[DXBase] QSL Card Design Problems

[Joe Glockner]

Art,

I hope that I can answer all of your questions:

(1) the VIA problem -- in the Appearance Condition for that
 TEXTBBOX - be sure and put    Len(MGR)>0

(2) I did my freq a bit different -- and if you want, you can
look at a webpage at my website at:

http://www.qsl.net/wa6axe/freqfrmt.html


(3) WRT the QSL card stock -- the one place that is available
and is GOOD is at:

http://www.hamstuff.com/QslKitPage/qslkit.html


Gud Luck!! 

73 de Joe WA6AXE

Art Searle wrote:
> 
> I've managed to create my own elaborate QSL card with DXBase and not without
> a very heavy learning curve (for me anyway).  I do have a couple of small
> problems, mostly involving formulas, that I haven't been able to resolve.
> 
> 1) VIA - My via command is:  If(MGR<>CALL,"via  "+MGR,"")
> But sometimes the VIA prints even with the MGR = CALL, Other cases don't.
> 
> 2) Frequency in MHz with 3 decimal places - I am trying to divide the
> frequency by 1000 and still show 3 decimal places, for example 14.025
> My command for this is: val(Fstr$((Val(FREQ)/1000),"###&.###"))
> But all I get in the above example is 14.03
> Any ideas?
> 
> And a couple of questions:
> 
> 1)  I chose 5 x 3.5.  Where can I get perforated (I assume) paper stock for
> this?
> 
> 2) Is there much of a selection of different weight and finishes?
> 
> Boy is this tedious.  So far I have this:
> http://www.birdsandbeacons.com/qrp/
> 
> Help,
> 
> Art
> W2NRA
> 
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase