[DXBase] Fw: Internet cluster

Sun, 3 Nov 2002 23:35:06 -0600

That should have been:  type C:\command    forgot the ":".  The purpose of
including the C:\ is to get you to the root to execute the 'command'.

Ron
----- Original Message -----
From: "Ron Stordahl" <[email protected]>
To: "Mail fromJim/Connie" <[email protected]>; <[email protected]>
Sent: Sunday, November 03, 2002 11:31 PM
Subject: Re: [DXBase] Fw: Internet cluster

> First let's determine if you have internet access to any cluster via
telnet:
>
> At the lower left hand corner click Start, then Run.  This will open a Run
> box.  In that type C\command
>
> Now you will have a DOS box with a  C:\> prompt.  Type telnet dxspots.com
> and hit the enter key.
>
> This should open a Telnet window saying you are connected to N5IN at
> 204.21.76.52.
>
> Did you get this far?  If you did, then we can take the next step, but
let's
> see if you get this far first.
>
> Ron N5IN
>
>
>
> ----- Original Message -----
> From: "Mail fromJim/Connie" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, November 03, 2002 11:13 PM
> Subject: [DXBase] Fw: Internet cluster
>
>
> >
> >
> >
> > I recently installed DXbase 2003 and used all the same settings as I had
> in
> > DXbase 2002 for the Internet Cluster (TOOLS, OPTIONS,  USER OPTIONS,
> > INTERNET)
> > The Internet Cluster worked fine on DXbase 2002.
> >  I can not get the same cluster site ( or any other site) to connect
> through
> > DXbase 2003.
> > I have no problem getting the site up and running when not using DXbase
> > 2003.
> > I can't getting any cluster sites to conect through DXbase 2003.
> >  I have checked and re-checked my settings in the INTERNET site settings
> and
> > they are the same as my DXbase 2002 settings.
> > Any suggestions?
> >
> > Jim VA6JR
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> >
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>