretty sure the system will remain that way. Most logical way of =
doing
it. Shorter upload times etc.
=09
Now remember, if you have a log with a callsign other than what your
presently using such as I do. WN9VOL, WA9VOL and now W9OL, you must =
submit a
certification and separate log for each callsign.
As my previous callsigns were prior to the 1998 date, I have not been =
able
to submit for a certification or the logs as yet.
=09
So it is important to make sure that the timeframe for qso's and =
Operator
call are correct.
Wizard will allow you to select qso's based on the operator call.
=09
----- Original Message -----
From: "Robert Morrow Jr." <[email protected]>
To: "FireBrick" <[email protected]>
Sent: Sunday, July 06, 2003 8:03 AM
Subject: Re: [DXBase] Basics of submitting LoTW
=09
=09
> Thanks for the LOTW info. I tried it and worked the first time. The
> only think I don't know is when this goes live, will you just add the
> new contacts to the log or will you just keep updating with the old
> plus the new contacts?
>
> Anyway thanks it went well
>
>
> 73's
> Bob, K9MIE
> Spring Valley, IL
>
> FireBrick wrote:
> > Yes that is my understand. That everything will be erased and we =
will be
> > required to resubmit.
> > But this is a beta procedure.
> > I was urging DXB users to try the beta test for a couple of =
reasons.
> > One, the more who test, the more likely to find a well hidden =
problem.
> > Two, When the system goes official, people won't be asking..."How =
do we
do
> > this?".
> >
> > I've learned a lot of little things by constantly updating my log =
to
LoTW.
> > I've even found a couple of things that the ARRL crew are looking =
at.
> >
> >
> > ----- Original Message -----
> > From: "Ed Magnuson" <[email protected]>
> > To: "FireBrick" <[email protected]>; <[email protected]>; "DXBase =
List"
> > <[email protected]>
> > Sent: Friday, July 04, 2003 8:10 AM
> > Subject: Re: [DXBase] Basics of submitting LoTW
> >
> >
> >
> >>Thanks for the detailed info on how to join the beta testing
> >>of LoTW. But am I correct in assuming that any confirmations
> >>found in this process will not result in credit for DXCC?
> >>Won't the confirmations be erased when the live launch of
> >>LoTW begins? Or am I misunderstanding the ARRL explanation
> >>of this test period?
> >>---------------------------------------------------
> >>Ed, W1MAG
> >>No. 1 DXCC Honor Roll (Mixed)
> >>
> >>
> >>
> >>
> >
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> >
> >
> >
>
>
> --
> 73's
>
> Bob & Carol K9MIE
>
>
>
=09
=09
--__--__--
=09
Message: 4
Reply-To: "FireBrick" <[email protected]>
From: "FireBrick" <[email protected]>
To: "DXBase List" <[email protected]>
Date: Sun, 6 Jul 2003 08:43:59 -0500
Subject: [DXBase] can anyone duplicate this problem
=09
While preparing my logs for LoTW I ran into a little problem.
=09
My log previously had W9OL as the Operator Callsign.
As I knew the dates for the start/end of my previous callsigns,
I went to the first date and tried a Search/Replace from the edit =
option.
If I did each replace manually by hitting 'Replace' it worked properly =
and
went to the next instance.
If I chose, 'Replace All', DXB would crash.
No data was damaged or lost, I just had to restart DXB.
=09
I then tried this with a dummy log file.
If there were just a few number of whatever I chose to replace it would =
work
properly with the 'Replace All' feature.
If there were a great number of instances, it would crash every time.
=09
This could be complicated by the fact that I have Office 2000 installed =
on
this computer.
DXB2004 still uses the ACCESS98 Jet engine I think.
=09
=09
It would be interesting to see if anyone can duplicate this or if it's =
just
my system.
=09
=09
=09
-----------------------------------------------------
It's hard to be nostalgic when you can't remember anything.
-----------------------------------------------------
=09
W9OL, Bill H. in Chicagoland
=09
=09
--__--__--
=09
Message: 5
Reply-To: "FireBrick" <[email protected]>
From: "FireBrick" <[email protected]>
To: "DXBase List" <[email protected]>
Date: Sun, 6 Jul 2003 11:46:59 -0500
Subject: [DXBase] Yaesu FT1000MP pacing
=09
With this new computer, I'm getting a bit of "Radio not responding, do =
you
wish to cancel etc. "
when I click on a spot.
=09
I have parameters for Yaesu set as I did with previous computers.
=09
Seems I remember someone saying to change the 'pacing' figure in the
radios.ini.
Is this the same as 'polling the radio'?
What figure do you suggest?
=09
=09
-----------------------------------------------------
You need a Lifestyle change if: Your kids take a siphon hose to show =
and
tell in school.
-----------------------------------------------------
=09
W9OL, Bill H. in Chicagoland
=09
=09
--__--__--
=09
Message: 6
From: [email protected]
Date: Sun, 06 Jul 2003 12:18:07 -0600
To: DX-Base Reflector <[email protected]>
Subject: [DXBase] Packet spots
=09
Hi all,
=09
I have been a big fan for years of DX Monitor. It has 3 very neat
features and I am wondering if they are available in the packet portion
of DXBase.=20
The first is highlighing the time on recent spots (30 Minutes)in one
color (red). The second is highlighting spots that originate within a
user defined radius from the home QTH in Blue. The third is
highlighting calls of a predefined list in red if they show up.
The colors wouldn't matter so long as they could be different than the
standard black.
=09
These three features allow you at a glance to see what you are likely
able to hear and work.
=09
I know that DXBase has the ability to do a voice announcement when
spots come in but after turning it on to announc just what I need on
10,15,20,40, and 80, I can't get her to shut up!! I have turned all
the announcements off but she happily announces each spot! A visual
indicator, rather than audio would allow me to turn my speakers back
on!!
=09
Thanks
Don - VE6ZT
=09
-------------
Don Carlgren
VE6ZT
=09
=09
--__--__--
=09
Message: 7
From: "Jack" <[email protected]>
To: <[email protected]>,
"DX-Base Reflector" <[email protected]>
Subject: Re: [DXBase] Packet spots
Date: Sun, 6 Jul 2003 15:04:50 -0400
=09
Don,
=09
You either need a lot of countries, or you have some options set up =
wrong.
Check out options for alerts, vhf and internet spots. Read the help =
file
for a description of what each option means and set accordingly.
=09
Regards,
Courtney
=09
----- Original Message -----
From: <[email protected]>
To: "DX-Base Reflector" <[email protected]>
Sent: Sunday, July 06, 2003 2:18 PM
Subject: [DXBase] Packet spots
=09
=09
> Hi all,
>
> I have been a big fan for years of DX Monitor. It has 3 very neat
> features and I am wondering if they are available in the packet =
portion
> of DXBase.
> The first is highlighing the time on recent spots (30 Minutes)in one
> color (red). The second is highlighting spots that originate within =
a
> user defined radius from the home QTH in Blue. The third is
> highlighting calls of a predefined list in red if they show up.
> The colors wouldn't matter so long as they could be different than =
the
> standard black.
>
> These three features allow you at a glance to see what you are likely
> able to hear and work.
>
> I know that DXBase has the ability to do a voice announcement when
> spots come in but after turning it on to announc just what I need on
> 10,15,20,40, and 80, I can't get her to shut up!! I have turned all
> the announcements off but she happily announces each spot! A visual
> indicator, rather than audio would allow me to turn my speakers back
> on!!
>
> Thanks
> Don - VE6ZT
>
> -------------
> Don Carlgren
> VE6ZT
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>
=09
=09
=09
--__--__--
=09
Message: 8
Reply-To: [email protected]
Date: Sun, 06 Jul 2003 16:00:57 -0400
To: <[email protected]>
From: Ed Parish K1EP <[email protected]>
Subject: Re: [DXBase] 60m Logging
=09
Yes, but it says 75GHz. So, do we need an update to get it to say 60M?
=09
At 03:59 PM 7/3/03 -0400, Art Searle wrote:
>Hi All,
>
>Gee I don't understand what's goin' on here. I logged a contact on 60
>meters. It took the frequency but the band says 75 meters, not 60 =
meters.
>I have the latest version of DXBase too. Has anyone else experienced =
this
>logging problem. :-)
>
>73,
>
>Art
>W2NRA
>
>_______________________________________________
>DXBase Reflector - Please visit us on the web at www.dxbase.com
>- - - - - - - - - - - - - - - - - - - - - - -
>To UNSUBSCRIBE please visit:
>http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
=09
--__--__--
=09
Message: 9
From: "Sergei Litvinov" <[email protected]>
To: "FireBrick" <[email protected]>,
"DXBase List" <[email protected]>
Subject: Re: [DXBase] can anyone duplicate this problem
Date: Sun, 6 Jul 2003 23:28:15 +0300
=09
It was the same behavior of DXB2004 when I was doing big number of =
"Replace
to All" even in some other columns. But this has happened to me only =
with
DXB2004 and had never before when DXB2003.
=09
Regards & 73 de Sergei
UX1UA aka UV5U, EN1U
[email protected]
www.qsl.netux1ua
WRTC '00, '02 photos, OI2HQ photos, UV5U logs and more...
=09
----- Original Message -----
From: "FireBrick" <[email protected]>
To: "DXBase List" <[email protected]>
Sent: Sunday, July 06, 2003 4:43 PM
Subject: [DXBase] can anyone duplicate this problem
=09
=09
> While preparing my logs for LoTW I ran into a little problem.
>
> My log previously had W9OL as the Operator Callsign.
> As I knew the dates for the start/end of my previous callsigns,
> I went to the first date and tried a Search/Replace from the edit =
option.
> If I did each replace manually by hitting 'Replace' it worked =
properly and
> went to the next instance.
> If I chose, 'Replace All', DXB would crash.
> No data was damaged or lost, I just had to restart DXB.
>
> I then tried this with a dummy log file.
> If there were just a few number of whatever I chose to replace it =
would
work
> properly with the 'Replace All' feature.
> If there were a great number of instances, it would crash every time.
>
> This could be complicated by the fact that I have Office 2000 =
installed on
> this computer.
> DXB2004 still uses the ACCESS98 Jet engine I think.
>
>
> It would be interesting to see if anyone can duplicate this or if =
it's
just
> my system.
>
>
>
> -----------------------------------------------------
> It's hard to be nostalgic when you can't remember anything.
> -----------------------------------------------------
>
> W9OL, Bill H. in Chicagoland
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>
=09
=09
--__--__--
=09
Message: 10
From: "Jack" <[email protected]>
To: <[email protected]>, <[email protected]>
Subject: Re: [DXBase] 60m Logging
Date: Sun, 6 Jul 2003 17:01:42 -0400
=09
The 60 mtr was not around when the latest version of DXbase was =
released.
It is therefore not a supported band at the present. It also is not =
valid
for any awards pending review by the various award sponsers. In order =
to
get the Qs into your log, it will be necessary to pick one of the bands =
that
you don't use and select that. You can also make a special entry into =
one
of the special fields or one of the user check box entries. This would =
let
you identify the 60mtr Qs in your log for the time being.
=09
Regards,
Jack
=09
=09
=09
----- Original Message -----
From: "Ed Parish K1EP" <[email protected]>
To: <[email protected]>
Sent: Sunday, July 06, 2003 4:00 PM
Subject: Re: [DXBase] 60m Logging
=09
=09
> Yes, but it says 75GHz. So, do we need an update to get it to say =
60M?
>
> At 03:59 PM 7/3/03 -0400, Art Searle wrote:
> >Hi All,
> >
> >Gee I don't understand what's goin' on here. I logged a contact on =
60
> >meters. It took the frequency but the band says 75 meters, not 60
meters.
> >I have the latest version of DXBase too. Has anyone else =
experienced
this
> >logging problem. :-)
> >
> >73,
> >
> >Art
> >W2NRA
> >
> >_______________________________________________
> >DXBase Reflector - Please visit us on the web at www.dxbase.com
> >- - - - - - - - - - - - - - - - - - - - - - -
> >To UNSUBSCRIBE please visit:
> >http://mailman.qth.net/mailman/listinfo/dxbase
>
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
=09
--__--__--
=09
Message: 11
From: "Bill Nowicki [WA4OYH]" <[email protected]>
To: "DXBase List" <[email protected]>,
"Tony Cash [KD4K]" <[email protected]>
Subject: RE: [DXBase] 60M logging
Date: Sun, 6 Jul 2003 17:14:49 -0400
=09
I would encourage Scientific Solutions to develop a patch so that =
DXBase
2004 would handle 60 meters. It is a long time before the next version =
comes
out.
=09
73 Bill WA4OYH
=09
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of FireBrick
Sent: Sunday, July 06, 2003 8:32 AM
To: [email protected]; DXBase List
Subject: Re: [DXBase] 60M logging
=09
=09
You put the callsign in the callsign field, hit enter, and if your =
radio is
connected to the computer it will log the frequency.
Then I put "60 meters" into the Notes field.
=09
I have no knowledge if DXB crew will put out a downloadable update or =
wait
till next version.
=09
----- Original Message -----
From: "Ed Parish K1EP" <[email protected]>
To: <[email protected]>; <[email protected]>; "Jack"
<[email protected]>; <[email protected]>
Sent: Sunday, July 06, 2003 7:22 AM
Subject: [DXBase] 60M logging
=09
=09
> How do you log a contact on 60M in DxBase2004?
>
>
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>
>
=09
_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - -
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
=09
--__--__--
=09
Message: 12
From: "Richard Solomon, W1KSZ" <[email protected]>
To: <[email protected]>, <[email protected]>
Subject: RE: [DXBase] 60m Logging
Date: Sun, 6 Jul 2003 18:18:36 -0400
=09
My copy of DXBase logs it as 5650 MHz !!
=09
73, Dick, W1KSZ
=09
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ed Parish K1EP
Sent: Sunday, July 06, 2003 4:01 PM
To: [email protected]
Subject: Re: [DXBase] 60m Logging
=09
=09
Yes, but it says 75GHz. So, do we need an update to get it to say 60M?
=09
At 03:59 PM 7/3/03 -0400, Art Searle wrote:
>Hi All,
>
>Gee I don't understand what's goin' on here. I logged a contact on 60
>meters. It took the frequency but the band says 75 meters, not 60 =
meters.
>I have the latest version of DXBase too. Has anyone else experienced =
this
>logging problem. :-)
>
>73,
>
>Art
>W2NRA
>
>_______________________________________________
>DXBase Reflector - Please visit us on the web at www.dxbase.com
>- - - - - - - - - - - - - - - - - - - - - - -
>To UNSUBSCRIBE please visit:
>http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - -
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase
=09
--__--__--
=09
Message: 13
From: "Steve Smith" <[email protected]>
To: <[email protected]>
Date: Sun, 6 Jul 2003 23:37:01 +0100
Subject: [DXBase] Backup
=09
Hi does anybody have a Bat file for backing up the files on DXBASE2003 =
=3D
on to a zip drive.
=09
=09
=09
Thanks Steve Smith
GI4XFN
=09
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed. To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html ---
=09
--__--__--
=09
Message: 14
From: "Jim McDonald" <[email protected]>
To: <[email protected]>
Subject: Re: [DXBase] 60m Logging
Date: Sun, 6 Jul 2003 16:04:09 -0700
=09
Think how nostalgic it would be to use a paper log!
=09
Jim N7US
=09
----- Original Message -----
From: "Jack" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Sunday, July 06, 2003 2:01 PM
Subject: Re: [DXBase] 60m Logging
=09
=09
The 60 mtr was not around when the latest version of DXbase was =
released.
It is therefore not a supported band at the present. It also is not =
valid
for any awards pending review by the various award sponsers. In order =
to
get the Qs into your log, it will be necessary to pick one of the bands =
that
you don't use and select that. You can also make a special entry into =
one
of the special fields or one of the user check box entries. This would =
let
you identify the 60mtr Qs in your log for the time being.
=09
Regards,
Jack
=09
=09
=09
----- Original Message -----
From: "Ed Parish K1EP" <[email protected]>
To: <[email protected]>
Sent: Sunday, July 06, 2003 4:00 PM
Subject: Re: [DXBase] 60m Logging
=09
=09
> Yes, but it says 75GHz. So, do we need an update to get it to say =
60M?
>
> At 03:59 PM 7/3/03 -0400, Art Searle wrote:
> >Hi All,
> >
> >Gee I don't understand what's goin' on here. I logged a contact on =
60
> >meters. It took the frequency but the band says 75 meters, not 60
meters.
> >I have the latest version of DXBase too. Has anyone else =
experienced
this
> >logging problem. :-)
> >
> >73,
> >
> >Art
> >W2NRA
> >
> >_______________________________________________
> >DXBase Reflector - Please visit us on the web at www.dxbase.com
> >- - - - - - - - - - - - - - - - - - - - - - -
> >To UNSUBSCRIBE please visit:
> >http://mailman.qth.net/mailman/listinfo/dxbase
>
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - -
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
=09
=09
--__--__--
=09
_______________________________________________
DXBase mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dxbase
=09
=09
End of DXBase Digest
=09