[DXBase] ZD7..wrong ITU Zone

[Ron Stordahl]

Thanks Fred!

I have gone through all my cards and matched them against my data
base...using the Wizard and printing using User Designed List and Logbook as
the output form.  While I did this I checked CQ-Zone & ITU-Zone and added
IOTA and Grids where shown on the cards.  I have been doing this in my
'spare time' (what's that?) for about a month.  As of this moment my 6420
confirmed Q's match my cards exactly.  Keeping things in sync from this
point is going to be the challenge.

During the process I found quite a few new band modes that somehow never got
marked as received in my log,   No new countries however--still at 325 wkd &
confirmed.

I file my cards in this box: 902-94-BLA with 1/3 cut index card dividers:
902-11-801 from http://www.quill.com

These are designed for 4 x 6 cards and QSL's fit in perfectly.

Ron N5IN

----- Original Message -----
From: "Fred Handscombe" <fredch@homeshack.freeserve.co.uk>
To: "Ron Stordahl" <ronald.stordahl@mailhub.digikey.com>
Sent: Thursday, August 08, 2002 1:16 AM
Subject: Re: [DXBase] ZD7..wrong ITU Zone


> Well spotted!
>
> 73 Fred
> G4BWP
>
> ----- Original Message -----
> From: "Ron Stordahl" <ronald.stordahl@digikey.com>
> To: "Jack" <jack@dxbase.com>; "DXBase" <dxbase@mailman.qth.net>
> Sent: Thursday, August 08, 2002 2:03 AM
> Subject: [DXBase] ZD7..wrong ITU Zone
>
>
> Just noticed that ZD7 is set as ITU 68 in the countries data base...it
should
> be ITU 66.  This is in DXB2003, don't know about earlier releases.
>
> Ron N5IN
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>
>
>


----- Original Message -----
From: "Fred Handscombe" <fredch@homeshack.freeserve.co.uk>
To: "Ron Stordahl" <ronald.stordahl@mailhub.digikey.com>
Sent: Thursday, August 08, 2002 1:16 AM
Subject: Re: [DXBase] ZD7..wrong ITU Zone


> Well spotted!
>
> 73 Fred
> G4BWP
>
> ----- Original Message -----
> From: "Ron Stordahl" <ronald.stordahl@digikey.com>
> To: "Jack" <jack@dxbase.com>; "DXBase" <dxbase@mailman.qth.net>
> Sent: Thursday, August 08, 2002 2:03 AM
> Subject: [DXBase] ZD7..wrong ITU Zone
>
>
> Just noticed that ZD7 is set as ITU 68 in the countries data base...it
should
> be ITU 66.  This is in DXB2003, don't know about earlier releases.
>
> Ron N5IN
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>
>
>