[DXBase] Rig Control: 756PROII & PW-1

[TNeill1648@aol.com]

I sincerely appreciate the suggestions from the knowledgeable DXBase users 
and I finally got the ICOM 756PROII, PW-1, and DXBase to all work together.  
I must say it is a neat operating combination.

Several  requested that I post the settings that worked once it was 
operational and here they are:

1.  Use the CT-17 converter:  Connect the serial port from computer and 
remote line from PW-1 to the CT-17 box
2.  Baud set to auto on the PROII
3.  Address in PROII set to 64h
4.  IN DXBase the following settings were used:
Model:  ICOM 756PROII VFO A Only
COM: 2
Baudrate:  4800
Parity: None
Word Length: 8
Stop Bits: 2
Default DTR High is checked ON

If anyone has and suggested improvements I would appreciate hearing from you. 
 Thanks again for all of the recommendations. 

Tom Neill K4XG
Windy Hills Farm
College Grove, TN


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---